Does this shock fit the left front as well?

No. It is built for the right front corner only. The left side is a separate part, VBADA-11544-L, which BA also lists. TEIN sells EnduraPro Plus dampers individually, so you can replace one worn front shock or order both sides together for an even front axle.

Is the EnduraPro Plus Front Right Shock adjustable?

Yes. A dial sets compression and rebound together through 16 levels, softer for comfort or firmer for control. TEIN lists EnduraPro Plus as EDFC compatible except on some models, so check with BA before buying an EDFC motor kit and controller for this Tesla.

Can I keep my stock springs with it?

Yes. The lower spring seat follows the OE damper shape, so the factory spring and upper mount move straight across. TEIN also designs the EnduraPro range to accept TEIN lowering springs, so the same damper still suits the car if it is lowered on springs later.

Which Tesla models and years does it cover?

The TEIN EnduraPro Plus Front Right Shock is listed for the dual-motor, all-wheel-drive Model 3 from 2017 and Model Y from 2020 to 2025. Rear-wheel-drive cars are not covered. Year coverage comes from distributor data, so confirm your build year with BA.

How long does it take to arrive?

Lead time is set by TEIN and varies. This shock is a special order that Turn 14 does not stock, so BA confirms availability and timing when the order is placed. Once ordered it cannot be cancelled or returned, so confirm the corner and year first.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

TEIN EnduraPro Plus Front Right Shock for AWD Tesla Model 3 and Model Y

TEIN’s EnduraPro Plus Front Right Shock is the right-hand front damper for the all-wheel-drive Tesla Model 3 and Model Y, made to the OE shape so the factory spring and upper mount carry over. A dial on the unit sets compression and rebound together across 16 levels. TEIN sells EnduraPro dampers one at a time, so a single worn corner can be replaced on its own, and the matching left unit is a separate part. It does not change ride height.

Construction and Bump Control

After the oil and gas fill, TEIN narrows and crimps the top of the twin-tube shell to seal it. The shell is wider than OE to carry more oil, and in its own example TEIN quotes 510 MPa tensile strength against 340 MPa for the OE shell, a figure that varies by model. The Hydraulic Bump Stopper raises damping near full compression, with a relief valve to keep that rise from spiking.

Features

Front right corner only, for dual-motor AWD Model 3 and Model Y
16-level dial adjusts compression and rebound together
OE-shape lower spring seat takes the factory spring and upper mount
Accepts TEIN lowering springs as well as the stock springs
EDFC compatible on most EnduraPro Plus models, with some exceptions
TEIN-green 2-layer, 1-bake powder coat (patent 4347712) for snowy and coastal regions

Applications

Tesla Model 3 (AWD): 2017-present | dual motor
Tesla Model Y (AWD): 2020-2025 | dual motor

Notes

Special order through BA: TEIN lead time varies, and the shock cannot be cancelled or returned once ordered
Covers the front right corner only; pair it with the TEIN EnduraPro Plus Front Left Shock for a matched front axle
Turn 14 lists the EnduraPro Plus Front Right Shock as the successor to the discontinued VBGP4-11544-R
Confirm your Tesla model year with BA before ordering, since year coverage comes from distributor data
The photo is the EnduraPro Plus Tesla damper set, shown as a representative image of this single shock

Frequently Asked Questions

Does this shock fit the left front as well? No. It is built for the right front corner only. The left side is a separate part, VBADA-11544-L, which BA also lists. TEIN sells EnduraPro Plus dampers individually, so you can replace one worn front shock or order both sides together for an even front axle.
Is the EnduraPro Plus Front Right Shock adjustable? Yes. A dial sets compression and rebound together through 16 levels, softer for comfort or firmer for control. TEIN lists EnduraPro Plus as EDFC compatible except on some models, so check with BA before buying an EDFC motor kit and controller for this Tesla.
Can I keep my stock springs with it? Yes. The lower spring seat follows the OE damper shape, so the factory spring and upper mount move straight across. TEIN also designs the EnduraPro range to accept TEIN lowering springs, so the same damper still suits the car if it is lowered on springs later.
Which Tesla models and years does it cover? The TEIN EnduraPro Plus Front Right Shock is listed for the dual-motor, all-wheel-drive Model 3 from 2017 and Model Y from 2020 to 2025. Rear-wheel-drive cars are not covered. Year coverage comes from distributor data, so confirm your build year with BA.
How long does it take to arrive? Lead time is set by TEIN and varies. This shock is a special order that Turn 14 does not stock, so BA confirms availability and timing when the order is placed. Once ordered it cannot be cancelled or returned, so confirm the corner and year first.

About TEIN

TEIN was founded in Yokohama, Japan, in 1985 by former rally mechanic Hakaru Ichino, joined soon after by driver Yoshio Fujimoto. The team reached the World Rally Championship in 1989, and in 1995 Fujimoto won the Safari Rally in a Toyota Celica GT-FOUR, the first Japanese driver to do so. TEIN launched its own dampers in 1990 and came to supply around 80 percent of the dampers in the N1 Taikyu endurance series. TEIN USA has served the Americas from Downey, California, since 2001.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

TEIN EnduraPro Plus Front Right Shock for AWD Tesla Model 3 and Model Y [VBADA-11544-R]

Guaranteed Safe Checkout

TEIN EnduraPro Plus Front Right Shock for AWD Tesla Model 3 and Model Y

Construction and Bump Control

Features

Applications

Notes

Frequently Asked Questions

About TEIN

Reviews