Will the fender fit with my factory front bumper?

Yes, with work. The fender is designed for the aero bumpers from the same maker and for the factory front bumper, but on the factory bumper or another brand of bumper the supplied bumper extension has to be modified to make the joint fit. Budget for that trimming plus paint, which is not included.

How much wider is the Type-S Front Fender for AP1 cars?

The Type-S Front Fender for AP1 and AP2 cars is 35mm wider than the factory fender, according to the manufacturer. No tire or wheel sizes are specified by the manufacturer, but the shape is designed to extract air from inside the wheel arch through the side of the body.

Is it sold as a pair?

No. Each fender is sold individually as a left or right side, and each side includes its own bumper extension and inner air guide. Order one of each for a complete car. The price shown applies to a single side, so add both to the cart if both fenders are needed.

Is it suitable for street driving?

Yes. The manufacturer describes the fender as suited to everything from street driving to circuit use. It mounts with the supplied bumper extension and inner air guide, and the side opening stays open for street use unless the optional duct set is fitted for a high-speed circuit setup.

What are the fender ducts for?

The optional fender duct set covers the side opening and stops air from being drawn in from the side of the car. That is a high-speed circuit setting. The ducts come in FRP or carbon FRP, are sold separately, and fit only this Type-S wide fender.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

J’s Racing Type-S Front Fender for AP1 / AP2 Honda S2000

J’s Racing’s Type-S Front Fender for AP1 and AP2 S2000s is a wide front fender that sits 35mm wider than the factory part and is shaped to manage the air inside the wheel arch. Air churned up by the spinning wheel is pulled out through the side of the body rather than left to build up in the arch, which J’s says reduces drag and raises top speed. It works with J’s aero bumpers and, with some trimming, the factory bumper. J’s pitches it at drivers on both street and circuit; owners who want to keep factory width should stay with the standard fenders.

Tips

Each side ships with a bumper extension and an inner air guide. J’s notes that with a factory or other-brand bumper, the extension must be modified to blend the joint, so allow body shop time for that. The optional fender duct set closes off the side opening for high-speed circuit setups, preventing air from being drawn in there.

Features

35mm wider than the factory front fender
Extracts churned wheel arch air through the side of the body
Lower drag and higher top speed, per J’s Racing
Compatible with J’s aero bumpers and the factory front bumper
FRP in black gelcoat, ready for paint

What’s Included

Type-S wide front fender for the selected side
Bumper extension
Inner air guide

Applications

Honda S2000: AP1 | 1999-2003 | 2.0L F20C
Honda S2000: AP2 | 2004-2009 | 2.2L F22C

Notes

Fitting with the factory bumper or another brand of bumper requires modification of the bumper extension
Sold per side; order both Left and Right for a complete car, as the options differ only by side
Paint for the fender and bumper extension is not included
The optional Type-S Fender Ducts for the AP1 / AP2 S2000 are sold separately
Every fender is produced in Japan; once you order, Bulletproof Automotive works with J’s Racing USA to confirm availability and lead time

Frequently Asked Questions

Will the fender fit with my factory front bumper? Yes, with work. The fender is designed for the aero bumpers from the same maker and for the factory front bumper, but on the factory bumper or another brand of bumper the supplied bumper extension has to be modified to make the joint fit. Budget for that trimming plus paint, which is not included.
How much wider is the Type-S Front Fender for AP1 cars? The Type-S Front Fender for AP1 and AP2 cars is 35mm wider than the factory fender, according to the manufacturer. No tire or wheel sizes are specified by the manufacturer, but the shape is designed to extract air from inside the wheel arch through the side of the body.
Is it sold as a pair? No. Each fender is sold individually as a left or right side, and each side includes its own bumper extension and inner air guide. Order one of each for a complete car. The price shown applies to a single side, so add both to the cart if both fenders are needed.
Is it suitable for street driving? Yes. The manufacturer describes the fender as suited to everything from street driving to circuit use. It mounts with the supplied bumper extension and inner air guide, and the side opening stays open for street use unless the optional duct set is fitted for a high-speed circuit setup.
What are the fender ducts for? The optional fender duct set covers the side opening and stops air from being drawn in from the side of the car. That is a high-speed circuit setting. The ducts come in FRP or carbon FRP, are sold separately, and fit only this Type-S wide fender.

About J’s Racing

J’s Racing was established in Osaka in 1989, as VTEC engines and lightweight Civics and Integras were changing what a Honda could do, and it has built parts for Hondas ever since. The company develops engine response, suspension, braking, cooling and aerodynamics together as one system, then proves the parts in time attack, gymkhana, endurance and circuit racing. Its Fit lapped Tsukuba Circuit in 1’00.459, and its naturally aspirated AP1 S2000, the Maou car, became the company’s reference build for the Honda roadster. Every J’s Racing part is designed and tested in Japan, and J’s Racing USA in Carson, California handles distribution in the United States.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

J’s Racing Type-S Front Fender for AP1 / AP2 Honda S2000

Guaranteed Safe Checkout

J’s Racing Type-S Front Fender for AP1 / AP2 Honda S2000

Tips

Features

What’s Included

Applications

Notes

Frequently Asked Questions

About J’s Racing

Reviews