How does the Rear Bumper Valance for McLaren 720S differ from the bumper shell?

The Rear Bumper Valance for McLaren 720S cars covers the lower band of the rear bumper above the diffuser, while the RYFT rear bumper shell with side vents replaces the outer skin of the whole bumper. The valance is the smaller and less expensive change, at 5,200 dollars against 12,000 dollars for the shell.

Which factory trim does the valance take over from?

McLaren calls this area the rear bumper lower and finished it in Dark Palladium on Luxury and Performance cars, with gloss visual carbon available in Exterior Carbon Fibre Pack 2. Bulletproof Automotive confirms fitment details with RYFT before ordering so the valance suits the trim fitted to the car.

Which body styles is the RYFT valance listed for?

RYFT lists the valance for McLaren 720S cars as a single part and reserves Coupe and Spider versions for areas where the bodies differ, mostly around the roof and engine cover. The Spider gained new underfloor aerodynamics with its active rear spoiler, which is worth mentioning when ordering for an open car.

Should the valance and diffuser be fitted together?

Yes, where possible. The valance and diffuser meet directly, so fitting both at once lets the installer set the gap between them in one visit and see both pieces in the same weave together. If the car already has the RYFT diffuser, the valance can still be added later.

How should a carbon rear valance be cleaned?

The lower rear of a car collects road film and exhaust soot, so wash the valance gently with a pH neutral shampoo after rinsing off loose grit. Avoid strong degreasers on the clear finish and protect the carbon with a UV stable ceramic coating so soot lifts more easily next time.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

RYFT Carbon Fiber Rear Bumper Valance for McLaren 720S

RYFT’s rear bumper valance for McLaren 720S cars covers the area McLaren calls the rear bumper lower, the band of the rear bumper just above the diffuser. McLaren finished it in Dark Palladium on Luxury and Performance cars and offered it in gloss visual carbon through Exterior Carbon Fibre Pack 2, together with the front splitter. The RYFT valance gives the same area its own sharper shape, and we would fit it with the RYFT diffuser, because the two meet directly.

Design

McLaren’s own pairing of the front splitter with the rear bumper lower in one carbon pack shows how the company saw the car: carbon at the lowest edge at both ends. RYFT follows that logic with its front lip at the nose and this valance at the tail, both in 2×2 twill and drawn with the P1 inspired curves RYFT describes for the 720S. It is a smaller step than the full rear bumper shell and suits owners who want the rear to change without replacing the bumper.

Features

2×2 twill carbon fiber for the lower rear bumper
Alternative to the Dark Palladium or McLaren Pack 2 finish
Sits between the rear diffuser and the bumper above
A smaller rear upgrade than the full bumper shell

Applications

McLaren 720S: P14 | 2018-2023 | 4.0L M840T twin-turbo V8

Notes

RYFT catalogues the Rear Bumper Valance for McLaren 720S cars without a Coupe or Spider version
750S owners should look at the RYFT Carbon Fiber Rear Valance for McLaren 750S
Fit it with the RYFT Carbon Fiber Rear Diffuser for McLaren 720S, and pair it with the RYFT Carbon Fiber Front Lip for McLaren 720S at the other end
Explore the RYFT 720S carbon program

Frequently Asked Questions

How does the Rear Bumper Valance for McLaren 720S differ from the bumper shell? The Rear Bumper Valance for McLaren 720S cars covers the lower band of the rear bumper above the diffuser, while the RYFT rear bumper shell with side vents replaces the outer skin of the whole bumper. The valance is the smaller and less expensive change, at 5,200 dollars against 12,000 dollars for the shell.
Which factory trim does the valance take over from? McLaren calls this area the rear bumper lower and finished it in Dark Palladium on Luxury and Performance cars, with gloss visual carbon available in Exterior Carbon Fibre Pack 2. Bulletproof Automotive confirms fitment details with RYFT before ordering so the valance suits the trim fitted to the car.
Which body styles is the RYFT valance listed for? RYFT lists the valance for McLaren 720S cars as a single part and reserves Coupe and Spider versions for areas where the bodies differ, mostly around the roof and engine cover. The Spider gained new underfloor aerodynamics with its active rear spoiler, which is worth mentioning when ordering for an open car.
Should the valance and diffuser be fitted together? Yes, where possible. The valance and diffuser meet directly, so fitting both at once lets the installer set the gap between them in one visit and see both pieces in the same weave together. If the car already has the RYFT diffuser, the valance can still be added later.
How should a carbon rear valance be cleaned? The lower rear of a car collects road film and exhaust soot, so wash the valance gently with a pH neutral shampoo after rinsing off loose grit. Avoid strong degreasers on the clear finish and protect the carbon with a UV stable ceramic coating so soot lifts more easily next time.

About RYFT

RYFT is an American performance house building titanium exhausts, carbon fiber exterior parts and spring kits for Ferrari, Lamborghini, McLaren, Porsche, Audi and Chevrolet performance vehicles. Its titanium exhausts are made by hand around RYFT’s proprietary velocity loops, its carbon fiber exterior parts are made in exposed weave for specific models, and its spring kits are developed with Moton Suspension. The HYPR Titanium system for the Lamborghini Revuelto is designed, tested and manufactured in the USA with 3D-printed titanium collectors and tips.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

RYFT Carbon Fiber Rear Bumper Valance for McLaren 720S [29-20-1023]

Guaranteed Safe Checkout

RYFT Carbon Fiber Rear Bumper Valance for McLaren 720S

Design

Features

Applications

Notes

Frequently Asked Questions

About RYFT

Reviews