Do the GiroDisc Front Rotors for Kia Stinger GT also fit the Genesis G70?

Yes. GiroDisc lists the GiroDisc Front Rotors for Kia Stinger GT models and the Genesis G70 under the same part number. Both cars use the factory calipers with this rotor, and GiroDisc describes it as a direct replacement that needs no modifications on either model.

Will the factory ABS and brake balance change after fitting these?

No. Because the rotor matches the original size and works with the factory calipers, the brake bias Kia and Genesis engineered stays the same and the ABS continues to work as designed. That is the main reason GiroDisc offers a replacement rotor rather than a big brake kit.

What replacement rings fit these front rotors?

GiroDisc part number D1-204 is the matching front ring set. It comes as a pair with new mounting hardware and bolts to the hats already on the car, so after the first purchase only the iron rings need replacing as they wear.

What does a two-piece floating rotor add over a one-piece disc?

Separating the iron ring from an aluminum hat lets the ring expand with heat without dragging the hat out of shape, and the aluminum center saves weight compared with an all-iron disc. When the ring wears, it is replaced on its own while the hat is kept.

Are these front rotors noisy at low speed?

No. GiroDisc fits anti-noise spring washers to the drive pins on the rotor side. They allow the ring to grow as it heats but hold it snugly when cold, so the knocking sound some floating rotors make at parking speeds is not part of the experience.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

GiroDisc Front Rotors for Kia Stinger GT and Genesis G70

GiroDisc’s Front Rotors for Kia Stinger GT and Genesis G70 sedans replace the factory front discs with a two-piece floating design built around a slotted iron ring and a 6061-T6 aluminum hat. GiroDisc lists it as a direct replacement: no modifications, the original calipers stay, and the factory brake bias and ABS tuning are kept. That makes it the measured upgrade for a Stinger GT or G70 owner who drives hard on mountain roads or at the occasional track day and wants the brakes to stay consistent.

Bolt-On and Go

Swap the rotors at the hub, refit the factory calipers and the job is done. GiroDisc positions this as the alternative to a big brake kit, so the car keeps the braking balance its engineers set. Inside each ring, curved vanes pull air in at the hub and throw it outward through the disc, while spring washers on the drive pins keep the floating ring from rattling when cold.

Features

Direct replacement for the factory front disc, no modifications
Works with the original front calipers
Factory brake bias and ABS behavior retained
Slotted ring cast from GiroDisc proprietary iron in the USA
6061-T6 aluminum hat carried on cadmium-plated alloy steel drive pins
Curved vanes for cooling airflow from hub to rim

What’s Included

Front rotor assemblies (L/R)

Applications

Genesis G70: Factory caliper fitment
Kia Stinger GT: 3.3L twin-turbo V6

Notes

The Front Rotors for Kia Stinger GT and Genesis G70 bolt on with the factory calipers and need no modifications
Worn rings are renewed with the GiroDisc Stinger and G70 front replacement rings, which bolt to these hats
The GiroDisc Stinger and G70 rear rotors complete the set
The cap screws are never tightened beyond 60 in-lb, or 7 Nm
Stock photography may not depict the actual product

Frequently Asked Questions

Do the GiroDisc Front Rotors for Kia Stinger GT also fit the Genesis G70? Yes. GiroDisc lists the GiroDisc Front Rotors for Kia Stinger GT models and the Genesis G70 under the same part number. Both cars use the factory calipers with this rotor, and GiroDisc describes it as a direct replacement that needs no modifications on either model.
Will the factory ABS and brake balance change after fitting these? No. Because the rotor matches the original size and works with the factory calipers, the brake bias Kia and Genesis engineered stays the same and the ABS continues to work as designed. That is the main reason GiroDisc offers a replacement rotor rather than a big brake kit.
What replacement rings fit these front rotors? GiroDisc part number D1-204 is the matching front ring set. It comes as a pair with new mounting hardware and bolts to the hats already on the car, so after the first purchase only the iron rings need replacing as they wear.
What does a two-piece floating rotor add over a one-piece disc? Separating the iron ring from an aluminum hat lets the ring expand with heat without dragging the hat out of shape, and the aluminum center saves weight compared with an all-iron disc. When the ring wears, it is replaced on its own while the hat is kept.
Are these front rotors noisy at low speed? No. GiroDisc fits anti-noise spring washers to the drive pins on the rotor side. They allow the ring to grow as it heats but hold it snugly when cold, so the knocking sound some floating rotors make at parking speeds is not part of the experience.

About GiroDisc

GiroDisc designs, manufactures, and sells 2-piece, fully floating brake rotors for a wide range of performance vehicles. Every major component, including the hats, rotor rings, and drive pins, is manufactured in-house at their facility in Bellingham, Washington, from domestically sourced materials. GiroDisc rotors use a proprietary high-carbon iron ring formulated for superior metallurgy and thermal performance, paired with reusable machined-aluminum hats that reduce the long-term cost of maintaining a high-performance brake system. The 2-piece floating design sheds unsprung and rotating mass while remaining street-friendly, delivering race-proven braking for track and street use alike.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

GiroDisc Front Rotors for Kia Stinger GT and Genesis G70 [A1-204]

Guaranteed Safe Checkout

GiroDisc Front Rotors for Kia Stinger GT and Genesis G70

Bolt-On and Go

Features

What’s Included

Applications

Notes

Frequently Asked Questions

About GiroDisc

Reviews