Is the Black Factory-Location Intercooler Redline Package street legal in California?

Yes. COBB lists CARB Executive Orders D-660-217 and D-660-245 for the Black Factory-Location Intercooler Redline Package, making it legal for sale and use on emissions controlled vehicles in all 50 states. Install the Accessport V3, the Redline intake and the intercooler following the COBB application guide to keep that status.

Does installing this intercooler require cutting the truck?

No. The intercooler mates snugly to the OEM shutter shroud, and COBB states that it needs no cutting, trimming or permanent modification. The Redline intake swaps out the factory airbox piping and lid. That suits owners who want the front of the truck left as Ford built it.

How does the factory location intercooler compare to the front mount version?

The factory location unit offers a core 70 percent larger than stock with 10 percent more cooling surface area. The front mount version uses a much larger 24 x 14 x 3.5 inch core but needs minor grille trimming. Pick on whether grille trimming is acceptable.

Can I add water or methanol injection later?

Yes. COBB cast two flat sections into the intercooler with that in mind. The top flat can be drilled and tapped to accept an injection nozzle, and the bottom flat can be used as a drain port. The injection system and its nozzle are not part of this package and must be sourced separately.

Which trucks does this package fit?

COBB confirms the package for the USDM 2020 Ford F-150 with the 3.5L EcoBoost. The included AP3-FOR-007 Accessport V3 is specific to that year and engine, so it does not suit 2.7L trucks, Raptors or other model years. Check your engine and year first.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

COBB Tuning 3.5L Stage 2 Black Factory-Location Intercooler Redline Package with Carbon Fiber Intake for P552 Ford F-150 (2020)

COBB Tuning’s Black Factory-Location Intercooler Redline Package brings Stage 2 to the 2020 F-150 3.5L EcoBoost with no cutting. It combines the AP3-FOR-007 Accessport V3, the 7F3160 Redline Carbon Fiber Intake System and the black 7F1527-BK intercooler, which sits in the factory location. CARB EO D-660-217 and D-660-245 cover every part for all 50 states. Owners chasing the biggest possible core should compare the FMIC version; for a clean upgrade with no permanent modification, this is the sensible pick.

Factory Location Intercooler

COBB designed this cast aluminum, TIG welded intercooler in house, using computational fluid dynamics to shape end tanks that spread flow evenly without significant turbulence. Two flat sections are cast into the housing: the top one can be drilled and tapped for a water or methanol injection nozzle, and the bottom one can serve as a drain. In the Black Factory-Location Intercooler Redline Package the core also offers 10 percent more cooling surface area than stock.

Features

Black cast aluminum, TIG welded intercooler in the factory location
Core 70% larger than stock with 10% more cooling surface area
End tanks shaped with computational fluid dynamics analysis
Cast flats ready for a water or methanol injection nozzle and drain
Gloss 3k 2×2 twill carbon fiber intake with bespoke airbox lid
Reusable dual inlet filter with 165% more surface area than stock
Accessport V3 compatible with COBB Off The Shelf maps

What’s Included

Accessport V3 (AP3-FOR-007)
Redline Carbon Fiber Intake System (7F3160)
Factory Location Intercooler, Black (7F1527-BK)
COBB Vehicle Badge (800200)

Applications

Ford F-150: P552 | 2020 | 3.5L EcoBoost | USDM

Notes

50-state legal with CARB EO D-660-217 and D-660-245 when installed per the COBB application guide
The intercooler needs no cutting, trimming or permanent modification to the truck
Water or methanol injection hardware is not included
Listed for the USDM 2020 F-150 with the 3.5L EcoBoost only
Installing the Accessport over anything other than OEM or COBB software may result in ECU or TCU failure

Frequently Asked Questions

Is the Black Factory-Location Intercooler Redline Package street legal in California? Yes. COBB lists CARB Executive Orders D-660-217 and D-660-245 for the Black Factory-Location Intercooler Redline Package, making it legal for sale and use on emissions controlled vehicles in all 50 states. Install the Accessport V3, the Redline intake and the intercooler following the COBB application guide to keep that status.
Does installing this intercooler require cutting the truck? No. The intercooler mates snugly to the OEM shutter shroud, and COBB states that it needs no cutting, trimming or permanent modification. The Redline intake swaps out the factory airbox piping and lid. That suits owners who want the front of the truck left as Ford built it.
How does the factory location intercooler compare to the front mount version? The factory location unit offers a core 70 percent larger than stock with 10 percent more cooling surface area. The front mount version uses a much larger 24 x 14 x 3.5 inch core but needs minor grille trimming. Pick on whether grille trimming is acceptable.
Can I add water or methanol injection later? Yes. COBB cast two flat sections into the intercooler with that in mind. The top flat can be drilled and tapped to accept an injection nozzle, and the bottom flat can be used as a drain port. The injection system and its nozzle are not part of this package and must be sourced separately.
Which trucks does this package fit? COBB confirms the package for the USDM 2020 Ford F-150 with the 3.5L EcoBoost. The included AP3-FOR-007 Accessport V3 is specific to that year and engine, so it does not suit 2.7L trucks, Raptors or other model years. Check your engine and year first.

About COBB Tuning

COBB Tuning was founded by Trey Cobb in 1999 in Rockwall, Texas, as a Subaru performance shop in the back of his father’s tire shop, and is now headquartered in Austin, Texas. In 2004 COBB introduced the Accessport, a handheld ECU tuning device that flashes COBB’s off-the-shelf maps or a custom tune and doubles as a real-time gauge and datalogger. The range has since grown from Subaru to Ford, Volkswagen, Audi, Porsche, Nissan, Honda, Mazda, Mitsubishi and Toyota platforms, with intakes, intercoolers, exhausts and flex fuel kits engineered alongside the tuning, and many COBB parts carry California Air Resources Board Executive Order numbers for use in all 50 states.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

COBB Tuning 3.5L Stage 2 Black Factory-Location Intercooler Redline Package with Carbon Fiber Intake for P552 Ford F-150 (2020) [FOR0070S20BK-RED]

Guaranteed Safe Checkout

COBB Tuning 3.5L Stage 2 Black Factory-Location Intercooler Redline Package with Carbon Fiber Intake for P552 Ford F-150 (2020)

Factory Location Intercooler

Features

What’s Included

Applications

Notes

Frequently Asked Questions

About COBB Tuning

Reviews