Which BMW M3 and 1M models do the Moton 1-Way Coilovers for E9X fit?

MOTON lists the Moton 1-Way Coilovers for E9X for the BMW M3 Sedan / Coupe / Convertible (E90 / E92 / E93, 2007 to 2013) and BMW 1M Coupe (E82, 2011 to 2012). Each 1-Way set is built to order in the Netherlands for that fitment, so confirm the exact model, year and any previous suspension changes with us before ordering.

How does the 1-Way kit compare with the other MOTON kits for the E9X M3 or 1M?

The 1-Way adjusts rebound only and leaves compression to MOTON valving, which makes it the simplest kit to set up on the E9X M3 or 1M. The 2-Way Clubsport adds compression adjustment on a remote reservoir. Every MOTON kit for the E9X M3 or 1M shares threaded ride height, non-inverted monotube construction and springs in the box.

What if the car has EDC?

MOTON notes that cars with EDC electronic damper control need a delete kit, ordered separately. The MOTON dampers have no electronic valves, so the factory system must be cancelled to avoid fault warnings. Ask us for the correct EDC delete part for an E9X M3 when ordering; the 1M was not offered with EDC.

What comes in the box?

Four non-inverted monotube coilovers with springs, each with a single rebound adjuster on the damper body, pillowball front camber plates, and a pair of adjustable aluminum front droplinks with M10 threads, built to order for the E9X M3 or 1M. Wheel spacers, any electronic damper cancellation and the alignment are not included, and the kit ships without spring preload set.

How difficult is installation on the E9X M3 or 1M?

It is a job for a qualified shop with a lift and a calibrated torque wrench. The kit arrives with no spring preload, so preload is set before the E9X M3 or 1M is lowered and ride height is measured afterwards. Overtightening the spring platform can deform the damper body, and an alignment should follow.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Moton 1-Way Coilovers for E9X BMW M3 and E82 1M

Moton’s 1-Way Coilovers for E9X BMW M3 and E82 1M are the simplest MOTON damper for the E9X M3 and 1M Coupe: a single rebound adjuster per corner, threaded ride height and springs supplied. The 1M Coupe borrowed much of its front and rear suspension from the E9X M3, which is why MOTON lists one set for the V8 M3 in all three body styles and the 1M. Leaving compression to MOTON’s valving keeps the E9X M3 or 1M kit simple: rebound sets how the car recovers, and the threaded bodies set its stance.

Design and Performance

The 1-Way gives the E9X M3 or 1M one rebound adjuster per corner and leaves compression to MOTON’s valving, the right amount of adjustment for a road car with occasional track days. For compression control, step up to the Moton 2-Way Clubsport Coilovers for the E9X M3 or 1M.

Features

Non-inverted monotube dampers, adjustable for rebound
Threaded ride height at all four corners
Pillowball front camber plates
Elevated top guide with helper piston
Adjustable aluminum front droplinks, DLA-10-258-276, M10, 258 mm to 276 mm
Fully rebuildable, 24-month AST x MOTON warranty

What’s Included

Front coilovers (L/R)
Rear coilovers (L/R)
Front and rear springs
Pillowball front camber plates (L/R)
Adjustable front droplinks (x2)

Applications

BMW M3 Sedan / Coupe / Convertible: E90 / E92 / E93 | 2007-2013
BMW 1M Coupe: E82 | 2011-2012

Notes

The Moton 1-Way Coilovers for E9X fit the E90, E92 and E93 M3 and the E82 1M Coupe
E9X M3s with EDC need an EDC delete kit, sold separately; ask us for the correct part
Keep at least 5 mm between wheel and damper; some factory wheels need a spacer
Kits are built to order in the Netherlands; lead time is confirmed at order
Images show representative MOTON kits

Frequently Asked Questions

Which BMW M3 and 1M models do the Moton 1-Way Coilovers for E9X fit? MOTON lists the Moton 1-Way Coilovers for E9X for the BMW M3 Sedan / Coupe / Convertible (E90 / E92 / E93, 2007 to 2013) and BMW 1M Coupe (E82, 2011 to 2012). Each 1-Way set is built to order in the Netherlands for that fitment, so confirm the exact model, year and any previous suspension changes with us before ordering.
How does the 1-Way kit compare with the other MOTON kits for the E9X M3 or 1M? The 1-Way adjusts rebound only and leaves compression to MOTON valving, which makes it the simplest kit to set up on the E9X M3 or 1M. The 2-Way Clubsport adds compression adjustment on a remote reservoir. Every MOTON kit for the E9X M3 or 1M shares threaded ride height, non-inverted monotube construction and springs in the box.
What if the car has EDC? MOTON notes that cars with EDC electronic damper control need a delete kit, ordered separately. The MOTON dampers have no electronic valves, so the factory system must be cancelled to avoid fault warnings. Ask us for the correct EDC delete part for an E9X M3 when ordering; the 1M was not offered with EDC.
What comes in the box? Four non-inverted monotube coilovers with springs, each with a single rebound adjuster on the damper body, pillowball front camber plates, and a pair of adjustable aluminum front droplinks with M10 threads, built to order for the E9X M3 or 1M. Wheel spacers, any electronic damper cancellation and the alignment are not included, and the kit ships without spring preload set.
How difficult is installation on the E9X M3 or 1M? It is a job for a qualified shop with a lift and a calibrated torque wrench. The kit arrives with no spring preload, so preload is set before the E9X M3 or 1M is lowered and ride height is measured afterwards. Overtightening the spring platform can deform the damper body, and an alignment should follow.

About Moton

MOTON Suspension Technology was founded in the Netherlands in 1999, and by June 2000 around 30 percent of the cars at the 24 Hours of Le Mans ran its dampers. MOTON has since won in the FIA GT and FIA Sportscar championships, the ETCC and WTCC, Grand-Am and World Challenge. AST Suspension acquired the brand in 2011, and every MOTON damper is now developed, tested and built by the AST x MOTON team in the Netherlands, part of the Roosen Industries group since 2016.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Moton 1-Way Coilovers for E9X BMW M3 and E82 1M [M 505 168SD]

Guaranteed Safe Checkout

Moton 1-Way Coilovers for E9X BMW M3 and E82 1M

Design and Performance

Features

What’s Included

Applications

Notes

Frequently Asked Questions

About Moton

Reviews