Which Nissan Skyline GT-R models do the Moton 1-Way Coilovers for R34 fit?

MOTON lists the Moton 1-Way Coilovers for R34 for the Nissan Skyline GT-R (BNR34, 1999 to 2002) and Nissan Skyline GT-R (BNR33, 1995 to 1998). Each 1-Way set is built to order in the Netherlands for that fitment, so confirm the exact model, year and any previous suspension changes with us before ordering.

How does the 1-Way kit compare with the other MOTON kits for the R34 GT-R?

The 1-Way adjusts rebound only and leaves compression to MOTON valving, which makes it the simplest kit to set up on the R34 GT-R. The 2-Way Clubsport adds compression adjustment on a remote reservoir. The 3-Way Motorsport splits compression into separate low-speed and high-speed circuits. Every MOTON kit for the R34 GT-R shares threaded ride height, non-inverted monotube construction and springs in the box.

Does the GT-R kit include top mounts?

Yes. MOTON supplies this set with top mounts for the Skyline GT-R, so the factory mounts are not reused. That matters on an R33 or R34 that is now more than twenty years old, where the original rubber mounts are often worn, and it saves sourcing them separately.

What comes in the box?

Four non-inverted monotube coilovers with springs, each with a single rebound adjuster on the damper body, top mounts, built to order for the R34 GT-R. Wheel spacers, any electronic damper cancellation and the alignment are not included, and the kit ships without spring preload set.

How difficult is installation on the R34 GT-R?

It is a job for a qualified shop with a lift and a calibrated torque wrench. The kit arrives with no spring preload, so preload is set before the R34 GT-R is lowered and ride height is measured afterwards. Overtightening the spring platform can deform the damper body, and an alignment should follow.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Moton 1-Way Coilovers for R34 / R33 Nissan Skyline GT-R

Moton’s 1-Way Coilovers for R34 / R33 Nissan Skyline GT-R fit the R34 and R33 Skyline GT-R with non-inverted monotube dampers that adjust for rebound and ride height and arrive with springs. The R33 and R34 Skyline GT-R both use the RB26DETT twin-turbo six and ATTESA E-TS all-wheel drive, and MOTON lists this 1-way set for both generations with top mounts included. Compression is left to MOTON’s fixed valving, so the one choice at the car is how quickly each corner of the R34 GT-R settles after a bump. For an R34 GT-R that sees mostly road miles and a few track days a year, it is the right amount of adjustment.

Design and Performance

Rebound sets how quickly each damper extends after compressing, which decides how the R34 GT-R settles after crests and kerbs. The 1-Way gives one adjuster per corner for exactly that and leaves compression to MOTON’s valving, the right amount of adjustment for a road car with occasional track days. For compression control on the R34 GT-R, step up to the Moton 2-Way Clubsport Coilovers or the Moton 3-Way Motorsport Coilovers.

Features

Non-inverted monotube dampers, adjustable for rebound
Threaded ride height at all four corners
Top mounts included
Elevated top guide with helper piston
Fully rebuildable, 24-month AST x MOTON warranty

What’s Included

Front coilovers (L/R)
Rear coilovers (L/R)
Front and rear springs
Top mounts

Applications

Nissan Skyline GT-R: BNR34 | 1999-2002
Nissan Skyline GT-R: BNR33 | 1995-1998

Notes

The Moton 1-Way Coilovers for R34 fit the BNR33 and BNR34 Skyline GT-R with top mounts included
Keep at least 5 mm between wheel and damper; some factory wheels need a spacer
Kits are built to order in the Netherlands; lead time is confirmed at order
Images show representative MOTON kits

Frequently Asked Questions

Which Nissan Skyline GT-R models do the Moton 1-Way Coilovers for R34 fit? MOTON lists the Moton 1-Way Coilovers for R34 for the Nissan Skyline GT-R (BNR34, 1999 to 2002) and Nissan Skyline GT-R (BNR33, 1995 to 1998). Each 1-Way set is built to order in the Netherlands for that fitment, so confirm the exact model, year and any previous suspension changes with us before ordering.
How does the 1-Way kit compare with the other MOTON kits for the R34 GT-R? The 1-Way adjusts rebound only and leaves compression to MOTON valving, which makes it the simplest kit to set up on the R34 GT-R. The 2-Way Clubsport adds compression adjustment on a remote reservoir. The 3-Way Motorsport splits compression into separate low-speed and high-speed circuits. Every MOTON kit for the R34 GT-R shares threaded ride height, non-inverted monotube construction and springs in the box.
Does the GT-R kit include top mounts? Yes. MOTON supplies this set with top mounts for the Skyline GT-R, so the factory mounts are not reused. That matters on an R33 or R34 that is now more than twenty years old, where the original rubber mounts are often worn, and it saves sourcing them separately.
What comes in the box? Four non-inverted monotube coilovers with springs, each with a single rebound adjuster on the damper body, top mounts, built to order for the R34 GT-R. Wheel spacers, any electronic damper cancellation and the alignment are not included, and the kit ships without spring preload set.
How difficult is installation on the R34 GT-R? It is a job for a qualified shop with a lift and a calibrated torque wrench. The kit arrives with no spring preload, so preload is set before the R34 GT-R is lowered and ride height is measured afterwards. Overtightening the spring platform can deform the damper body, and an alignment should follow.

About Moton

MOTON Suspension Technology was founded in the Netherlands in 1999, and by June 2000 around 30 percent of the cars at the 24 Hours of Le Mans ran its dampers. MOTON has since won in the FIA GT and FIA Sportscar championships, the ETCC and WTCC, Grand-Am and World Challenge. AST Suspension acquired the brand in 2011, and every MOTON damper is now developed, tested and built by the AST x MOTON team in the Netherlands, part of the Roosen Industries group since 2016.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Moton 1-Way Coilovers for R34 / R33 Nissan Skyline GT-R [M 502 012S]

Guaranteed Safe Checkout

Moton 1-Way Coilovers for R34 / R33 Nissan Skyline GT-R

Design and Performance

Features

What’s Included

Applications

Notes

Frequently Asked Questions

About Moton

Reviews