Will the Front Splitter Kit for ZN6 fit a 2015 Scion FR-S?

No. The Front Splitter Kit for ZN6 bolts only to the 2017 and later bumper used on the Toyota 86 and Subaru BRZ through 2020. Verus Engineering makes a separate Two-Piece Front Splitter for the 2013-2016 bumper found on the Scion FR-S and early BRZ, so check the model year of the bumper before ordering.

Do I need to buy the race upgrade kit separately?

No. Verus Engineering includes its race upgrade kit with every 2017-2020 Front Splitter Kit, because of where the splitter mounts on the later bumper. The box holds the blade, four crash beam brackets, two splitter tie assemblies, two clevises, a support bracket and the hardware, with splitter support rods that mount to the chassis.

How does this kit differ from the Verus two-piece splitter for 2017-2020 cars?

This kit uses a single blade of the 2017 and later design with the race upgrade kit included. The Two-Piece Front Splitter divides the blade into halves, which Verus Engineering says lowers shipping cost and lets an owner replace one damaged half without buying a whole blade. Both use hard plastic and both bolt to the 2017-2020 bumper.

Will the splitter bend under the car if it hits something?

No. Verus Engineering builds the blade from a hard, stiff plastic that does not pull under the car the way aluminum splitters can, and the material resists cracking when struck from below. Support rods tie the splitter to the chassis so it holds its position at speed, which matters on a car that sees both track days and steep driveways.

What does a front splitter do on the 86 and BRZ?

A front splitter reduces front-end lift, which adds traction at the front tires at high speed. Verus Engineering also lists lower drag, better overall aerodynamic efficiency and reduced lap times among its benefits. Verus sized this one with analysis software so it balances the car with the various Ventus packages for the 86 and BRZ.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Verus Engineering Front Splitter Kit for ZN6 Toyota 86 and ZC6 Subaru BRZ (2017-2020)

Verus Engineering’s Front Splitter Kit for ZN6 Toyota 86 and ZC6 Subaru BRZ (2017-2020) is the street splitter for the facelifted cars, and it bolts to the 2017 and later bumper only. It fights front-end lift and trims drag, adding traction at high speed with a blade of hard, stiff plastic that resists cracking when struck from below and will not pull under the car the way aluminum blades can. Because of where this splitter mounts on the later bumper, Verus ships the 2017-2020 kit with its race upgrade kit already included. A 2013-2016 FR-S or BRZ needs the early-bumper splitter instead.

Features

Hard, durable plastic blade that resists cracking from below
Will not pull under the car like aluminum splitters
Chassis-mounted splitter support rods
Race upgrade kit included as standard on this kit
CFD tested and made in the U.S.A.

What’s Included

Splitter blade, 2017 and later design
Crash beam brackets (x4)
Splitter tie assemblies (x2)
Splitter clevises (x2)
Splitter support bracket
Hardware kit with all hardware needed for the install

Applications

Subaru BRZ: ZC6 | 2017-2020
Toyota 86: ZN6 | 2017-2020

Notes

The Front Splitter Kit for ZN6 bolts to 2017-2020 bumpers only; for 2013-2016 cars, choose the Two-Piece Front Splitter for 2013-2016 cars
This kit uses a single blade; the Two-Piece Front Splitter for 2017-2020 cars fits the same bumper and splits the blade in two so a damaged half can be replaced alone
Verus designed it as the front of its Ventus 1 package, alongside the Rear Diffuser
An install manual and an install video are available from Verus for this splitter kit
See every Verus Engineering part for the ZN6 Toyota 86, Scion FR-S and ZC6 Subaru BRZ
Verus covers its parts with a 1-year limited warranty against manufacturing defects

Frequently Asked Questions

Will the Front Splitter Kit for ZN6 fit a 2015 Scion FR-S? No. The Front Splitter Kit for ZN6 bolts only to the 2017 and later bumper used on the Toyota 86 and Subaru BRZ through 2020. Verus Engineering makes a separate Two-Piece Front Splitter for the 2013-2016 bumper found on the Scion FR-S and early BRZ, so check the model year of the bumper before ordering.
Do I need to buy the race upgrade kit separately? No. Verus Engineering includes its race upgrade kit with every 2017-2020 Front Splitter Kit, because of where the splitter mounts on the later bumper. The box holds the blade, four crash beam brackets, two splitter tie assemblies, two clevises, a support bracket and the hardware, with splitter support rods that mount to the chassis.
How does this kit differ from the Verus two-piece splitter for 2017-2020 cars? This kit uses a single blade of the 2017 and later design with the race upgrade kit included. The Two-Piece Front Splitter divides the blade into halves, which Verus Engineering says lowers shipping cost and lets an owner replace one damaged half without buying a whole blade. Both use hard plastic and both bolt to the 2017-2020 bumper.
Will the splitter bend under the car if it hits something? No. Verus Engineering builds the blade from a hard, stiff plastic that does not pull under the car the way aluminum splitters can, and the material resists cracking when struck from below. Support rods tie the splitter to the chassis so it holds its position at speed, which matters on a car that sees both track days and steep driveways.
What does a front splitter do on the 86 and BRZ? A front splitter reduces front-end lift, which adds traction at the front tires at high speed. Verus Engineering also lists lower drag, better overall aerodynamic efficiency and reduced lap times among its benefits. Verus sized this one with analysis software so it balances the car with the various Ventus packages for the 86 and BRZ.

About Verus Engineering

Verus Engineering designs aerodynamic and performance parts in Indianapolis, Indiana. Two engineers founded it in late 2014 as Velox Motorsports and renamed it in 2017 after a trademark dispute; verus is Latin for true or complete. Each design starts from a 3D scan of the car, is developed with CFD and finite element analysis and is validated on track, across more than 20 platforms from the GR86 to the C8 Corvette.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Verus Engineering Front Splitter Kit for ZN6 Toyota 86 and ZC6 Subaru BRZ (2017-2020) [A0124A]

Guaranteed Safe Checkout

Verus Engineering Front Splitter Kit for ZN6 Toyota 86 and ZC6 Subaru BRZ (2017-2020)

Features

What’s Included

Applications

Notes

Frequently Asked Questions

About Verus Engineering

Reviews