What is the V10 Intercooler Pair made from?

Each intercooler in the V10 Intercooler Pair combines a Garrett core, which T1 lists at 1,000 hp, with billet end tanks on both the water and air sides. T1 Race Development fabricates the pair for turbocharged second generation Audi R8 and Lamborghini Huracán builds.

What fittings do the intercoolers use?

The water tanks have -12AN ORB bungs. The air inlet tank has a 2.5 inch Vanjen receiver and the outlet tank a 3.5 inch Vanjen flange, so the charge pipes join with Vanjen connections. The T1 V10 Intercooler Pair also carries blow-off valve and pressure sensor flanges.

Which blow-off valves fit the flange?

The inlet tank has a flange for either a Tial Q or a Turbosmart blow-off valve, which places the valve on the intercooler itself. The valves are not included with this listing, though the T1 turbo kit for these cars does include Turbosmart Raceport valves.

Does it fit every Huracán?

No. T1 Race Development notes that the intercooler pair does not fit the Huracán Performante. It is built for the second generation Audi R8 and the other LB724 Huracán models, and Bulletproof Automotive can confirm fitment for a specific car before ordering.

Is a mounting shelf included?

No. This listing is the two intercoolers only. The T1 V10 intercooler shelf, with isolating mounts installed and chassis hardware, comes in the T1 complete ice box kits along with the ice box, and on the R8 the line kit and heat exchanger kit as well.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

T1 Race Development V10 Intercooler Pair for LB724 Lamborghini Huracán and 4S Audi R8

T1 Race Development’s V10 Intercooler Pair for LB724 Lamborghini Huracán and 4S Audi R8 consists of two water-to-air intercoolers that T1 fabricates for turbocharged second generation R8 and Huracán builds. Each unit is built around a Garrett core that T1 lists at 1,000 hp, between billet end tanks machined for the water, charge air, blow-off valve and boost sensor connections a turbo V10 needs.

Design and Performance

The water side uses billet end tanks with -12AN ORB bungs, so the pair plumbs straight into an AN water circuit such as T1’s ice box and line kit. On the air side, the billet inlet tank carries a 2.5 inch Vanjen receiver and a flange for a Tial Q or Turbosmart blow-off valve, which puts the valve right at the intercooler. The billet outlet tank has a 3.5 inch Vanjen flange for the charge pipe and a flange for a 4 bar pressure sensor, giving the ECU a boost reading after the cooler.

Fitment

T1 builds the pair for the second generation Audi R8 and the LB724 Huracán. T1’s complete Huracán kit notes that the pair does not fit the Huracán Performante, and the T1 V10 intercooler shelf that mounts the pair is sold as part of the complete ice box kits rather than with this listing.

Features

Two T1 water-to-air intercoolers with Garrett cores
Billet water end tanks with -12AN ORB bungs
Blow-off valve flange for Tial Q or Turbosmart valves
4 bar pressure sensor flange on the outlet tank
Any color powdercoat included in the price

Specifications

Quantity: 2 intercoolers
Core: Garrett, listed by T1 at 1,000 hp
Water ports: Billet end tanks with -12AN ORB bungs
Air inlet: Billet tank with 2.5 inch Vanjen receiver
Air outlet: Billet tank with 3.5 inch Vanjen flange
Sensor flange: 4 bar pressure sensor, on the outlet tank
Finish: Powdercoat in any color

Applications

Audi R8: 4S | 2017-2023 | 5.2L V10
Lamborghini Huracán: LB724 | 2015-2024 | 5.2L V10

Notes

Does not fit the Huracán Performante, per T1
Mounting shelf, water lines, pump and ice box are not included; the T1 Race Development V10 Complete Ice Box Kit (T1 R8 Complete Ice Box Kit) supplies them
The V10 Intercooler Pair is also part of the T1 Race Development V10 Turbo Kit (T1 Turbo Kit R8 2017-2023 or Huracan)
Powdercoat color is chosen at order

Frequently Asked Questions

What is the V10 Intercooler Pair made from? Each intercooler in the V10 Intercooler Pair combines a Garrett core, which T1 lists at 1,000 hp, with billet end tanks on both the water and air sides. T1 Race Development fabricates the pair for turbocharged second generation Audi R8 and Lamborghini Huracán builds.
What fittings do the intercoolers use? The water tanks have -12AN ORB bungs. The air inlet tank has a 2.5 inch Vanjen receiver and the outlet tank a 3.5 inch Vanjen flange, so the charge pipes join with Vanjen connections. The T1 V10 Intercooler Pair also carries blow-off valve and pressure sensor flanges.
Which blow-off valves fit the flange? The inlet tank has a flange for either a Tial Q or a Turbosmart blow-off valve, which places the valve on the intercooler itself. The valves are not included with this listing, though the T1 turbo kit for these cars does include Turbosmart Raceport valves.
Does it fit every Huracán? No. T1 Race Development notes that the intercooler pair does not fit the Huracán Performante. It is built for the second generation Audi R8 and the other LB724 Huracán models, and Bulletproof Automotive can confirm fitment for a specific car before ordering.
Is a mounting shelf included? No. This listing is the two intercoolers only. The T1 V10 intercooler shelf, with isolating mounts installed and chassis hardware, comes in the T1 complete ice box kits along with the ice box, and on the R8 the line kit and heat exchanger kit as well.

About T1 Race Development

T1 Race Development was founded in Texas in 2005 by Tony Palo, whose 2000 Acura Integra GSR became the first eight-second front-wheel-drive street car before the shop turned its attention to the Nissan GT-R. T1 went on to become the first to exceed 230 mph in the half mile in a GT-R and the first to make 2,400 whp from the VR38DETT, and it now develops engines, drivetrain parts and complete builds for the R35 GT-R, Lamborghini Huracan and Audi R8.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

T1 Race Development V10 Intercooler Pair for LB724 Lamborghini Huracán and 4S Audi R8

Guaranteed Safe Checkout

T1 Race Development V10 Intercooler Pair for LB724 Lamborghini Huracán and 4S Audi R8

Design and Performance

Fitment

Features

Specifications

Applications

Notes

Frequently Asked Questions

About T1 Race Development

Reviews