What rear brakes come in the MONO4 TA and MONO4r TA Big Brake Kit for BNR34?

Two Racing MONO4r TA calipers, the rear-only four-piston pipeless caliper Endless lists for the R34, on 332mm x 30mm three-piece E-slit rotors with RCP197 pads. Endless pairs them with the MONO4 TA front calipers included in this Big Brake Kit for BNR34.

Does the Racing MONO4r TA rear set for the BNR34 GT-R save money over separate kits?

Yes. Endless prices the set below the MONO4 TA front kit and the MONO4r TA rear kit added together, and it arrives as one order with matched brackets and lines, so the whole car is converted to TA calipers in a single job.

Does the parking brake still work on the Racing MONO4r TA rear set for the BNR34 GT-R?

The factory parking brake stays. Endless three-piece rear rotors retain it, and this kit runs 332mm x 30mm three-piece rotors at the rear, so the BNR34 GT-R keeps a working parking brake after the upgrade. Endless two-piece rear rotors are the ones that do not retain it.

Is a six-piston rear available instead?

Yes. Endless also lists the six-piston Racing MONO6r TA rear for the BNR34, on 355mm rotors, which pairs with its MONO6 TA front kits. That route is heavier and costs more; this four-piston set is the lighter TA option of the two for the R34.

How should the Racing MONO4r TA rear set for the BNR34 GT-R be bedded in?

Endless specifies raising the rotors to around 400 to 500 degrees C without hard stops, then letting them cool naturally to below 100 degrees C. Do it on a dry day, as Endless notes that bedding in the rain can keep the pads from full performance.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Endless Racing MONO4 TA / Racing MONO4r TA Front and Rear Big Brake Kit for BNR34 Nissan Skyline GT-R with 332mm Rear Rotors

Endless’s Racing MONO4 TA / Racing MONO4r TA Front and Rear Big Brake Kit for BNR34 Nissan Skyline GT-R gives the rear of the R34 the pipeless MONO4r TA, the rear-only TA caliper Endless pairs with its MONO4 TA front. The rear body is a 2,100g forged monobloc with stainless pistons and a 3D-cut surface, clamping 332mm x 30mm three-piece E-slit rotors on Tufram-coated bells with the RCP197 pad. Buying the set covers both axles in one order with matched hardware.

Features

Racing MONO4r TA forged monobloc rear caliper, 2,100g
332mm x 30mm three-piece E-slit rear rotors
RCP197 rear pad shape
Racing MONO4 TA front calipers on 355mm rotors
Pipeless construction at all four corners
Tufram-coated bells

Specifications

Front caliper: Endless Racing MONO4 TA, four-piston forged monobloc, pipeless
Front caliper weight: 2,100g (Endless USA; Endless Japan lists 2,256g)
Front rotors: 355mm x 32mm, two-piece
Rear caliper: Endless Racing MONO4r TA, four-piston forged monobloc, pipeless
Rear caliper weight: 2,100g
Rear rotors: 332mm x 30mm, three-piece
Pad shapes: RCP146 front, RCP197 rear
Minimum wheel size: 15 inch front, per Endless

What’s Included

Endless Racing MONO4 TA front calipers (2)
Endless Racing MONO4r TA rear calipers (2)
Front and rear Endless brake pad sets
Caliper mounting brackets, front and rear
Front rotors (2), 355mm x 32mm two-piece
Rear rotors (2), 332mm x 30mm three-piece
Brake lines (4)

Applications

Nissan Skyline GT-R: BNR34 | 1999-2000 (production to September 2000)

Notes

Front and rear set. Same parts as the listing that leads with the 355mm front rotors
Endless lists this kit for BNR34 cars built up to September 2000 and excludes later-production cars
The three-piece rear rotors in this Big Brake Kit for BNR34 retain the factory parking brake
Replace E-slit rotors when the E marks on the face have worn away
Endless gives 15 inch as the minimum wheel for both calipers
Made to order in Japan; bleed with DOT4 or higher fluid

Frequently Asked Questions

What rear brakes come in the MONO4 TA and MONO4r TA Big Brake Kit for BNR34? Two Racing MONO4r TA calipers, the rear-only four-piston pipeless caliper Endless lists for the R34, on 332mm x 30mm three-piece E-slit rotors with RCP197 pads. Endless pairs them with the MONO4 TA front calipers included in this Big Brake Kit for BNR34.
Does the Racing MONO4r TA rear set for the BNR34 GT-R save money over separate kits? Yes. Endless prices the set below the MONO4 TA front kit and the MONO4r TA rear kit added together, and it arrives as one order with matched brackets and lines, so the whole car is converted to TA calipers in a single job.
Does the parking brake still work on the Racing MONO4r TA rear set for the BNR34 GT-R? The factory parking brake stays. Endless three-piece rear rotors retain it, and this kit runs 332mm x 30mm three-piece rotors at the rear, so the BNR34 GT-R keeps a working parking brake after the upgrade. Endless two-piece rear rotors are the ones that do not retain it.
Is a six-piston rear available instead? Yes. Endless also lists the six-piston Racing MONO6r TA rear for the BNR34, on 355mm rotors, which pairs with its MONO6 TA front kits. That route is heavier and costs more; this four-piston set is the lighter TA option of the two for the R34.
How should the Racing MONO4r TA rear set for the BNR34 GT-R be bedded in? Endless specifies raising the rotors to around 400 to 500 degrees C without hard stops, then letting them cool naturally to below 100 degrees C. Do it on a dry day, as Endless notes that bedding in the rain can keep the pads from full performance.

About Endless

Endless was founded in 1986, when Isao Hanazato began developing brake pads out of his own racing experience, and the company builds its friction material, rotors, calipers and brake fluid in Saku City, Nagano. It has run its own team since 1991, in the All Japan F3 Championship and the Mirage Cup, and by 2017 had supplied brake fluid to Formula 1 for fifteen consecutive years. The pads supplied in each kit are Endless compounds, so caliper and friction material come from the same company.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Endless Racing MONO4 TA / Racing MONO4r TA Front and Rear Big Brake Kit for BNR34 Nissan Skyline GT-R with 332mm Rear Rotors [1602937-332]

Guaranteed Safe Checkout

Endless Racing MONO4 TA / Racing MONO4r TA Front and Rear Big Brake Kit for BNR34 Nissan Skyline GT-R with 332mm Rear Rotors

Features

Specifications

What’s Included

Applications

Notes

Frequently Asked Questions

About Endless

Reviews