Why do Ferrari 458 radiators fail?

The factory unit uses an aluminum core crimped onto plastic end tanks over a gasket. Heat cycling degrades the plastic, and every hose removal during a coolant service stresses the necks and the crimp seal. After ten to fifteen years the bond starts to let go and coolant escapes. The CSF Radiator for F142 Ferrari 458 is TIG-welded aluminum throughout, so it has no plastic to break down.

Do I need to replace both 458 radiators at the same time?

Not strictly, but most shops do. Both radiators are the same age and have seen the same heat cycles, and the front end has to come apart either way, so the labor is already spent. CSF sells the right side as 7252 and the left side as 7251, individually, which lets you do one now and the other later if you prefer.

What is CSF B-Tube technology?

B-Tube is the cooling tube profile CSF developed in place of the conventional oval welded tube. The seam-brazed B section creates two laminar flow paths inside a single tube, adding internal surface area without adding core thickness. CSF measures roughly 15 percent more heat transfer from the tube alone, and up to 25 percent once the 5mm multi-louvered fin is counted.

Is the CSF Radiator for F142 Ferrari 458 a direct fit?

Yes. It drops into the OE location and uses the factory shrouds, ducting, brackets and hardware, with CNC-machined mounts and OE-style double-barbed inlet and outlet connections. No modification is required. Removing the front bumper and ducting is the bulk of the work, so CSF recommends a qualified installation facility if that is outside your comfort zone.

Does the CSF radiator have a drain plug?

Yes. CSF added a 1/4 NPT threaded drain plug to the lower tank, which the factory radiator does not have. A coolant change becomes a drain and fill instead of a hose removal, which keeps the hoses and fittings from being flexed and worn at every service interval.

What warranty does CSF provide?

CSF covers this radiator with a 2-year limited warranty against defects under normal use and service, to the original purchaser of the vehicle it was installed in. Every unit is individually leak and pressure tested before it ships, and warranty claims require the original product to be returned to CSF for inspection.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

CSF Right-Hand High-Performance Aluminum Radiator for F142 Ferrari 458

CSF’s Right-Hand High-Performance Radiator for F142 Ferrari 458 replaces the side that carries the power steering cooler, and it does so with a part built to a standard Ferrari never applied here. The original crimps an aluminum core onto plastic end tanks; ten to fifteen years of heat cycles and half a dozen coolant services later, the plastic necks are flaking onto the hoses and the crimp seal is living on borrowed time. CSF worked with Hollywood Mechanic, the Los Angeles shop that lives inside these engines, and produced a fully TIG-welded aluminum radiator: a 2-row 42mm core 26% larger than the factory unit, B-Tube cooling tubes and a 5mm multi-louvered fin, together worth up to 25% more heat transfer. It adds the 1/4 NPT drain plug Ferrari left out, bolts to CNC-machined brackets in the OE location, and finishes in satin black so nothing reads as aftermarket once the bumper is back on.

Design and Engineering

CSF set four targets before drawing anything: OEM fit and finish, more cooling capacity, better reliability, and easier servicing. The 2-row 42mm core carries 69 cooling tubes against the factory 68, and 70 fin rows against 69, and the extra thickness raises coolant volume as well as surface area. B-Tube technology is where most of the gain comes from; the seam-brazed B-section tube splits flow into two laminar paths inside the same footprint and moves roughly 15% more heat than a conventional oval welded tube. Paired with the 5mm multi-louvered fin CSF introduced at the end of 2023, total heat transfer climbs by up to 25% over the original, which is why this Radiator for F142 Ferrari 458 is worth fitting to a car that is not yet overheating.

Construction

The factory radiator is an aluminum core crimped onto plastic end tanks over a gasket. It works when new; it does not age well. Ferrari calls for a cooling system fouling inspection every year and a coolant flush every four, and each time the hoses come off, the plastic inlet and outlet necks flake and the crimp seal loses a little more of its grip. Debris from the deteriorating plastic then circulates through the system, which is how water pumps on these cars end up leaking. The CSF Radiator for F142 Ferrari 458 is 100% aluminum, TIG-welded at every tank and fitting, so nothing in it degrades on a calendar.

Serviceability

The original 458 radiators have no drain plug, so a coolant change means pulling hoses. Every CSF Radiator for F142 Ferrari 458 carries a 1/4 NPT threaded plug to the lower tank on both the left and right radiators. Across the five to eight coolant services a fifteen-year-old 458 has already been through, that is a great deal of hose flexing avoided, and it is the difference between a service that stresses the cooling system and one that leaves it alone.

Features

Exclusive B-Tube cooling tubes split coolant into two laminar paths for more heat transfer in the same space
Multi-louvered fin design pulls heat out of the core without choking airflow through it
CNC-machined mounting brackets and OE-style double-barbed inlet and outlet connections
Threaded drain plug in the lower tank, so a coolant service is a drain and fill rather than a hose pull
100% all-aluminum TIG-welded tanks and fittings in place of the factory crimped plastic
Satin black finish that reads as original once the bumper is back on
Drop-in fit in the OE location using the factory shrouds, ducting and mounting hardware, with no modification
Every Radiator for F142 Ferrari 458 is individually leak and pressure tested before it leaves CSF

Specifications

Core Rows: 2-Row (factory: 1-Row)
Core Thickness: 42mm (factory: 34mm)
Cooling Tubes: 69 (factory: 68)
Cooling Fin Rows: 70 (factory: 69)
Fin Height: 5mm, multi-louvered
Core Volume: 26% larger than the factory core
Heat Transfer: up to 25% greater than the factory radiator
Tank Material: Aluminum (factory: plastic)
Construction: 100% TIG-welded
Drain Plug: 1/4 NPT threaded, lower tank
Finish: Satin black
Warranty: 2-year limited

Applications

Ferrari 458 Italia: F142 | 2010-2015 | 4.5L V8
Ferrari 458 Speciale: F142 | 2015 | 4.5L V8
Ferrari 458 Spider: F142 | 2012-2015 | 4.5L V8

Notes

Sold individually. This is the right-side radiator; the 458 runs one on each side, and the left side is covered by the CSF Left-Hand High-Performance Aluminum Radiator for F142 Ferrari 458 (7251)
Replaces Ferrari OE part number 270265
The power steering cooler mounts on the right-hand side and bolts back to the CSF radiator in the factory position
Most owners replace the A/C condenser at the same time, because it sits in the same front-end teardown; the CSF OEM+ Performance A/C Condenser (8377) is a drop-in replacement.
Ferrari calls for a cooling system fouling inspection annually and a coolant flush every four years; the drain plug on the Radiator for F142 Ferrari 458 exists to make both of those easier on the hoses
CSF recommends a qualified installation facility if removing the front bumper and ducting is outside your comfort zone
Browse the wider CSF cooling range on Bulletproof Automotive

Frequently Asked Questions

Why do Ferrari 458 radiators fail? The factory unit uses an aluminum core crimped onto plastic end tanks over a gasket. Heat cycling degrades the plastic, and every hose removal during a coolant service stresses the necks and the crimp seal. After ten to fifteen years the bond starts to let go and coolant escapes. The CSF Radiator for F142 Ferrari 458 is TIG-welded aluminum throughout, so it has no plastic to break down.
Do I need to replace both 458 radiators at the same time? Not strictly, but most shops do. Both radiators are the same age and have seen the same heat cycles, and the front end has to come apart either way, so the labor is already spent. CSF sells the right side as 7252 and the left side as 7251, individually, which lets you do one now and the other later if you prefer.
What is CSF B-Tube technology? B-Tube is the cooling tube profile CSF developed in place of the conventional oval welded tube. The seam-brazed B section creates two laminar flow paths inside a single tube, adding internal surface area without adding core thickness. CSF measures roughly 15 percent more heat transfer from the tube alone, and up to 25 percent once the 5mm multi-louvered fin is counted.
Is the CSF Radiator for F142 Ferrari 458 a direct fit? Yes. It drops into the OE location and uses the factory shrouds, ducting, brackets and hardware, with CNC-machined mounts and OE-style double-barbed inlet and outlet connections. No modification is required. Removing the front bumper and ducting is the bulk of the work, so CSF recommends a qualified installation facility if that is outside your comfort zone.
Does the CSF radiator have a drain plug? Yes. CSF added a 1/4 NPT threaded drain plug to the lower tank, which the factory radiator does not have. A coolant change becomes a drain and fill instead of a hose removal, which keeps the hoses and fittings from being flexed and worn at every service interval.
What warranty does CSF provide? CSF covers this radiator with a 2-year limited warranty against defects under normal use and service, to the original purchaser of the vehicle it was installed in. Every unit is individually leak and pressure tested before it ships, and warranty claims require the original product to be returned to CSF for inspection.

About CSF

The Racing & High Performance Division of CSF Inc. is dedicated to designing and producing the world’s most advanced, efficient, and dependable cooling solutions. CSF offers a broad range of state-of-the-art cooling systems, with over 250 distinct applications. These include high-performance all-aluminum direct-fit radiators, intercoolers, and oil coolers, as well as bespoke manufacturing tailored for racecars, power sports, off-road vehicles, marine, and industrial applications. Every cooling solution from CSF is meticulously crafted to ensure optimal engine temperature management, even in the most rigorous driving scenarios. With a legacy spanning over 50 years and more than 40 million cooling units distributed worldwide, CSF is widely regarded as a luminary in the industry.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

CSF Right-Hand High-Performance Aluminum Radiator for F142 Ferrari 458 [7252]

Guaranteed Safe Checkout

CSF Right-Hand High-Performance Aluminum Radiator for F142 Ferrari 458

Design and Engineering

Construction

Serviceability

Features

Specifications

Applications

Notes

Frequently Asked Questions

About CSF

Reviews