Is this price for one wheel or a set?

A complete staggered set of four: two 21 x 9.5 fronts and two 22 x 12 rears.

Which PCD should I choose?

Select Porsche Centerlock if your car is centerlock-equipped. The 5-130 option is for standard bolt-on cars and is finished to look like a centerlock wheel.

Will the Moshammer Forged M906GT clear my PCCB brakes?

Yes. The Moshammer Forged M906GT is designed to clear both OEM steel and PCCB systems.

Can I order a different size or finish?

Yes. Every set is forged to order in any size, width, and finish. Contact us and we will quote the configuration you want.

Do my factory TPMS sensors carry over?

Yes, OEM Porsche TPMS sensors are supported.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Moshammer Forged M906GT Wheel Set for 992 Porsche 911 Carrera S, 4S & GTS

Moshammer Forged M906GT carries a particular kind of confidence: the kind found in a wheel that does not announce itself. It begins from the shape a 992 owner already recognizes, then corrects everything Weissach left on the table. Spoke openings recut with sharp, deliberate edges, offsets fixed rather than inherited, and the OEM convex face replaced by an extreme concave profile that turns a familiar silhouette into something closer to sculpture. Forged as a monoblock in Berlin, offered in genuine Porsche centerlock or a 5-130 fitment that keeps the centerlock look, and made to order in any size, width, and finish you specify.

Design

At a glance the Moshammer Forged M906GT could pass for an original Porsche wheel, and that is entirely the point. Moshammer reshaped the wheel center and spoke openings with precise, machined edges for a more dynamic read, then replaced the OEM convex face with deep concavity, the single change that gives the 992 Carrera a stance you will not find on another car in the paddock.

Engineering and Fitment

The Moshammer Forged M906GT corrects the non-optimal factory offsets and steps the sizes up to 21 x 9.5 front and 22 x 12 rear, filling the arches flush and completing the visual line between wheel, tire, and bodywork. The wheel clears both OEM steel brakes and PCCB, supports factory TPMS sensors, and is offered in true Porsche centerlock as well as a 5-130 bolt fitment finished to look like centerlock.

Construction and Finish

Each Moshammer Forged M906GT set is forged as a monoblock and produced to order rather than pulled from stock, which is what makes the customization real: the listed configuration is gloss black with a machined face, but sizes, widths, offsets, and finishes are all specified at build time. Tell us what you want and Moshammer forges to it.

Features

Compatible with OEM steel brakes and PCCB
Corrected offsets over the factory wheel
Custom sizes, widths, offsets, and finishes available to order
Extreme concave face replacing the OEM convex profile
Includes center caps
Listed finish: gloss black with machined front
Machined spoke openings with sharp, precise edges
Monoblock forged construction
OEM TPMS sensors supported
Offered in Porsche centerlock or 5-130 with centerlock look
Sizes as listed: 21 x 9.5 front, 22 x 12 rear
Sold as a complete staggered set of four wheels (x4)

Applications

Porsche 911 Carrera S: 992.1, 992.2 | 2020-present
Porsche 911 Carrera 4S: 992.1, 992.2 | 2020-present
Porsche 911 Carrera GTS: 992.1, 992.2 | 2022-present

Notes

Moshammer parts ship directly from Germany. Import taxes, duties, and tariffs may apply upon delivery and are the responsibility of the buyer. These fees are neither collected nor paid by Bulletproof Automotive.
Moshammer products are not eligible for return
The Moshammer Forged M906GT is priced and sold as a complete staggered set of four wheels
Tires, TPMS sensors, and center-lock hardware are not included
Made to order in Berlin; current production time is 6 to 8 weeks before shipment
Custom sizes, widths, offsets, and finishes are available, contact us for a quote before ordering

Frequently Asked Questions

Is this price for one wheel or a set? A complete staggered set of four: two 21 x 9.5 fronts and two 22 x 12 rears.
Which PCD should I choose? Select Porsche Centerlock if your car is centerlock-equipped. The 5-130 option is for standard bolt-on cars and is finished to look like a centerlock wheel.
Will the Moshammer Forged M906GT clear my PCCB brakes? Yes. The Moshammer Forged M906GT is designed to clear both OEM steel and PCCB systems.
Can I order a different size or finish? Yes. Every set is forged to order in any size, width, and finish. Contact us and we will quote the configuration you want.
Do my factory TPMS sensors carry over? Yes, OEM Porsche TPMS sensors are supported.

About Moshammer

Moshammer Automotive is a Berlin-based manufacturer of OEM+ aerodynamic refinement for Porsche, with a smaller line for Mini, Audi, BMW, and Mercedes-Benz. The house style is restraint with intent: parts drawn to look as though the factory had gone one step further, developed against original mounting points, TUV-documented where German road use demands it, and produced in small batches rather than stocked in volume. Their catalog spans single accents such as vent grills and wing end blades through complete Downforce and Tradition RS aero programs, alongside a range of multipiece forged wheels made to order in any size, width, and finish.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Moshammer Forged M906GT Wheel Set for 992 Porsche 911 Carrera S, 4S & GTS [992.20.95022.M/992.20.95024.M]

Guaranteed Safe Checkout

Moshammer Forged M906GT Wheel Set for 992 Porsche 911 Carrera S, 4S & GTS

Design

Engineering and Fitment

Construction and Finish

Features

Applications

Notes

Frequently Asked Questions

About Moshammer

Reviews