How much power does the VF ECU Software for 991.2 GT3 add?

VF Engineering quotes 515 hp and 365 lb-ft from its ECU Software for 991.2 Porsche 911 GT3 models, gains of 22 hp and 26 lb-ft over the factory 493 hp and 339 lb-ft. The GT3 RS starts from a higher factory rating, so its gain differs.

Does the software fit the 991.2 GT3 RS?

Yes. VF Engineering lists one calibration for the 991.2 GT3 and GT3 RS, which share the 4.0 liter flat six in different states of tune. The figures quoted on this listing apply to the GT3 rather than the RS, which is rated higher from the factory.

How is the software installed?

VF supplies the calibration as an end-user programmable package written through the OBDII port, so a workshop visit is not required. VF Engineering states that the factory calibration can be restored from the same port at any time, with nothing physical changed on the car.

Does it work with the six-speed manual?

The calibration works on the engine and VF Engineering lists it for the 991.2 GT3 without restriction by gearbox. The six-speed manual or seven-speed PDK keeps its factory behavior while the flat six responds more sharply to the throttle at every speed.

Should the software be paired with an exhaust?

It runs on the factory exhaust. VF Engineering also builds a titanium valved catback exhaust for the 991.2 GT3 and GT3 RS, and owners combining the two can ask Bulletproof Automotive to confirm the right pairing with VF before ordering.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

VF Engineering Performance ECU Software for 991.2 Porsche 911 GT3 and GT3 RS

VF Engineering’s Performance ECU Software for 991.2 Porsche 911 GT3 and GT3 RS is written for the generation that brought the 4.0-liter naturally aspirated flat-six to the regular GT3 and returned the six-speed manual as an option. VF quotes 515 hp and 365 lb-ft for the GT3 with the calibration installed, gains of 22 hp and 26 lb-ft over the factory 493 hp and 339 lb-ft. A 9,000 rpm engine rewards precise mapping more than brute force, and the calibration concentrates on throttle response and the eagerness of the climb to the limiter. It suits a 991.2 GT3 or GT3 RS owner who wants the engine honed and the car otherwise as delivered.

Features

VF-quoted 515 hp and 365 lb-ft for the GT3
Gain of 22 hp and 26 lb-ft over the factory GT3
Revised ignition, fueling and throttle mapping
End-user programmable through the OBDII port
Factory calibration can be restored at any time
No change to factory hardware

Applications

Porsche 911 GT3: 991.2 | 2017-2019 | 4.0L flat-6
Porsche 911 GT3 RS: 991.2 | 2018-2019 | 4.0L flat-6

Notes

This ECU Software for 991.2 Porsche 911 GT3 and GT3 RS models is software only
The gains are measured against the factory 493 hp GT3; the GT3 RS starts from a higher rating
For a full exhaust to match, see the VF Engineering Titanium Valved Catback Exhaust for 991.2 Porsche 911 GT3 and GT3 RS

Frequently Asked Questions

How much power does the VF ECU Software for 991.2 GT3 add? VF Engineering quotes 515 hp and 365 lb-ft from its ECU Software for 991.2 Porsche 911 GT3 models, gains of 22 hp and 26 lb-ft over the factory 493 hp and 339 lb-ft. The GT3 RS starts from a higher factory rating, so its gain differs.
Does the software fit the 991.2 GT3 RS? Yes. VF Engineering lists one calibration for the 991.2 GT3 and GT3 RS, which share the 4.0 liter flat six in different states of tune. The figures quoted on this listing apply to the GT3 rather than the RS, which is rated higher from the factory.
How is the software installed? VF supplies the calibration as an end-user programmable package written through the OBDII port, so a workshop visit is not required. VF Engineering states that the factory calibration can be restored from the same port at any time, with nothing physical changed on the car.
Does it work with the six-speed manual? The calibration works on the engine and VF Engineering lists it for the 991.2 GT3 without restriction by gearbox. The six-speed manual or seven-speed PDK keeps its factory behavior while the flat six responds more sharply to the throttle at every speed.
Should the software be paired with an exhaust? It runs on the factory exhaust. VF Engineering also builds a titanium valved catback exhaust for the 991.2 GT3 and GT3 RS, and owners combining the two can ask Bulletproof Automotive to confirm the right pairing with VF before ordering.

About VF Engineering

VF Engineering designs supercharger and turbocharger systems, titanium exhausts and ECU and TCU calibrations from a 15,000 sq ft facility in Anaheim, Orange County, California, where it has been based for nearly two decades. Every calibration is developed in house on the company’s own Mustang AWD 500 chassis dyno, ECU boards are handled in a dedicated clean room, and new parts start in an R&D room equipped with a rapid prototyper. VF reports that more than 93 percent of its supercharger systems are still running after years of hard use, many on their second or third owner, and its engineers carry the testing discipline of the Lamborghini Super Trofeo series into every road calibration.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.