Is the DSC Sport V1 Controller included, and is it required?

The DSC Sport V1 Controller is not included but is required for the system to operate. It replaces the factory shock controller and interfaces directly with the factory dash display and controls, processing brake pressure, g-force, acceleration, steering inputs, and vehicle speed simultaneously to determine the correct damping level at any given moment. Without it, the elec-TRON shocks cannot function as intended.

What is the difference between the coilover and divorced rear suspension configurations?

The coilover configuration combines the spring and damper into a single unit, keeping things compact and workable for road and general track use. The divorced configuration separates the two, allowing independent positioning and tuning; the preferred route for dedicated race builds where geometry optimization and setup flexibility take priority over installation simplicity.

What is the difference between the OEM wheel size and 11-inch wheel size variants?

The two variants use different foot brackets sized to suit different wheel fitments. The OEM variant is built around standard factory wheel dimensions, while the 11-inch variant accommodates wider wheel setups. Choosing the correct variant depends on the wheel width you are running or plan to run.

Can I run custom spring rates?

Yes. Recommended rates are available for both Fast Road Spec and Track Day Spec configurations, but custom spring rates are available on request.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Nitron elec-TRON R1 Coilover Kit for S550 Ford Mustang EcoBoost & GT

The S550 Mustang EcoBoost and GT respond well to a properly developed suspension setup, and the Nitron elec-TRON R1 delivers electronic damping control through Nitron’s proportional solenoid valve, managed by the Nitron elec-TRON DSC Sport V1 Controller. The DSC Sport V1 is required for the system to operate; it processes brake pressure, g-force, acceleration, steering inputs, and vehicle speed simultaneously, adjusting damping every 5 milliseconds without any manual input from the driver. Coilover and divorced rear suspension configurations are both available to suit different build requirements, droplinks are included so the installation is complete without sourcing additional hardware, and foot brackets are available for both OEM and 11-inch wheel fitments. The hardware traces directly back to the R3 platform, so what you’re getting is proven race-derived componentry packaged into a more accessible, straightforward setup. Every kit is custom built, custom sprung, and fully serviceable.

elec-TRON

Nitron’s elec-TRON system starts with a proprietary proportional solenoid valve fitted to each individual shock, giving the DSC Sport V1 precise, independent damping control at every corner. The system monitors g-load, vehicle speed, road conditions, and driver inputs simultaneously, making damping adjustments every 5 milliseconds. For reference, a human eye blink takes somewhere between 100 and 150 milliseconds. That processing speed means the suspension is reacting to what the road and the driver are doing in real time, not catching up after the fact.

Standalone Electronic Damping System

The Nitron DSC Sport V1 Controller is a required component for the elec-TRON R1 on the S550 Mustang EcoBoost and GT, sold separately. It processes brake pressure, g-force, acceleration, steering inputs, and vehicle speed simultaneously, using full individual shock calibration tables to determine the correct damping level at any given moment. The result is a fully user-definable suspension platform that can be tuned with the same precision you’d apply to an engine; dialing in more mechanical grip for the track or softening the setup for daily road use.
- Replaces factory shock controller
- Interfaces with factory dash display and controls
- Calculations include brake pressure, g-force, acceleration, steering, speed and full individual shock calibration tables

Unique Technology

Nitron builds every shock around precision components that go through a thorough design and development process long before final assembly. The modular construction gives engineers the room to develop each application properly on its own terms, without cutting corners on part quality or how components work together under load. Everything is machined to tight tolerances and inspected individually by trained technicians; quality control isn’t a final step here, it runs through the entire process. New materials, finishes, and processes are validated extensively before they’re brought into production, with proprietary Nitron technologies woven throughout to produce shocks that hold up against the competition on both road and track. That level of engineering discipline is what the brand has been built on.
- Basic Damper Design:
  1. End Eye / Top Mount
  2. Damper Piston & Shim Stack
  3. Shaft / Rod
  4. Floating / Separator Piston
  5. Suspension Oil
  6. Compressed Nitrogen Gas

Bespoke Engineering

Nitron doesn’t start with a generic damper and work backward from there. Every application is developed from the ground up, with components, spring rates, and damping characteristics determined by the specific platform rather than borrowed from something adjacent. The geometry, weight distribution, and suspension travel of the S550 Mustang EcoBoost and GT shape the design from the start, not as corrections added later. That’s what separates a kit engineered for these cars from one that was simply made to fit them.

Features

Coilover or divorced rear suspension types
Shares core technology with the R3 kit
No manual damping adjustments are required, fully controlled by the solenoid valve
Internal reservoir type
Full alloy body
Preload adjuster
Nitrogen gas charged
Precision bearing spacers supplied as required
Consists of 4 coilovers, adjustable top mounts, and droplinks
Hand made to order
Foot brackets for OEM and 11-inch wheel sizes

Specifications

Coilover Type: elec-TRON R1
Rear Suspension Type:
- Coilover
- Divorced
Droplinks Included: Yes
Recommended Spring Rates:
- FRS – Fast Road Spec:
  - Front: 628lbs/inch (110N/mm)
  - Rear:
    - Coilover: Data not available
    - Divorced: 900lbs/inch (158N/mm)
- TDS – Track Day Spec:
  - Front: 799lbs/inch (140N/mm)
  - Rear:
    - Coilover: Data not available
    - Divorced: 1000lbs/inch (175N/mm)

Applications

Ford Mustang EcoBoost: S550 | 2015-2023
Ford Mustang GT: S550 | 2015-2023

Other Suspension Kits for S550 EcoBoost / GT

Notes

This kit requires the Nitron elec-TRON DSC Sport V1 Controller to work; it can be purchased separately if desired
Custom spring rates also available, please contact us directly here for more information or for a consultation on custom rates
Images used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.
Precision bearing spacers supplied as required

Frequently Asked Questions

Is the DSC Sport V1 Controller included, and is it required? The DSC Sport V1 Controller is not included but is required for the system to operate. It replaces the factory shock controller and interfaces directly with the factory dash display and controls, processing brake pressure, g-force, acceleration, steering inputs, and vehicle speed simultaneously to determine the correct damping level at any given moment. Without it, the elec-TRON shocks cannot function as intended.
What is the difference between the coilover and divorced rear suspension configurations? The coilover configuration combines the spring and damper into a single unit, keeping things compact and workable for road and general track use. The divorced configuration separates the two, allowing independent positioning and tuning; the preferred route for dedicated race builds where geometry optimization and setup flexibility take priority over installation simplicity.
What is the difference between the OEM wheel size and 11-inch wheel size variants? The two variants use different foot brackets sized to suit different wheel fitments. The OEM variant is built around standard factory wheel dimensions, while the 11-inch variant accommodates wider wheel setups. Choosing the correct variant depends on the wheel width you are running or plan to run.
Can I run custom spring rates? Yes. Recommended rates are available for both Fast Road Spec and Track Day Spec configurations, but custom spring rates are available on request.

About Nitron Suspension

Nitron Suspension has been at the forefront of precision suspension engineering since 1998, founded by Guy Evans with the goal of building high-performance shocks for enthusiasts and professionals alike. Over 200 dealers now carry Nitron products across Europe, Asia, the US, Australasia, and Africa. In 2008, the company moved into a dedicated facility in the UK’s Motorsport Valley, adding dynamometers, 5-axis CNC machines, and 3D CAD capabilities to support both growing demand and continued product development. A second expansion came in 2023 with a new office in Murrieta, California. The team behind every Nitron product draws from deep backgrounds in machining, materials technology, hydraulics, bike engineering, and F1 racing, with many engineers bringing firsthand experience as competitive drivers and riders. That depth of knowledge across both the technical and competitive sides of motorsport shapes every product Nitron develops.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Nitron elec-TRON R1 Coilover Kit for S550 Ford Mustang EcoBoost & GT [NTCFO019ER1/NTCFO020ER1]

Guaranteed Safe Checkout

Nitron elec-TRON R1 Coilover Kit for S550 Ford Mustang EcoBoost & GT

elec-TRON

Standalone Electronic Damping System

Unique Technology

Bespoke Engineering

Features

Specifications

Applications

Other Suspension Kits for S550 EcoBoost / GT

Notes

Frequently Asked Questions

About Nitron Suspension

Reviews