How much power does the Competition Package for 991.2 Carrera S add?

VF Engineering quotes 480 hp and 485 lb-ft from its Competition Package for 991.2 Porsche 911 Carrera S and Carrera 4S models, gains of 66 hp and 116 lb-ft over the factory 414 hp and 369 lb-ft, with boost, ignition and fueling revised on the factory turbochargers.

Is the Competition Package worth it over the Performance software?

VF rates its Performance ECU Software for these cars at 465 hp and 460 lb-ft, at $1,695. The Competition Package costs $200 more at $1,895 and adds 15 hp and 25 lb-ft on the figures VF publishes. VF Engineering describes the Competition file as a track calibration.

Does it fit the Targa 4S and Cabriolet?

VF Engineering lists the calibration for the 991.2 Carrera S and Carrera 4S, and the Targa 4S and Cabriolet versions share the same 3.0 liter engine. Give Bulletproof Automotive the exact model when ordering so VF can confirm the file before it is supplied.

How is the calibration loaded?

VF Engineering supplies the Competition Package as end user programmable software, loaded by the owner through the OBDII port with no professional installation needed. The factory calibration can be restored at any time, for a sale or a visit to a Porsche dealer.

Will the Carrera S file work on a GTS?

No. The 991.2 Carrera GTS uses larger turbochargers than the Carrera S and 4S, and VF Engineering writes a separate calibration for it. GTS owners should choose the Competition Package for the GTS, sold as its own listing at Bulletproof Automotive.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

VF Engineering Competition Package for 991.2 Porsche 911 Carrera S and Carrera 4S

VF Engineering’s Competition Package for 991.2 Porsche 911 Carrera S and Carrera 4S is VF’s strongest file for the 3.0-liter twin-turbocharged flat-six that turned the regular Carrera range turbocharged in 2017. Porsche rated the S and 4S at 414 hp and 369 lb-ft; VF quotes 480 hp and 485 lb-ft with the Competition calibration, gains of 66 hp and 116 lb-ft. That torque figure is the story, a full 25 lb-ft beyond VF’s own Performance software and well past the factory 991.2 GTS, available from low in the rev range. VF writes the file for track use. For an S or 4S owner who wants the car to outpace the GTS on circuit days without fitting anything, it is the most VF offers short of new turbochargers.

Features

VF-quoted 480 hp and 485 lb-ft
Gain of 66 hp and 116 lb-ft over the factory rating
25 lb-ft more torque than the VF Performance calibration
One calibration for the Carrera S and Carrera 4S
End-user programmable through the OBDII port
Factory calibration can be restored at any time

Applications

Porsche 911 Carrera S: 991.2 | 2017-2019 | 3.0L twin-turbo flat-6
Porsche 911 Carrera 4S: 991.2 | 2017-2019 | 3.0L twin-turbo flat-6

Notes

This Competition Package for 991.2 Porsche 911 Carrera S and Carrera 4S models is software only, with no hardware supplied
VF Engineering designs the Competition calibration for track use
For a milder VF calibration, see the VF Engineering Performance ECU Software for 991.2 Porsche 911 Carrera S and Carrera 4S
For a full turbo upgrade, see the VF Engineering VF700 Twin Turbocharger System for 991.2 Porsche 911 Carrera S / 4S

Frequently Asked Questions

How much power does the Competition Package for 991.2 Carrera S add? VF Engineering quotes 480 hp and 485 lb-ft from its Competition Package for 991.2 Porsche 911 Carrera S and Carrera 4S models, gains of 66 hp and 116 lb-ft over the factory 414 hp and 369 lb-ft, with boost, ignition and fueling revised on the factory turbochargers.
Is the Competition Package worth it over the Performance software? VF rates its Performance ECU Software for these cars at 465 hp and 460 lb-ft, at $1,695. The Competition Package costs $200 more at $1,895 and adds 15 hp and 25 lb-ft on the figures VF publishes. VF Engineering describes the Competition file as a track calibration.
Does it fit the Targa 4S and Cabriolet? VF Engineering lists the calibration for the 991.2 Carrera S and Carrera 4S, and the Targa 4S and Cabriolet versions share the same 3.0 liter engine. Give Bulletproof Automotive the exact model when ordering so VF can confirm the file before it is supplied.
How is the calibration loaded? VF Engineering supplies the Competition Package as end user programmable software, loaded by the owner through the OBDII port with no professional installation needed. The factory calibration can be restored at any time, for a sale or a visit to a Porsche dealer.
Will the Carrera S file work on a GTS? No. The 991.2 Carrera GTS uses larger turbochargers than the Carrera S and 4S, and VF Engineering writes a separate calibration for it. GTS owners should choose the Competition Package for the GTS, sold as its own listing at Bulletproof Automotive.

About VF Engineering

VF Engineering designs supercharger and turbocharger systems, titanium exhausts and ECU and TCU calibrations from a 15,000 sq ft facility in Anaheim, Orange County, California, where it has been based for nearly two decades. Every calibration is developed in house on the company’s own Mustang AWD 500 chassis dyno, ECU boards are handled in a dedicated clean room, and new parts start in an R&D room equipped with a rapid prototyper. VF reports that more than 93 percent of its supercharger systems are still running after years of hard use, many on their second or third owner, and its engineers carry the testing discipline of the Lamborghini Super Trofeo series into every road calibration.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.