Does the Eventuri 8Y RS3 intake fit my car?

Yes, if you have a 2020 or newer Audi 8Y RS3 with the 2.5T 5-cylinder engine. The system is a direct replacement for the factory airbox and uses an OPF (DWNA) breather adapter, so confirm your car is the 8Y generation before ordering rather than the earlier 8V RS3.

How much power does it add and how much air does it flow?

Eventuri measures 840 CFM against the factory intake's 530 CFM. On a stock-turbo 8Y RS3 that translates to roughly 15-20 hp and 13-18 ft-lb, with sharper throttle response. The intake has enough capacity to support built engines running well beyond 1000 whp.

Do I need a tune to run this intake?

No. The Eventuri Audi 8Y RS3 intake installs as a sealed bolt-on with OEM-level fitment and does not require a tune. A supporting calibration is only relevant for heavily modified, high-horsepower builds that need to make full use of the extra airflow capacity the system provides.

What is the filter and how often is it serviced?

The system uses one bespoke dry cone filter, replacement part number EVE-W210-FTR in the Type D specification, with over 130,000 mm² of filtration surface area. It is a serviceable filter, so clean or replace it at regular intervals to keep the 840 CFM airflow figure consistent over time.

How does it keep intake temperatures down?

The filter sits inside a fully sealed carbon housing fed by a duct sealed to the front slam panel, plus a secondary hood feed equivalent to an added 7-inch inlet. A gold reflective heat shield cuts radiant heat transfer, so the turbo draws dense, cooler air even during aggressive driving.

What is the intake made of?

It is built from 100% prepreg carbon fiber with no fiberglass, including the patented Venturi filter housing and the 103mm internal diameter intake tube. The smooth internal carbon surface promotes laminar flow into the turbo inlet, and every component is engineered for OEM-level fitment and durability.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Eventuri Black Carbon Intake System for 8Y Audi RS3

The Eventuri 8Y RS3 intake, sold as the Eventuri Audi 8Y RS3 Black Carbon Intake System, is a fully sealed carbon replacement for the factory airbox on Audi’s latest 5-cylinder turbocharged platform, engineered to unlock airflow while holding intake air temperatures low. Developed through flow bench testing, temperature data logging, and real-world validation, it flows 840 CFM against the factory intake’s 530 CFM and supports builds from stock power all the way past 1000 whp on the 8Y RS3. On stock-turbo cars it delivers roughly 15-20 hp and 13-18 ft-lb, along with sharper throttle response and improved turbo efficiency.

Features

Fully sealed carbon airbox architecture keeps induction air isolated from engine bay heat
Patented carbon Venturi filter housing with a smooth internal surface that promotes laminar airflow into the turbo inlet
Sealed inlet duct draws ambient air from the front slam panel, with an elevated secondary hood feed for extra cold air supply
Gold reflective heat shield cuts radiant heat transfer so the turbo receives denser, cooler air under sustained load
Airflow capacity scales from stock power to builds beyond 1000 whp
Precision engineered for OEM-level fitment and durability
Designed and hand-assembled in the UK

Specifications

Construction: 100% prepreg carbon fiber, no fiberglass components
Filter housing: Patented carbon Venturi housing with 103mm outlet
Intake tube: Carbon fiber with smooth curvature, 103mm internal diameter
Flow bench data: 840 CFM versus 530 CFM for the factory intake
Performance gain (stock turbo): Approximately 15-20 hp and 13-18 ft-lb
Inlet duct: Sealed carbon, with a secondary hood feed equivalent to an added 7-inch inlet
Heat shield: Gold reflective, to reduce radiant heat soak
Breather adapter: OPF (DWNA)
Mounting brackets: Laser-cut stainless steel
Couplers: OEM-spec silicone couplers, reducer, and breather hose

Applications

Audi RS3: 8Y | 2020-present | 2.5T 5-cylinder

Notes

Fits the OPF (DWNA) equipped 8Y RS3; the included breather adapter is configured for that engine. Confirm your car with Bulletproof Automotive if unsure.
The Eventuri 8Y RS3 intake uses one replacement filter, part number EVE-W210-FTR (Type D); keep one on hand as a service consumable.
Check your local emissions regulations before purchase; the manufacturer’s emissions compliance notice applies.
Warranty coverage and damage-in-transit support are provided by the manufacturer.

Frequently Asked Questions

Does the Eventuri 8Y RS3 intake fit my car? Yes, if you have a 2020 or newer Audi 8Y RS3 with the 2.5T 5-cylinder engine. The system is a direct replacement for the factory airbox and uses an OPF (DWNA) breather adapter, so confirm your car is the 8Y generation before ordering rather than the earlier 8V RS3.
How much power does it add and how much air does it flow? Eventuri measures 840 CFM against the factory intake’s 530 CFM. On a stock-turbo 8Y RS3 that translates to roughly 15-20 hp and 13-18 ft-lb, with sharper throttle response. The intake has enough capacity to support built engines running well beyond 1000 whp.
Do I need a tune to run this intake? No. The Eventuri Audi 8Y RS3 intake installs as a sealed bolt-on with OEM-level fitment and does not require a tune. A supporting calibration is only relevant for heavily modified, high-horsepower builds that need to make full use of the extra airflow capacity the system provides.
What is the filter and how often is it serviced? The system uses one bespoke dry cone filter, replacement part number EVE-W210-FTR in the Type D specification, with over 130,000 mm² of filtration surface area. It is a serviceable filter, so clean or replace it at regular intervals to keep the 840 CFM airflow figure consistent over time.
How does it keep intake temperatures down? The filter sits inside a fully sealed carbon housing fed by a duct sealed to the front slam panel, plus a secondary hood feed equivalent to an added 7-inch inlet. A gold reflective heat shield cuts radiant heat transfer, so the turbo draws dense, cooler air even during aggressive driving.

About Eventuri

Eventuri was founded by a team of engineers and enthusiasts with backgrounds in aeronautics and tuning, all sharing a passion for cars and performance. After owning various aftermarket intakes over the years and being disappointed with gains that seldom lived up to their claims, they decided to take things into their own hands and set a new benchmark in intake design and technology. The goal was to engineer systems that provide real, measurable gains and to publish genuine figures to back them up. Their systems are developed using cutting-edge design, testing, and prototyping methods. Each design undergoes CFD analysis and is validated at the prototype stage through volumetric airflow measurement, intake temperature testing, and extensive dynamometer testing. Eventuri publishes all development data to illustrate the full process from concept to finished product. Only the best materials are selected for every component, down to the choice of fasteners, to ensure the quality of the final product is second to none.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.