Does this exhaust fit the SLS AMG Black Series?

Yes. The Valved Sport Exhaust System for C197 Mercedes-Benz SLS AMG covers the 2010-2015 SLS AMG and the 2014-2015 SLS AMG Black Series, both built on the C197 chassis around the same 6.2-liter naturally aspirated V8. One part number spans the range, so there is no separate Black Series version to select at checkout.

Does the exhaust drone at highway speed?

No. Drone comes from low-frequency sound waves resonating inside the cabin at a steady throttle, and Valvetronic Designs tunes muffler and resonator volumes on the road to target exactly that. Closing the valves puts the system in its quietest setting, so a long highway leg stays comfortable with the full open-valve tone one switch away.

How are the exhaust valves controlled?

Pneumatic actuators open and close the valves, and the driver picks the mode. Closed, the system is subdued and refined for cold starts and neighborhood speeds. Open, it clears the restriction and lets the 6.2-liter V8 sing through the full rev range. Valvetronic Designs covers the valves, vacuum pots and electronics under a 1-year limited warranty.

Does installation require cutting or welding?

No. Valvetronic Designs builds this as a true bolt-on system that mounts to the factory hangers and mating points, so no cutting, welding or fabrication is needed. The install is fully reversible, which matters on a car people buy to keep: the factory system goes back on with no sign the swap ever happened.

How much power does it add?

Valvetronic Designs does not publish a power figure for this system. Straighter, less restrictive routing lowers backpressure in comparison to Factory Equipment, and a naturally aspirated engine generally benefits from breathing more freely, but owners fit this system for sound and control rather than for a number on a dyno sheet.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Valvetronic Designs Valved Sport Exhaust System for C197 Mercedes-Benz SLS AMG & SLS AMG Black Series

Valvetronic Designs’ Valved Sport Exhaust System for C197 Mercedes-Benz SLS AMG gives the only gullwing Mercedes of the modern era the voice its bodywork always promised. Valvetronic designs and manufactures every system in-house in Boyertown, Pennsylvania, and this one is formed from T304 stainless steel, joined with precision TIG welding, and routed to cut backpressure in comparison to Factory Equipment. Pneumatic valves hand the character of the car back to the driver: closed, the tone stays subdued and refined for a quiet departure; open, the naturally aspirated 6.2-liter V8 delivers the raw, thunderous growl and high-pitched top end that made this engine famous. The system bolts on with no cutting and no welding, and it comes off just as cleanly, which is the restraint a car of this stature deserves.

Construction

The Valved Sport Exhaust System for C197 Mercedes-Benz SLS AMG is formed entirely from T304 stainless steel, with precision TIG welding at every joint. T304 was chosen for how it stands up to heat, road salt and years of heat cycling rather than for what it costs to build, and Valvetronic Designs backs the tubes and welds with a lifetime of ownership limited warranty against defects in workmanship or material, including penetrating rust. Muffler and resonator volumes are tuned on the road rather than in simulation alone, which is how the system stays clear of the low-frequency resonance that turns a long drive into work.

Design and Performance

With the valves closed, the Valved Sport Exhaust System for C197 Mercedes-Benz SLS AMG is subdued and refined, quiet enough for a cold start in a sleeping neighborhood or a long highway leg at a steady throttle. Open them and the car changes completely: a raw, thunderous growl down low and a high-pitched roar as the 6.2-liter V8 climbs toward its limiter. Mode changes happen on demand, so the driver decides which car to bring out, and the freer routing means the engine is working against less restriction either way. The full system installs against the factory hangers and mating points, and it comes back off without a trace.

Features

T304 stainless steel construction throughout
Pneumatic valve actuation with switchable open and closed modes
Precision TIG welded joints
Free-flowing routing that reduces backpressure in comparison to Factory Equipment
Muffler and resonator tuning aimed squarely at cabin drone
Level-1 install difficulty, bolt-on with no cutting or welding
Fully reversible back to the factory system
Lifetime of ownership limited warranty on stainless tubes and welds
3-year limited warranty on mufflers and resonators
1-year limited warranty on valves, vacuum pots and electronics

Applications

Mercedes-Benz SLS AMG: C197 | 2010-2015 | 6.2L V8
Mercedes-Benz SLS AMG Black Series: C197 | 2014-2015 | 6.2L V8

Notes

Sold as one complete valved exhaust system for a single vehicle
Each Exhaust System for C197 Mercedes-Benz SLS is built to order by Valvetronic Designs with a 6 to 8 week lead time
Ships direct from Valvetronic Designs in Boyertown, Pennsylvania
Warranty exclusions include heat discoloration, damage from salt and road treatments, and finish damage from chemicals or misuse

Frequently Asked Questions

What is the Valvetronic Designs Valved Sport Exhaust System for C197 Mercedes-Benz SLS AMG made from? The Valved Sport Exhaust System for C197 Mercedes-Benz SLS AMG is built entirely from T304 stainless steel and joined with precision TIG welding. T304 handles heat and resists corrosion far better than the mild steel used in cheaper replacement systems, and Valvetronic Designs backs the tubes and welds with a lifetime of ownership limited warranty against defects in workmanship or material, including penetrating rust.
Does this exhaust fit the SLS AMG Black Series? Yes. The Valved Sport Exhaust System for C197 Mercedes-Benz SLS AMG covers the 2010-2015 SLS AMG and the 2014-2015 SLS AMG Black Series, both built on the C197 chassis around the same 6.2-liter naturally aspirated V8. One part number spans the range, so there is no separate Black Series version to select at checkout.
Does the exhaust drone at highway speed? No. Drone comes from low-frequency sound waves resonating inside the cabin at a steady throttle, and Valvetronic Designs tunes muffler and resonator volumes on the road to target exactly that. Closing the valves puts the system in its quietest setting, so a long highway leg stays comfortable with the full open-valve tone one switch away.
How are the exhaust valves controlled? Pneumatic actuators open and close the valves, and the driver picks the mode. Closed, the system is subdued and refined for cold starts and neighborhood speeds. Open, it clears the restriction and lets the 6.2-liter V8 sing through the full rev range. Valvetronic Designs covers the valves, vacuum pots and electronics under a 1-year limited warranty.
Does installation require cutting or welding? No. Valvetronic Designs builds this as a true bolt-on system that mounts to the factory hangers and mating points, so no cutting, welding or fabrication is needed. The install is fully reversible, which matters on a car people buy to keep: the factory system goes back on with no sign the swap ever happened.
How much power does it add? Valvetronic Designs does not publish a power figure for this system. Straighter, less restrictive routing lowers backpressure in comparison to Factory Equipment, and a naturally aspirated engine generally benefits from breathing more freely, but owners fit this system for sound and control rather than for a number on a dyno sheet.

About Valvetronic Designs

Valvetronic Designs, based in Boyertown, Pennsylvania, is a leader in high-performance exhaust systems, dedicated to innovation, precision, and enhancing the driving experience. Specializing in bespoke solutions for luxury and performance vehicles such as Lamborghini, Ferrari, and Porsche, Valvetronic combines advanced engineering with meticulous craftsmanship to deliver unparalleled sound and performance. With proprietary technologies like free-flow configurations and double X-pipe designs, their exhaust systems set new benchmarks for exotic and race-inspired tones. Every product is designed and manufactured in-house, ensuring exceptional quality and tailored customization, from fitment precision to sound profiles. Driven by a passion for excellence, Valvetronic Designs strives to create the ultimate auditory and performance experiences for automotive enthusiasts worldwide.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Valvetronic Designs Valved Sport Exhaust System for C197 Mercedes-Benz SLS AMG & SLS AMG Black Series [MER.SLS.AMG.VSES.BR]

Guaranteed Safe Checkout

Valvetronic Designs Valved Sport Exhaust System for C197 Mercedes-Benz SLS AMG & SLS AMG Black Series

Construction

Design and Performance

Features

Applications

Notes

Frequently Asked Questions

About Valvetronic Designs

Reviews