What BMW models are the TREVORA PR-1 side skirts compatible with?

The TREVORA PR-1 Pre-preg Carbon Fiber Side Skirts are designed for the 2021 and newer BMW M4 G82 Coupe and the 2021 and newer BMW M4 G83 Convertible. Fitment on other BMW models including the G80/G81 M3 is not confirmed from the source material.

How do the PR-1 side skirts install on the G82 and G83?

The side skirts align to factory mounting locations on the lower body of the G82 and G83 and are secured using the supplied hardware. Proper surface preparation is required before installation. Professional installation is recommended. Whether adhesive is used alongside the hardware should be confirmed with Bulletproof Automotive before fitting.

What is the UV-resistant clear coat and why does it matter on a side skirt?

The UV-resistant clear coat is a protective layer applied over the carbon fiber surface that shields the weave and resin from ultraviolet degradation. Side skirts run the full length of the lower body and are consistently exposed to direct sunlight. Without UV protection, the clear coat and underlying resin can degrade over time, affecting the appearance of the surface. The UV-resistant formulation maintains the high-gloss finish of the skirts across long-term use.

What is the difference between the TREVORA PR-1 side skirts for the G82/G83 M4 and the PR-1 side skirts for the G80/G81 M3?

Both the G82/G83 M4 and G80/G81 M3 variants carry the PR-1 designation and share the same pre-preg carbon construction standard and design approach, but they are engineered to the specific lower body geometry of each platform. The G82/G83 M4 skirts are developed for the coupe and convertible body styles of the M4; the G80/G81 M3 skirts are developed for the sedan and touring body styles of the M3. The two sets are not interchangeable.

What is pre-preg carbon fiber and why is it better than wet-laid carbon on a side skirt?

Pre-preg carbon fiber is manufactured by pre-impregnating the carbon fabric with a precisely controlled resin ratio before the component is formed and cured. This produces a more consistent 2x2 twill weave and superior surface quality compared to wet-laid carbon, where resin is applied manually and distribution is harder to control across a long panel. On a side skirt that runs the full length of the lower body and is visible at close range from standing height, weave consistency and finish quality across the full length of both skirts are directly apparent; pre-preg construction ensures both.

Do the PR-1 side skirts work alongside other TREVORA G82/G83 M4 components?

Yes. The PR-1 side skirts are part of the TREVORA PR-1 design program for the G8X M3 and M4 platform, which also includes the PR-1 front splitter for the G80/G81/G82/G83 platform. Contact Bulletproof Automotive for guidance on building a complete exterior package for the G82 or G83 M4.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Trevora Carbon PR-1 Side Skirts for G8x BMW M4

The side profile of the G82 and G83 M4 is one of the car’s most read angles, and the PR-1 side skirts are built to sharpen it. The design adds visual width and a more aggressive lower body presence that complements the M4’s existing aerodynamic character without introducing elements that compete with the factory lines. The result is a lower body treatment that reads as more purposeful and motorsport-influenced from every lateral angle, while staying within the proportions the G82 and G83 body style establishes.

Carbon Fiber Construction

Constructed using high-quality autoclave-cured pre-preg carbon fiber for superior strength-to-weight ratio. Each component is engineered and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. A UV-resistant clear coat protects the clean weave pattern and maintains finish quality over time, ensuring long-term durability in both daily driving and high-performance environments.

Features

Pre-preg carbon fiber construction with 2×2 twill weave and UV-resistant clear coat finish
PR-1 design increases visual width and planted lower body stance of the G82 and G83 M4
OEM-level fitment and alignment using factory mounting locations
Superior strength-to-weight ratio and consistent surface finish versus wet-laid carbon alternatives
UV-resistant clear coat for long-term finish durability
Supplied hardware included for installation
Backed by Trevora’s industry-leading 5-year warranty

Included in Box

PR-1 Side Skirts
Required mounting hardware
Installation instructions

Applications

BMW M4: G82, G83 | 2021-present

Frequently Asked Questions

What BMW models are the TREVORA PR-1 side skirts compatible with? The TREVORA PR-1 Pre-preg Carbon Fiber Side Skirts are designed for the 2021 and newer BMW M4 G82 Coupe and the 2021 and newer BMW M4 G83 Convertible. Fitment on other BMW models including the G80/G81 M3 is not confirmed from the source material.
How do the PR-1 side skirts install on the G82 and G83? The side skirts align to factory mounting locations on the lower body of the G82 and G83 and are secured using the supplied hardware. Proper surface preparation is required before installation. Professional installation is recommended. Whether adhesive is used alongside the hardware should be confirmed with Bulletproof Automotive before fitting.
What is the UV-resistant clear coat and why does it matter on a side skirt? The UV-resistant clear coat is a protective layer applied over the carbon fiber surface that shields the weave and resin from ultraviolet degradation. Side skirts run the full length of the lower body and are consistently exposed to direct sunlight. Without UV protection, the clear coat and underlying resin can degrade over time, affecting the appearance of the surface. The UV-resistant formulation maintains the high-gloss finish of the skirts across long-term use.
What is the difference between the TREVORA PR-1 side skirts for the G82/G83 M4 and the PR-1 side skirts for the G80/G81 M3? Both the G82/G83 M4 and G80/G81 M3 variants carry the PR-1 designation and share the same pre-preg carbon construction standard and design approach, but they are engineered to the specific lower body geometry of each platform. The G82/G83 M4 skirts are developed for the coupe and convertible body styles of the M4; the G80/G81 M3 skirts are developed for the sedan and touring body styles of the M3. The two sets are not interchangeable.
What is pre-preg carbon fiber and why is it better than wet-laid carbon on a side skirt? Pre-preg carbon fiber is manufactured by pre-impregnating the carbon fabric with a precisely controlled resin ratio before the component is formed and cured. This produces a more consistent 2×2 twill weave and superior surface quality compared to wet-laid carbon, where resin is applied manually and distribution is harder to control across a long panel. On a side skirt that runs the full length of the lower body and is visible at close range from standing height, weave consistency and finish quality across the full length of both skirts are directly apparent; pre-preg construction ensures both.
Do the PR-1 side skirts work alongside other TREVORA G82/G83 M4 components? Yes. The PR-1 side skirts are part of the TREVORA PR-1 design program for the G8X M3 and M4 platform, which also includes the PR-1 front splitter for the G80/G81/G82/G83 platform. Contact Bulletproof Automotive for guidance on building a complete exterior package for the G82 or G83 M4.

About Trevora

Trevora (formerly TRE) is a UK-based automotive aero and styling brand specializing in high-performance pre-preg carbon fiber components. Founded in 2018, Trevora has grown into a globally recognized name in BMW aftermarket parts, known for its OEM+ philosophy, precision engineering, and uncompromising attention to detail. Every component is designed, engineered, and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. By utilizing autoclave-cured pre-preg carbon fiber, Trevora delivers a superior strength-to-weight ratio while eliminating inconsistencies found in traditional wet-lay carbon. All products are backed by Trevora’s industry-leading 5-year warranty.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Trevora Carbon PR-1 Side Skirts for G8x BMW M4 [TR-BG82SSCF]

Guaranteed Safe Checkout