What BMW models are these mirror covers compatible with?

The TREVORA M-Style Wing Mirror Covers are compatible with the BMW F20 and F21 1 Series from 2012 to 2019, the BMW F22 2 Series from 2014 to 2021, the BMW F30 3 Series from 2012 to 2019, the BMW F32 4 Series from 2014 to 2020, and the BMW F87 M2 from 2016 to 2021. Fitment on F-chassis variants not listed or other BMW generations is not confirmed.

Are these covers for left-hand drive, right-hand drive, or both?

The source material does not specify whether these covers are designed for left-hand drive, right-hand drive, or both configurations. Confirm drivetrain compatibility with Bulletproof Automotive before purchasing, particularly if your vehicle is right-hand drive specification.

What makes the M-style design different from standard BMW mirror covers?

The M-style mirror cover design has a sharper, more pronounced housing form than the standard BMW mirror housing, adding visual definition and depth to the side profile of the vehicle. The change is visible from alongside and behind the car, and the more aggressive shape reads as a deliberate performance-oriented modification rather than a straightforward carbon replacement of the standard housing.

Do these covers require any drilling or permanent modification?

No. The TREVORA M-style mirror covers are direct replacements for the factory mirror housing covers, installing using the original mounting points on the mirror base. No drilling or permanent modification to the vehicle is required. Care should be taken during removal of the factory covers to avoid damaging the factory clips or mounting tabs, which is why professional installation is recommended.

What is the UV-resistant clear coat and why does it matter on a mirror cover?

The UV-resistant clear coat is a protective layer applied over the carbon fiber surface that shields the weave and resin from degradation caused by ultraviolet light exposure. Mirror covers are among the most UV-exposed carbon fiber components on a car, facing direct sunlight from both above and reflected from road surfaces. Without UV protection, the clear coat and underlying resin can yellow or degrade over time, affecting the appearance of the carbon surface. The UV-resistant formulation on these covers is designed to maintain the high-gloss finish across long-term use.

What is pre-preg carbon fiber and why does it produce a better finish than wet-laid carbon?

Pre-preg carbon fiber is manufactured by pre-impregnating the carbon fabric with a precisely controlled resin ratio before the component is formed and cured. This produces a consistent 2x2 twill weave pattern and a uniform high-gloss surface finish across both covers. Wet-laid carbon applies resin manually, making consistent resin distribution harder to control, particularly on curved surfaces like a mirror housing. On a component at eye level that is examined closely from the side of the car, the surface quality of pre-preg construction is directly visible and distinguishes it from lower-quality alternatives.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Trevora M Styled Carbon Wing Mirror Covers for F-Chassis BMW

Wing mirror covers are among the most visible carbon fiber details on any BMW F-chassis model, sitting at eye level along the side of the car and seen clearly from every approach angle. For a carbon mirror cover to enhance the side profile rather than simply replacing a painted unit, it needs to combine a sharper design with a finish quality that holds up under close-range scrutiny. The TREVORA M-style covers deliver both. The M-style design is more pronounced than the standard housing shape, introducing a sharper form that adds definition and visual depth to the side profile without departing from the proportional character of the F-chassis platform. The change reads clearly from alongside and behind the car, sharpening the side presence of the vehicle in a way that works with the existing body lines.

Carbon Fiber Construction

Constructed using high-quality autoclave-cured pre-preg carbon fiber for superior strength-to-weight ratio. Each component is engineered and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. A UV-resistant clear coat protects the clean weave pattern and maintains finish quality over time, ensuring long-term durability in both daily driving and high-performance environments.

Features

Pre-preg carbon fiber construction with 2×2 twill weave and UV-resistant clear coat finish
M-style design provides a sharper, more pronounced housing shape versus standard mirror covers
Direct OEM replacement; installs using factory mounting points for OEM-level alignment
Consistent high-quality weave finish across both left and right covers
Lightweight construction; superior strength-to-weight ratio versus OEM plastic housings
Backed by Trevora’s industry-leading 5-year warranty

Included in Box

Mirror Covers
Required mounting hardware
Installation instructions

Applications

BMW 1 Series: F20, F21 | 2012-2019
BMW 2 Series: F22 | 2014-2021
BMW 3 Series: F30 | 2012-2019
BMW 4 Series: F32 | 2014-2020
BMW M2: F87 | 2016-2021

Frequently Asked Questions

What BMW models are these mirror covers compatible with? The TREVORA M-Style Wing Mirror Covers are compatible with the BMW F20 and F21 1 Series from 2012 to 2019, the BMW F22 2 Series from 2014 to 2021, the BMW F30 3 Series from 2012 to 2019, the BMW F32 4 Series from 2014 to 2020, and the BMW F87 M2 from 2016 to 2021. Fitment on F-chassis variants not listed or other BMW generations is not confirmed.
Are these covers for left-hand drive, right-hand drive, or both? The source material does not specify whether these covers are designed for left-hand drive, right-hand drive, or both configurations. Confirm drivetrain compatibility with Bulletproof Automotive before purchasing, particularly if your vehicle is right-hand drive specification.
What makes the M-style design different from standard BMW mirror covers? The M-style mirror cover design has a sharper, more pronounced housing form than the standard BMW mirror housing, adding visual definition and depth to the side profile of the vehicle. The change is visible from alongside and behind the car, and the more aggressive shape reads as a deliberate performance-oriented modification rather than a straightforward carbon replacement of the standard housing.
Do these covers require any drilling or permanent modification? No. The TREVORA M-style mirror covers are direct replacements for the factory mirror housing covers, installing using the original mounting points on the mirror base. No drilling or permanent modification to the vehicle is required. Care should be taken during removal of the factory covers to avoid damaging the factory clips or mounting tabs, which is why professional installation is recommended.
What is the UV-resistant clear coat and why does it matter on a mirror cover? The UV-resistant clear coat is a protective layer applied over the carbon fiber surface that shields the weave and resin from degradation caused by ultraviolet light exposure. Mirror covers are among the most UV-exposed carbon fiber components on a car, facing direct sunlight from both above and reflected from road surfaces. Without UV protection, the clear coat and underlying resin can yellow or degrade over time, affecting the appearance of the carbon surface. The UV-resistant formulation on these covers is designed to maintain the high-gloss finish across long-term use.
What is pre-preg carbon fiber and why does it produce a better finish than wet-laid carbon? Pre-preg carbon fiber is manufactured by pre-impregnating the carbon fabric with a precisely controlled resin ratio before the component is formed and cured. This produces a consistent 2×2 twill weave pattern and a uniform high-gloss surface finish across both covers. Wet-laid carbon applies resin manually, making consistent resin distribution harder to control, particularly on curved surfaces like a mirror housing. On a component at eye level that is examined closely from the side of the car, the surface quality of pre-preg construction is directly visible and distinguishes it from lower-quality alternatives.

About Trevora

Trevora (formerly TRE) is a UK-based automotive aero and styling brand specializing in high-performance pre-preg carbon fiber components. Founded in 2018, Trevora has grown into a globally recognized name in BMW aftermarket parts, known for its OEM+ philosophy, precision engineering, and uncompromising attention to detail. Every component is designed, engineered, and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. By utilizing autoclave-cured pre-preg carbon fiber, Trevora delivers a superior strength-to-weight ratio while eliminating inconsistencies found in traditional wet-lay carbon. All products are backed by Trevora’s industry-leading 5-year warranty.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.