Trevora ID-01 Carbon Front Splitter & Rear Spoiler Pack for G42 BMW M240i

The ID-01 pack is built around the principle that front and rear aero upgrades work better as a matched pair. Buying the front splitter and rear spoiler separately addresses one end of the car and leaves the other visually incomplete; the pack addresses both in a single step with components that share the same design language, the same manufacturing standard, and the same finish quality. The result is a G42 that reads as cohesively upgraded rather than partially modified. The ID-01 Front Splitter extends the lower front bumper with a full-length design and sharp central edges that sharpen the front-end profile without departing from the factory proportions of the M Sport bumper. It uses all OEM mounting points on the G42 M Sport front bumper for installation, requiring no additional drilling or bolting into the bumper structure. The front splitter is compatible with M Sport bumper variants only; buyers should confirm their bumper specification before ordering. The ID-01 Rear Spoiler replaces the factory boot lid lip with a clean, defined rear deck treatment that adds visual presence and a degree of aerodynamic function to the rear end. Installation uses pre-applied 3M double-sided automotive tape and the included adhesive promoter, taking approximately 30 minutes to complete with a one-hour tape cure period before the car should be driven. Both the spoiler and the splitter are reversible installations that do not require permanent modification to the vehicle.

Carbon Fiber Construction

• Constructed using high-quality autoclave-cured pre-preg carbon fiber for superior strength-to-weight ratio. Each component is engineered and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. A UV-resistant clear coat protects the clean weave pattern and maintains finish quality over time, ensuring long-term durability in both daily driving and high-performance environments.

Features

• Two-component ID-01 aero pack covering both front and rear of the G42 M240i
• Pre-preg carbon fiber, 2×2 twill weave construction across both components
• Matched ID-01 design language; sharp-edged clean aesthetic consistent front to rear
• 2-year warranty on manufacturing defects for both components
• Front splitter uses OEM mounting points; no additional drilling required
• Rear spoiler installs with pre-applied 3M double-sided automotive tape and included adhesive promoter
• Rear spoiler installation time approximately 30 minutes plus one-hour tape cure
• Both installations are reversible; no permanent modification to the vehicle
• Backed by Trevora’s industry-leading 5-year warranty

Included in Box

• Carbon Front Splitter
• Carbon Rear Spoiler
• Required mounting hardware
• Installation instructions

Applications

• BMW M240i: G42 | 2021-present

Notes

• Front splitter compatible with M Sport bumper only; confirm bumper specification before ordering

Frequently Asked Questions

• What vehicles is the TREVORA ID-01 pack compatible with? The TREVORA ID-01 Carbon Front Splitter and Rear Spoiler Pack is designed for the 2021 and newer BMW M240i G42 and the 2021 and newer BMW 2 Series G42 in M Sport trim. The front splitter is compatible with the M Sport front bumper configuration only; the standard non-M Sport G42 bumper uses a different shape and the splitter will not fit correctly on that variant. Confirm your bumper specification before ordering.
• Does the ID-01 pack include everything needed for installation? Yes. The front splitter uses OEM mounting points and no additional hardware is required for that component. The rear spoiler comes with pre-applied 3M double-sided automotive tape and an included adhesive promoter; nothing additional needs to be sourced to complete the spoiler installation. Both installations can be completed without specialist tools.
• How long does the rear spoiler installation take? The rear spoiler installation takes approximately 30 minutes from surface preparation to fitting. A one-hour tape cure period is recommended after installation before driving the vehicle; moving the car before the adhesive has fully set may compromise the bond and affect the long-term security of the fitment.
• What does the 2-year warranty cover? The 2-year warranty covers manufacturing defects on both the front splitter and rear spoiler. It does not cover damage resulting from installation, road use, contact with road debris, or improper maintenance of the carbon fiber surfaces. Contact Bulletproof Automotive with any warranty concerns.
• Is this pack better value than buying the front splitter and rear spoiler separately? The ID-01 pack combines both components in a single purchase and ensures both parts share the same production batch, meaning consistent finish quality and weave alignment between the front splitter and rear spoiler. Buying separately introduces the possibility of minor batch-to-batch variation in finish. The pack also simplifies the purchasing process for owners who plan to upgrade both ends of the car.
• Can the ID-01 spoiler and splitter be removed if needed? Yes. Both the front splitter and the rear spoiler are designed for reversible installation. The front splitter uses OEM mounting points and can be removed without modification to the bumper. The rear spoiler uses pre-applied 3M tape which is a permanent adhesive system; removal after full cure should be approached carefully as it may affect the paint or surface finish of the boot lid. Neither installation requires permanent modification to the vehicle structure.

About Trevora

Trevora (formerly TRE) is a UK-based automotive aero and styling brand specializing in high-performance pre-preg carbon fiber components. Founded in 2018, Trevora has grown into a globally recognized name in BMW aftermarket parts, known for its OEM+ philosophy, precision engineering, and uncompromising attention to detail. Every component is designed, engineered, and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. By utilizing autoclave-cured pre-preg carbon fiber, Trevora delivers a superior strength-to-weight ratio while eliminating inconsistencies found in traditional wet-lay carbon. All products are backed by Trevora’s industry-leading 5-year warranty.