What vehicles is the TREVORA pre-preg carbon spoiler compatible with?

The TREVORA Pre-preg Carbon Fiber Rear Spoiler is compatible with the 2024 and newer BMW M5 G90, the 2024 and newer BMW M5 Touring G99, and the 2024 and newer BMW 5 Series G60. Fitment on earlier 5 Series or M5 generations is not confirmed.

Does the spoiler require drilling or modification to the boot lid?

No. The spoiler mounts using pre-applied 3M automotive-grade double-sided tape and an included adhesive promoter. No drilling or modification to the factory boot lid or body structure is required. The boot lid surface must be thoroughly cleaned and degreased before installation, and the adhesive should be allowed to cure fully before driving.

What does it mean that this spoiler is fitted to TREVORA's own G90 M5 build?

TREVORA fitted this same specification spoiler to their own BMW G90 M5 build rather than a different or upgraded specification. This confirms that the product performs to the standard TREVORA considers appropriate for their own car, which is a meaningful indicator of quality and confidence in the component that goes beyond a standard product description.

What is pre-preg carbon fiber and why does it produce a better finish than wet layup carbon?

Pre-preg carbon fiber is produced by pre-impregnating the carbon fabric with a precisely controlled resin ratio before the component is formed and cured. This produces consistent weave alignment, better structural integrity, and a surface finish that is visually uniform across the full panel. Wet layup carbon applies resin manually, making it harder to control the distribution and resulting in surface inconsistency that becomes visible on larger panels. On a boot lid spoiler viewed at standing height from directly behind the car, weave consistency and gloss finish quality are immediately apparent; pre-preg construction ensures both.

Does the adhesive cure time affect when I can drive the car?

Yes. The adhesive should be allowed to cure fully before driving. Vehicle movement during the cure period can disrupt the bond before it has set, affecting the long-term security of the fitment. Professional installation is recommended; the installer can advise on the specific cure time required under the conditions at the time of fitting.

Does this spoiler work as part of a broader TREVORA aero package for the G60 and G90?

Yes. TREVORA produces additional aero components for the G60 5 Series and G90 M5 platforms, including the PR-1 front splitter and PR-1 side skirts. This rear spoiler shares the same pre-preg carbon fiber manufacturing standard and OEM+ design direction and works as part of a complete exterior upgrade alongside those components.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Trevora Carbon Rear Spoiler for G60 / G90 BMW 5 Series & M5

The TREVORA rear spoiler for the G60 and G90 is a considered addition to the roofline, shaped to complement the factory bodywork without imposing a design language that works against the premium character of either platform. The profile is clean and motorsport-informed; present enough to sharpen the boot lid visually and contribute to rear-end aerodynamic stability, but measured enough to stay within the proportions the car’s design already sets up. What separates this spoiler from the broader market for G60 and G90 rear additions is the manufacturing standard. Pre-preg carbon fiber applies resin at a precisely controlled ratio before the component is formed and cured, producing consistent weave alignment and a surface finish that matches the quality and appearance expectations of an OEM M Performance part. The 2×2 twill weave and high-gloss clear coat deliver a carbon surface that reads as premium at close range and in direct light; the kind of finish where the weave pattern is uniform from one end of the panel to the other.

Carbon Fiber Construction

Constructed using high-quality autoclave-cured pre-preg carbon fiber for superior strength-to-weight ratio. Each component is engineered and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. A UV-resistant clear coat protects the clean weave pattern and maintains finish quality over time, ensuring long-term durability in both daily driving and high-performance environments.

Features

Pre-preg carbon fiber construction with 2×2 twill weave and high-gloss clear coat finish
OEM+ profile designed to integrate cleanly with the G60 and G90 boot lid and factory body lines
Pre-applied 3M automotive-grade double-sided tape for secure, clean installation
Includes adhesive promoter for a lasting bond
No drilling or modification to the factory boot lid or body structure required
Lighter than factory painted spoiler alternatives
Same specification as the spoiler fitted to TREVORA’s own BMW G90 M5 build
Backed by Trevora’s industry-leading 5-year warranty

Included in Box

Carbon Fiber Rear Spoiler
Required mounting hardware
Installation instructions

Applications

BMW 520d: G60 | 2023-present
BMW 530d: G60 | 2023-present
BMW 550e: G60 | 2023-present
BMW 520i: G60 | 2023-present
BMW 530i: G60 | 2023-present
BMW 540i: G60 | 2023-present
BMW M5: G90 | 2024-present

Frequently Asked Questions

What vehicles is the TREVORA pre-preg carbon spoiler compatible with? The TREVORA Pre-preg Carbon Fiber Rear Spoiler is compatible with the 2024 and newer BMW M5 G90, the 2024 and newer BMW M5 Touring G99, and the 2024 and newer BMW 5 Series G60. Fitment on earlier 5 Series or M5 generations is not confirmed.
Does the spoiler require drilling or modification to the boot lid? No. The spoiler mounts using pre-applied 3M automotive-grade double-sided tape and an included adhesive promoter. No drilling or modification to the factory boot lid or body structure is required. The boot lid surface must be thoroughly cleaned and degreased before installation, and the adhesive should be allowed to cure fully before driving.
What does it mean that this spoiler is fitted to TREVORA’s own G90 M5 build? TREVORA fitted this same specification spoiler to their own BMW G90 M5 build rather than a different or upgraded specification. This confirms that the product performs to the standard TREVORA considers appropriate for their own car, which is a meaningful indicator of quality and confidence in the component that goes beyond a standard product description.
What is pre-preg carbon fiber and why does it produce a better finish than wet layup carbon? Pre-preg carbon fiber is produced by pre-impregnating the carbon fabric with a precisely controlled resin ratio before the component is formed and cured. This produces consistent weave alignment, better structural integrity, and a surface finish that is visually uniform across the full panel. Wet layup carbon applies resin manually, making it harder to control the distribution and resulting in surface inconsistency that becomes visible on larger panels. On a boot lid spoiler viewed at standing height from directly behind the car, weave consistency and gloss finish quality are immediately apparent; pre-preg construction ensures both.
Does the adhesive cure time affect when I can drive the car? Yes. The adhesive should be allowed to cure fully before driving. Vehicle movement during the cure period can disrupt the bond before it has set, affecting the long-term security of the fitment. Professional installation is recommended; the installer can advise on the specific cure time required under the conditions at the time of fitting.
Does this spoiler work as part of a broader TREVORA aero package for the G60 and G90? Yes. TREVORA produces additional aero components for the G60 5 Series and G90 M5 platforms, including the PR-1 front splitter and PR-1 side skirts. This rear spoiler shares the same pre-preg carbon fiber manufacturing standard and OEM+ design direction and works as part of a complete exterior upgrade alongside those components.

About Trevora

Trevora (formerly TRE) is a UK-based automotive aero and styling brand specializing in high-performance pre-preg carbon fiber components. Founded in 2018, Trevora has grown into a globally recognized name in BMW aftermarket parts, known for its OEM+ philosophy, precision engineering, and uncompromising attention to detail. Every component is designed, engineered, and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. By utilizing autoclave-cured pre-preg carbon fiber, Trevora delivers a superior strength-to-weight ratio while eliminating inconsistencies found in traditional wet-lay carbon. All products are backed by Trevora’s industry-leading 5-year warranty.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.