What BMW models is the TREVORA PR-1 rear roof spoiler compatible with?

The TREVORA PR-1 Carbon Fiber Rear Roof Spoiler is designed specifically for the BMW G99 M5 Touring and the BMW G61 5 Series Touring. It is not confirmed for fitment on saloon, coupe, or other body styles within the BMW M5 or 5 Series range, as the spoiler is developed specifically for the Touring extended roofline geometry.

Does the PR-1 roof spoiler require drilling or modification to the factory roof?

No. The PR-1 rear roof spoiler uses pre-applied 3M automotive-grade tape and an included adhesive promoter for installation. No drilling or modification to the factory roof panel is required. The surface must be thoroughly cleaned and degreased before fitting, and the adhesive should cure fully before driving.

How does the PR-1 spoiler improve aerodynamic performance on a Touring?

The extended roofline of a Touring body creates a larger rear surface area that generates more lift at speed compared to a saloon or coupe. The PR-1 spoiler's sharper trailing edge manages the airflow transition from the roof surface to the rear of the car, reducing lift and improving stability at higher speeds. This functional benefit is specific to the Touring body style and is part of why the spoiler was developed as a touring-specific component rather than a shared design across body styles.

Why is this spoiler designed specifically for the Touring and not other body styles?

The roofline geometry, trailing edge angle, and surface area of a Touring differ significantly from a saloon or coupe. A spoiler developed for the Touring chassis is shaped to the specific proportions and aerodynamic requirements of that body style; fitting a saloon or coupe spoiler to a Touring, or vice versa, would result in poor fitment and would not deliver the intended aerodynamic or visual result. The PR-1 was developed specifically for the G99 and G61 Touring platforms from the ground up.

What is the surface finish quality of the PR-1 carbon fiber spoiler?

The PR-1 rear roof spoiler is constructed from 2x2 pre-preg carbon fiber with a high-gloss clear coat finish. Pre-preg manufacturing controls the resin ratio precisely before the component is formed and cured, producing a consistent weave alignment and a surface finish that meets OEM-level expectations. The high-gloss finish is particularly suited to the G99 M5 Touring and G61, where the premium character of the vehicle sets high expectations for any exterior addition.

Who developed the TREVORA PR-1 roof spoiler and where is it made?

The TREVORA PR-1 Carbon Fiber Rear Roof Spoiler was designed and developed in the United Kingdom in collaboration with AUTOID. It is constructed from premium 2x2 pre-preg carbon fiber and developed specifically for the G99 M5 Touring and G61 5 Series Touring platforms.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Trevora Carbon PR-1 Rear Roof Spoiler for G99 / G61 BMW M5 & 5 Series

The TREVORA PR-1 Carbon Fiber Rear Roof Spoiler is a touring-specific aero upgrade developed in the United Kingdom in collaboration with AUTOID for the BMW G99 M5 Touring and G61 5 Series Touring. Constructed from premium 2×2 pre-preg carbon fiber and installed using pre-applied 3M automotive-grade tape with an included adhesive promoter, the PR-1 extends the roofline with a sharper trailing edge that improves rear aerodynamic stability while adding a more purposeful, motorsport-inspired appearance to the Touring chassis.

Carbon Fiber Construction

Constructed using high-quality autoclave-cured pre-preg carbon fiber for superior strength-to-weight ratio. Each component is engineered and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. A UV-resistant clear coat protects the clean weave pattern and maintains finish quality over time, ensuring long-term durability in both daily driving and high-performance environments.

Features

OEM+ fitment – engineered specifically for the listed BMW platform
Pre-preg autoclave-cured carbon fiber construction
UV-resistant clear coat finish
Superior strength-to-weight ratio versus wet-lay carbon
Direct OEM fitment
Plug-and-play installation
Backed by Trevora’s industry-leading 5-year warranty

Included in Box

Carbon Fiber PR-1 Rear Roof Spoiler
Required mounting hardware
Installation instructions

Application

BMW 520d: G61 | 2024-present
BMW 530d: G61 | 2024-present
BMW 520i: G61 | 2024-present
BMW 530i: G61 | 2024-present
BMW 540i: G61 | 2024-present
BMW 550e: G61 | 2024-present
BMW M5: G99 | 2025-present

Frequently Asked Questions

What BMW models is the TREVORA PR-1 rear roof spoiler compatible with? The TREVORA PR-1 Carbon Fiber Rear Roof Spoiler is designed specifically for the BMW G99 M5 Touring and the BMW G61 5 Series Touring. It is not confirmed for fitment on saloon, coupe, or other body styles within the BMW M5 or 5 Series range, as the spoiler is developed specifically for the Touring extended roofline geometry.
Does the PR-1 roof spoiler require drilling or modification to the factory roof? No. The PR-1 rear roof spoiler uses pre-applied 3M automotive-grade tape and an included adhesive promoter for installation. No drilling or modification to the factory roof panel is required. The surface must be thoroughly cleaned and degreased before fitting, and the adhesive should cure fully before driving.
How does the PR-1 spoiler improve aerodynamic performance on a Touring? The extended roofline of a Touring body creates a larger rear surface area that generates more lift at speed compared to a saloon or coupe. The PR-1 spoiler’s sharper trailing edge manages the airflow transition from the roof surface to the rear of the car, reducing lift and improving stability at higher speeds. This functional benefit is specific to the Touring body style and is part of why the spoiler was developed as a touring-specific component rather than a shared design across body styles.
Why is this spoiler designed specifically for the Touring and not other body styles? The roofline geometry, trailing edge angle, and surface area of a Touring differ significantly from a saloon or coupe. A spoiler developed for the Touring chassis is shaped to the specific proportions and aerodynamic requirements of that body style; fitting a saloon or coupe spoiler to a Touring, or vice versa, would result in poor fitment and would not deliver the intended aerodynamic or visual result. The PR-1 was developed specifically for the G99 and G61 Touring platforms from the ground up.
What is the surface finish quality of the PR-1 carbon fiber spoiler? The PR-1 rear roof spoiler is constructed from 2×2 pre-preg carbon fiber with a high-gloss clear coat finish. Pre-preg manufacturing controls the resin ratio precisely before the component is formed and cured, producing a consistent weave alignment and a surface finish that meets OEM-level expectations. The high-gloss finish is particularly suited to the G99 M5 Touring and G61, where the premium character of the vehicle sets high expectations for any exterior addition.
Who developed the TREVORA PR-1 roof spoiler and where is it made? The TREVORA PR-1 Carbon Fiber Rear Roof Spoiler was designed and developed in the United Kingdom in collaboration with AUTOID. It is constructed from premium 2×2 pre-preg carbon fiber and developed specifically for the G99 M5 Touring and G61 5 Series Touring platforms.

About Trevora

Trevora (formerly TRE) is a UK-based automotive aero and styling brand specializing in high-performance pre-preg carbon fiber components. Founded in 2018, Trevora has grown into a globally recognized name in BMW aftermarket parts, known for its OEM+ philosophy, precision engineering, and uncompromising attention to detail. Every component is designed, engineered, and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. By utilizing autoclave-cured pre-preg carbon fiber, Trevora delivers a superior strength-to-weight ratio while eliminating inconsistencies found in traditional wet-lay carbon. All products are backed by Trevora’s industry-leading 5-year warranty.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.