What vehicles are these mirror covers compatible with?

The TREVORA Pre-preg Carbon Fiber Mirror Covers are confirmed for the 2024 and newer BMW 5 Series G60 Sedan and G61 Touring. Fitment on the 2024 and newer BMW X3 G45 should be confirmed with Bulletproof Automotive before ordering, as this platform is noted for confirmation in the source material rather than being fully independently verified.

Are both left and right covers included?

Yes. The set includes both the left and right mirror covers. No additional purchase is required to cover both sides of the vehicle.

Does installation require modification to the mirror assembly?

No. The TREVORA mirror covers are designed as direct OEM replacements using the factory clip mounting system. No modification to the mirror assembly or surrounding bodywork is required. Professional installation is recommended to ensure the factory clips and mounting tabs are not damaged during the removal of the original covers and the fitting of the replacements.

Why is the G45 X3 fitment listed as needing confirmation?

The source material lists the G45 X3 as a compatible platform with a note to confirm fitment directly with the distributor rather than listing it as fully independently verified. This means buyers with a G45 X3 should contact Bulletproof Automotive before purchasing to confirm that the mounting clip geometry on their specific vehicle matches the G60/G61 specification these covers are designed around.

What is pre-preg carbon fiber and why does it produce a better finish on a mirror cover?

Pre-preg carbon fiber is produced by pre-impregnating the carbon fabric with a precisely controlled resin ratio before the component is formed and cured. On a curved component like a mirror housing, maintaining consistent resin distribution across the full surface is more demanding than on a flat panel; wet-laid carbon applies resin manually, making uniform distribution harder to achieve. Pre-preg construction eliminates this variability, producing a consistent 2x2 twill weave pattern and a uniform high-gloss finish across both covers. At eye level and close range, the difference in surface consistency between pre-preg and wet-laid carbon is directly visible.

What does the UV-resistant clear coat do on a mirror cover?

Mirror covers face direct sunlight from above and reflected UV from road surfaces, making them among the more UV-exposed carbon fiber components on a vehicle. Without UV protection, prolonged exposure can cause the clear coat and underlying resin to yellow or degrade, affecting the appearance of the weave over time. The UV-resistant clear coat on these covers protects the carbon surface from this degradation, maintaining the high-gloss finish across long-term use.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Trevora Carbon Mirror Covers for G6x / G45 BMW 5-Series & X3

Mirror covers on the G60 and G61 5 Series and G45 X3 sit at a prominent position along the side of the vehicle where they are seen clearly at every approach angle. For a carbon replacement to read as an intentional upgrade rather than a simple material swap, it needs to match the factory housing contours precisely and carry a finish that holds up under the close-range scrutiny that a component at eye level invites. The TREVORA covers are built to both requirements. Construction uses 2×2 twill pre-preg carbon fiber, applying resin at a controlled ratio before the component is formed and cured. Pre-preg manufacturing produces consistent weave alignment and a cleaner, more uniform weave pattern across the full surface of the housing compared to wet-laid alternatives, where resin is applied manually and distribution is harder to control on complex curved surfaces. A UV-resistant clear coat is applied over the carbon surface to protect the weave and resin from ultraviolet degradation, maintaining the high-gloss appearance of the covers across sustained outdoor exposure and regular use.

Carbon Fiber Construction

Constructed using high-quality autoclave-cured pre-preg carbon fiber for superior strength-to-weight ratio. Each component is engineered and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. A UV-resistant clear coat protects the clean weave pattern and maintains finish quality over time, ensuring long-term durability in both daily driving and high-performance environments.

Features

Pre-preg carbon fiber construction with 2×2 twill weave and UV-resistant clear coat finish
Direct OEM replacement design using factory clip mounting system; no modification required
Consistent weave alignment across both left and right covers
OEM-level fitment and panel alignment with G60/G61 and G45 bodywork
Lightweight; superior strength-to-weight ratio versus OEM plastic housings
Includes both left and right covers as a complete pair
Backed by Trevora’s industry-leading 5-year warranty

Included in Box

Mirror Covers
Required mounting hardware
Installation instructions

Applications

BMW 520d: G60, G61 | 2023-present
BMW 530d: G60, G61 | 2023-present
BMW 550e: G60, G61 | 2023-present
BMW 520i: G60, G61 | 2023-present
BMW 530i: G60, G61 | 2023-present
BMW 540i: G60, G61 | 2023-present
BMW X3 xDrive20d: G45 | 2024-present
BMW X3 xDrive30d: G45 | 2024-present
BMW X3 xDrive20i: G45 | 2024-present
BMW X3 xDrive30i: G45 | 2024-present
BMW X3 M50: G45 | 2024-present

Frequently Asked Questions

What vehicles are these mirror covers compatible with? The TREVORA Pre-preg Carbon Fiber Mirror Covers are confirmed for the 2024 and newer BMW 5 Series G60 Sedan and G61 Touring. Fitment on the 2024 and newer BMW X3 G45 should be confirmed with Bulletproof Automotive before ordering, as this platform is noted for confirmation in the source material rather than being fully independently verified.
Are both left and right covers included? Yes. The set includes both the left and right mirror covers. No additional purchase is required to cover both sides of the vehicle.
Does installation require modification to the mirror assembly? No. The TREVORA mirror covers are designed as direct OEM replacements using the factory clip mounting system. No modification to the mirror assembly or surrounding bodywork is required. Professional installation is recommended to ensure the factory clips and mounting tabs are not damaged during the removal of the original covers and the fitting of the replacements.
Why is the G45 X3 fitment listed as needing confirmation? The source material lists the G45 X3 as a compatible platform with a note to confirm fitment directly with the distributor rather than listing it as fully independently verified. This means buyers with a G45 X3 should contact Bulletproof Automotive before purchasing to confirm that the mounting clip geometry on their specific vehicle matches the G60/G61 specification these covers are designed around.
What is pre-preg carbon fiber and why does it produce a better finish on a mirror cover? Pre-preg carbon fiber is produced by pre-impregnating the carbon fabric with a precisely controlled resin ratio before the component is formed and cured. On a curved component like a mirror housing, maintaining consistent resin distribution across the full surface is more demanding than on a flat panel; wet-laid carbon applies resin manually, making uniform distribution harder to achieve. Pre-preg construction eliminates this variability, producing a consistent 2×2 twill weave pattern and a uniform high-gloss finish across both covers. At eye level and close range, the difference in surface consistency between pre-preg and wet-laid carbon is directly visible.
What does the UV-resistant clear coat do on a mirror cover? Mirror covers face direct sunlight from above and reflected UV from road surfaces, making them among the more UV-exposed carbon fiber components on a vehicle. Without UV protection, prolonged exposure can cause the clear coat and underlying resin to yellow or degrade, affecting the appearance of the weave over time. The UV-resistant clear coat on these covers protects the carbon surface from this degradation, maintaining the high-gloss finish across long-term use.

About Trevora

Trevora (formerly TRE) is a UK-based automotive aero and styling brand specializing in high-performance pre-preg carbon fiber components. Founded in 2018, Trevora has grown into a globally recognized name in BMW aftermarket parts, known for its OEM+ philosophy, precision engineering, and uncompromising attention to detail. Every component is designed, engineered, and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. By utilizing autoclave-cured pre-preg carbon fiber, Trevora delivers a superior strength-to-weight ratio while eliminating inconsistencies found in traditional wet-lay carbon. All products are backed by Trevora’s industry-leading 5-year warranty.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.