What BMW models is the TREVORA ID-01 spoiler compatible with?

The TREVORA ID-01 carbon fiber rear spoiler is compatible with the 2023 and newer BMW M2 G87 and the 2022 and newer BMW 2 Series G42. It is not confirmed for fitment on other BMW models or earlier generation M2 and 2 Series platforms.

Does the ID-01 spoiler require drilling or permanent modification to install?

No. The TREVORA ID-01 uses pre-applied 3M double-sided tape and an included adhesive promoter for installation. No drilling or permanent modification to the trunk lid is required. The process takes approximately 30 minutes from preparation to completion.

What is pre-preg carbon fiber and why does it matter?

Pre-preg carbon fiber refers to carbon fiber fabric that has been pre-impregnated with a precisely controlled amount of resin before the manufacturing process. This method produces a tighter, more consistent weave pattern and superior strength-to-weight ratio compared to wet layup carbon fiber. It is the same process used in aerospace and motorsport manufacturing, and it results in a surface finish that meets OEM-level quality expectations.

How long does the adhesive need to cure before driving?

A minimum cure time of one hour is recommended after installation before driving the vehicle. Avoiding vehicle movement during this period allows the 3M adhesive and promoter to bond fully, which is critical for a lasting and secure fit.

Does the ID-01 look factory on the G87 M2 and G42 2 Series?

The ID-01 is specifically designed to integrate with the factory body lines of both the G87 M2 and G42 2 Series. Drawing inspiration from BMW's own CS and M Performance styling, the spoiler follows the existing design language of both platforms rather than imposing a separate aesthetic. On the G87 M2 it sharpens the existing aggressive profile; on the G42 2 Series it adds a more performance-oriented character to the rear end.

Where is the TREVORA ID-01 designed and manufactured?

The TREVORA ID-01 is designed and developed in the United Kingdom. It is constructed using high-quality pre-preg carbon fiber with a 2x2 weave pattern, produced to OEM-level fitment and finish standards.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Trevora Carbon ID-01 Rear Spoiler for G87 BMW M2

The ID-01 is built around a sculpted curvature that wraps cleanly along the trunk edge, adding visual width and a more aggressive rear profile without overdoing the transformation. On the G87 M2, where the factory styling is already performance-focused, the spoiler integrates naturally and sharpens the lines the car already has. Construction uses high-quality pre-preg carbon fiber in a 2×2 weave pattern, the same manufacturing process used in aerospace and motorsport applications where consistency, strength, and weight savings all matter. Pre-preg carbon produces a tighter, more uniform weave than wet layup methods, and the result here is a surface finish that holds up to OEM-level expectations across the full panel. The lightweight and high-strength properties of the material mean the spoiler adds presence without adding meaningful mass to the rear of the car.

Carbon Fiber Construction

Constructed using high-quality autoclave-cured pre-preg carbon fiber for superior strength-to-weight ratio. Each component is engineered and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. A UV-resistant clear coat protects the clean weave pattern and maintains finish quality over time, ensuring long-term durability in both daily driving and high-performance environments.

Features

OEM+ fitment – engineered specifically for the listed BMW platform
Pre-preg autoclave-cured carbon fiber construction
UV-resistant clear coat finish
Superior strength-to-weight ratio versus wet-lay carbon
Direct OEM fitment
Plug-and-play installation
Backed by Trevora’s industry-leading 5-year warranty

Included in Box

Rear Spoiler
Required mounting hardware
Installation instructions

Applications

BMW M2: G87 | 2023-present

Frequently Asked Questions

What BMW models is the TREVORA ID-01 spoiler compatible with? The TREVORA ID-01 carbon fiber rear spoiler is compatible with the 2023 and newer BMW M2 G87 and the 2022 and newer BMW 2 Series G42. It is not confirmed for fitment on other BMW models or earlier generation M2 and 2 Series platforms.
Does the ID-01 spoiler require drilling or permanent modification to install? No. The TREVORA ID-01 uses pre-applied 3M double-sided tape and an included adhesive promoter for installation. No drilling or permanent modification to the trunk lid is required. The process takes approximately 30 minutes from preparation to completion.
What is pre-preg carbon fiber and why does it matter? Pre-preg carbon fiber refers to carbon fiber fabric that has been pre-impregnated with a precisely controlled amount of resin before the manufacturing process. This method produces a tighter, more consistent weave pattern and superior strength-to-weight ratio compared to wet layup carbon fiber. It is the same process used in aerospace and motorsport manufacturing, and it results in a surface finish that meets OEM-level quality expectations.
How long does the adhesive need to cure before driving? A minimum cure time of one hour is recommended after installation before driving the vehicle. Avoiding vehicle movement during this period allows the 3M adhesive and promoter to bond fully, which is critical for a lasting and secure fit.
Does the ID-01 look factory on the G87 M2 and G42 2 Series? The ID-01 is specifically designed to integrate with the factory body lines of both the G87 M2 and G42 2 Series. Drawing inspiration from BMW’s own CS and M Performance styling, the spoiler follows the existing design language of both platforms rather than imposing a separate aesthetic. On the G87 M2 it sharpens the existing aggressive profile; on the G42 2 Series it adds a more performance-oriented character to the rear end.
Where is the TREVORA ID-01 designed and manufactured? The TREVORA ID-01 is designed and developed in the United Kingdom. It is constructed using high-quality pre-preg carbon fiber with a 2×2 weave pattern, produced to OEM-level fitment and finish standards.

About Trevora

Trevora (formerly TRE) is a UK-based automotive aero and styling brand specializing in high-performance pre-preg carbon fiber components. Founded in 2018, Trevora has grown into a globally recognized name in BMW aftermarket parts, known for its OEM+ philosophy, precision engineering, and uncompromising attention to detail. Every component is designed, engineered, and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. By utilizing autoclave-cured pre-preg carbon fiber, Trevora delivers a superior strength-to-weight ratio while eliminating inconsistencies found in traditional wet-lay carbon. All products are backed by Trevora’s industry-leading 5-year warranty.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.