What BMW models is the TREVORA ID-01 front splitter compatible with?

The TREVORA ID-01 Pre-preg Carbon Fiber Front Splitter is designed for the 2021 and newer BMW M3 G80 Sedan, the 2022 and newer BMW M3 G81 Touring, the 2021 and newer BMW M4 G82 Coupe, and the 2021 and newer BMW M4 G83 Convertible. Fitment on other BMW models is not confirmed.

How does the ID-01 splitter install on the G8X?

The ID-01 splitter aligns to the factory mounting points on the lower front bumper for OEM-level fitment and alignment. Proper surface preparation of the bumper mounting area is recommended before installation. The source material does not specify whether additional hardware or adhesive is included; contact Bulletproof Automotive to confirm what is included in the box before beginning installation.

What is the difference between the TREVORA ID-01 and PR-1 front splitters for the G8X?

Both the ID-01 and PR-1 are TREVORA pre-preg carbon fiber front splitter options for the G8X M3 and M4 platform, sharing the same OEM+ integration approach and pre-preg construction standard. The ID-01 and PR-1 represent different design programs within the TREVORA lineup with different styling profiles. Contact Bulletproof Automotive for guidance on which option best fits your specific build direction.

What is the UV-resistant clear coat and why does it matter on a carbon splitter?

The UV-resistant clear coat is an additional protective layer applied over the carbon fiber surface that shields the weave and underlying resin from UV degradation over time. Without UV protection, prolonged sunlight exposure can cause the clear coat and underlying resin to yellow or degrade, affecting the appearance of the carbon surface. On a front splitter that faces direct sunlight and road conditions daily, UV resistance is a practical durability consideration that extends the visual life of the component.

What is pre-preg carbon fiber and why is it better than wet-laid carbon on a front splitter?

Pre-preg carbon fiber is produced by pre-impregnating the carbon fabric with a precisely controlled resin ratio before the component is formed and cured. This produces more consistent resin distribution, superior structural integrity, and a more uniform 2x2 twill surface finish than wet-laid carbon, where resin is applied manually and consistency is harder to control. On a front splitter viewed head-on at the center of the car's front face, surface consistency and finish quality are directly visible; pre-preg construction ensures both.

Does the ID-01 splitter work as part of a broader TREVORA aero package for the G8X?

Yes. The ID-01 is part of the TREVORA ID-01 design program, which includes additional exterior components developed with the same design language and construction standard. TREVORA also produces the PR-1 front splitter and PR-1 side skirts for the G8X M3 and M4. Contact Bulletproof Automotive for guidance on building a complete exterior package for your specific vehicle.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Trevora Carbon ID-01 Front Splitter for G8x BMW M3 & M4

The TREVORA ID-01 front splitter is built around the principle that a well-designed front lip should work with the factory bumper geometry rather than impose itself onto it. The ID-01 design adds a more aggressive, performance-informed lower profile to the G8X front bumper, sharpening the front-end appearance and contributing to aerodynamic styling enhancement while remaining proportionally integrated with the surrounding bodywork. The result is a front end that reads as more purposeful from every approach angle without departing from the M3 and M4’s factory visual intent. Construction uses pre-preg carbon fiber with a 2×2 twill weave finish throughout. Pre-preg manufacturing controls resin content precisely during the layup and curing process, delivering superior strength, reduced weight, and more consistent surface quality compared to traditional wet carbon alternatives. The UV-resistant clear coat applied over the carbon surface provides long-term protection against surface degradation from sunlight exposure, keeping the finish quality consistent across the life of the component.

Carbon Fiber Construction

Constructed using high-quality autoclave-cured pre-preg carbon fiber for superior strength-to-weight ratio. Each component is engineered and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. A UV-resistant clear coat protects the clean weave pattern and maintains finish quality over time, ensuring long-term durability in both daily driving and high-performance environments.

Features

OEM+ fitment – engineered specifically for the listed BMW platform
Pre-preg autoclave-cured carbon fiber construction
UV-resistant clear coat finish
Superior strength-to-weight ratio versus wet-lay carbon
Direct OEM fitment
Plug-and-play installation
Backed by Trevora’s industry-leading 5-year warranty

Included in Box

Carbon Fiber ID-01 Front Splitter
Required mounting hardware
Installation instructions

Applications

BMW M3: G80, G81 | 2021-present
BMW M4: G82, G83 | 2021-present

Frequently Asked Questions

What BMW models is the TREVORA ID-01 front splitter compatible with? The TREVORA ID-01 Pre-preg Carbon Fiber Front Splitter is designed for the 2021 and newer BMW M3 G80 Sedan, the 2022 and newer BMW M3 G81 Touring, the 2021 and newer BMW M4 G82 Coupe, and the 2021 and newer BMW M4 G83 Convertible. Fitment on other BMW models is not confirmed.
How does the ID-01 splitter install on the G8X? The ID-01 splitter aligns to the factory mounting points on the lower front bumper for OEM-level fitment and alignment. Proper surface preparation of the bumper mounting area is recommended before installation. The source material does not specify whether additional hardware or adhesive is included; contact Bulletproof Automotive to confirm what is included in the box before beginning installation.
What is the difference between the TREVORA ID-01 and PR-1 front splitters for the G8X? Both the ID-01 and PR-1 are TREVORA pre-preg carbon fiber front splitter options for the G8X M3 and M4 platform, sharing the same OEM+ integration approach and pre-preg construction standard. The ID-01 and PR-1 represent different design programs within the TREVORA lineup with different styling profiles. Contact Bulletproof Automotive for guidance on which option best fits your specific build direction.
What is the UV-resistant clear coat and why does it matter on a carbon splitter? The UV-resistant clear coat is an additional protective layer applied over the carbon fiber surface that shields the weave and underlying resin from UV degradation over time. Without UV protection, prolonged sunlight exposure can cause the clear coat and underlying resin to yellow or degrade, affecting the appearance of the carbon surface. On a front splitter that faces direct sunlight and road conditions daily, UV resistance is a practical durability consideration that extends the visual life of the component.
What is pre-preg carbon fiber and why is it better than wet-laid carbon on a front splitter? Pre-preg carbon fiber is produced by pre-impregnating the carbon fabric with a precisely controlled resin ratio before the component is formed and cured. This produces more consistent resin distribution, superior structural integrity, and a more uniform 2×2 twill surface finish than wet-laid carbon, where resin is applied manually and consistency is harder to control. On a front splitter viewed head-on at the center of the car’s front face, surface consistency and finish quality are directly visible; pre-preg construction ensures both.
Does the ID-01 splitter work as part of a broader TREVORA aero package for the G8X? Yes. The ID-01 is part of the TREVORA ID-01 design program, which includes additional exterior components developed with the same design language and construction standard. TREVORA also produces the PR-1 front splitter and PR-1 side skirts for the G8X M3 and M4. Contact Bulletproof Automotive for guidance on building a complete exterior package for your specific vehicle.

About Trevora

Trevora (formerly TRE) is a UK-based automotive aero and styling brand specializing in high-performance pre-preg carbon fiber components. Founded in 2018, Trevora has grown into a globally recognized name in BMW aftermarket parts, known for its OEM+ philosophy, precision engineering, and uncompromising attention to detail. Every component is designed, engineered, and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. By utilizing autoclave-cured pre-preg carbon fiber, Trevora delivers a superior strength-to-weight ratio while eliminating inconsistencies found in traditional wet-lay carbon. All products are backed by Trevora’s industry-leading 5-year warranty.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.