What BMW models is the TREVORA front splitter with winglets compatible with?

The TREVORA carbon fiber front splitter with winglets is designed specifically for the 2023 and newer BMW M2 G87. It is not confirmed for fitment on earlier M2 generations or other BMW models.

What is the advantage of the 3-piece modular design?

The 3-piece construction offers three practical benefits over a single-piece splitter. It is easier to transport and handle during installation, allows for more precise alignment of each section to the factory bumper, and makes individual section replacement possible. If one part of the splitter is damaged, only that section needs to be replaced rather than the entire assembly, which reduces repair costs significantly over the life of the product.

Are replacement sections available if part of the splitter is damaged?

Yes. TREVORA offers individual replacement sections for this splitter system. In the event of damage to one section, contact Bulletproof Automotive to source the specific piece rather than replacing the full assembly.

Does the splitter require drilling or permanent modification to the factory bumper?

No. The TREVORA G87 M2 front splitter uses pre-applied 3M double-sided tape and an included adhesive promoter for installation. No drilling or permanent modification to the factory front bumper is required.

What is pre-preg carbon fiber and how does it compare to standard carbon?

Pre-preg carbon fiber is produced by pre-impregnating the carbon fiber fabric with a precisely measured amount of resin before the component is formed and cured. This process results in a more consistent weave pattern, better structural integrity, and a higher-quality surface finish than wet layup carbon fiber, where resin is applied manually during the layup process. Pre-preg is the method used in aerospace and motorsport manufacturing for these exact reasons.

How does the winglet configuration change the look of the G87 M2?

The winglets extend horizontally alongside the main splitter body, reinforcing the wide stance of the G87 M2's front end and adding a motorsport-inspired detail that sharpens the overall front profile. The design draws from the factory contours of the bumper rather than imposing a separate shape, keeping the result in OEM+ territory; more aggressive than stock, but cohesive with the rest of the car.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Trevora Carbon Front Splitter with Winglets for G87 BMW M2

The front splitter is the most visually impactful aero component on the G87 M2’s front end, and the TREVORA approach here is to maximize that impact while keeping the overall execution clean and cohesive. The winglet configuration runs alongside the main splitter body, extending the horizontal visual line of the front bumper and reinforcing the wide, planted stance the M2 already projects from the factory. The result sits comfortably in OEM+ territory; more purposeful than stock, without crossing into the kind of overworked appearance that pulls the car away from its original intent. Construction uses premium pre-preg 2×2 twill carbon fiber throughout, the same manufacturing method used in aerospace and motorsport applications where a controlled resin ratio and consistent weave are non-negotiable. Pre-preg carbon produces a tighter, more uniform surface than wet layup alternatives, and on a component as front-and-center as a splitter, that consistency is visible from across the room. The lightweight and high-strength properties of the material mean the system adds presence without adding meaningful weight to the front of the car. One of the more practical aspects of this splitter is the 3-piece modular construction. Rather than a single bonded assembly, the system breaks into three separate sections that can be transported more easily, installed with greater precision, and, critically, replaced individually if one section is damaged. TREVORA offers replacement sections for exactly this reason, which keeps long-term ownership costs lower than a one-piece design where a single curb strike or track incident requires replacing the entire assembly

Carbon Fiber Construction

Constructed using high-quality autoclave-cured pre-preg carbon fiber for superior strength-to-weight ratio. Each component is engineered and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. A UV-resistant clear coat protects the clean weave pattern and maintains finish quality over time, ensuring long-term durability in both daily driving and high-performance environments.

Features

OEM+ fitment – engineered specifically for the listed BMW platform
Pre-preg autoclave-cured carbon fiber construction
UV-resistant clear coat finish
Superior strength-to-weight ratio versus wet-lay carbon
Direct OEM fitment
Plug-and-play installation
Backed by Trevora’s industry-leading 5-year warranty

Included in Box

Front Splitter with Winglets
Required mounting hardware
Installation instructions

Applications

BMW M2: G87 | 2023-present

Frequently Asked Questions

What BMW models is the TREVORA front splitter with winglets compatible with? The TREVORA carbon fiber front splitter with winglets is designed specifically for the 2023 and newer BMW M2 G87. It is not confirmed for fitment on earlier M2 generations or other BMW models.
What is the advantage of the 3-piece modular design? The 3-piece construction offers three practical benefits over a single-piece splitter. It is easier to transport and handle during installation, allows for more precise alignment of each section to the factory bumper, and, most importantly, makes individual section replacement possible. If one part of the splitter is damaged, only that section needs to be replaced rather than the entire assembly, which reduces repair costs significantly over the life of the product.
Are replacement sections available if part of the splitter is damaged? Yes. TREVORA offers individual replacement sections for this splitter system. In the event of damage to one section, contact Bulletproof Automotive to source the specific piece rather than replacing the full assembly.
Does the splitter require drilling or permanent modification to the factory bumper? No. The TREVORA G87 M2 front splitter uses pre-applied 3M double-sided tape and an included adhesive promoter for installation. No drilling or permanent modification to the factory front bumper is required.
What is pre-preg carbon fiber and how does it compare to standard carbon? Pre-preg carbon fiber is produced by pre-impregnating the carbon fiber fabric with a precisely measured amount of resin before the component is formed and cured. This process results in a more consistent weave pattern, better structural integrity, and a higher-quality surface finish than wet layup carbon fiber, where resin is applied manually during the layup process. Pre-preg is the method used in aerospace and motorsport manufacturing for these exact reasons.
How does the winglet configuration change the look of the G87 M2? The winglets extend horizontally alongside the main splitter body, reinforcing the wide stance of the G87 M2’s front end and adding a motorsport-inspired detail that sharpens the overall front profile. The design draws from the factory contours of the bumper rather than imposing a separate shape, keeping the result in OEM+ territory; more aggressive than stock, but cohesive with the rest of the car.

About Trevora

Trevora (formerly TRE) is a UK-based automotive aero and styling brand specializing in high-performance pre-preg carbon fiber components. Founded in 2018, Trevora has grown into a globally recognized name in BMW aftermarket parts, known for its OEM+ philosophy, precision engineering, and uncompromising attention to detail. Every component is designed, engineered, and prototyped in-house using advanced CAD modeling and 3D scanning to achieve precise factory-plus fitment. By utilizing autoclave-cured pre-preg carbon fiber, Trevora delivers a superior strength-to-weight ratio while eliminating inconsistencies found in traditional wet-lay carbon. All products are backed by Trevora’s industry-leading 5-year warranty.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.