What's included in the Spoon Suspension Bush Set?

Twenty bushings total, covering the full suspension rather than one location. Where Spoon's individual sets address specific points, such as the rear control arm, rear lower control arm, lower damper mounts or front compliance bushing, this kit bundles all of it into a single complete order.

Does this fit the AP1 as well?

No. This 20-piece set is specific to the AP2, model years 2004-2009. Spoon offers a separate part number for the earlier AP1, covering 2000-2003, so confirm your exact model year before ordering.

Can I buy the individual bushing sets instead?

Yes, if you only need to address specific locations. Spoon sells the rear control arm, rear lower control arm, lower damper and front compliance bushings as separate smaller sets, so a partial refresh is possible without buying the complete 20-piece kit.

Is this a big job to install?

Yes, more so than a single 2 or 4-piece set. Twenty bushings across multiple suspension locations is a substantial suspension service, and each bushing typically needs to be pressed out and in at its location. Professional installation is strongly recommended for a kit this size.

Will this make the ride harsher?

Stiffer bushings transmit slightly more road feel through to the chassis compared with the factory rubber pieces, which is the tradeoff across the whole car for the more direct suspension response a complete bushing refresh delivers.

Why does the part number start with 51359-AP1 if this is the AP2 version?

The base part family (51359-AP1) is shared, with a suffix differentiating the two applications; this listing's specific part number is 51359-AP1-020 for the AP2, while the AP1 version uses a different suffix. Confirm the exact suffix on your order matches your chassis.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Spoon Suspension Bushing Set for AP2 Honda S2000

The Spoon Suspension Bush Set is the complete bushing replacement for the S2000 AP2, bundling every stiffer Spoon bushing into one 20-piece kit rather than assembling a full suspension refresh from several separate sets. A worn or overly compliant factory bushing lets suspension components shift slightly under load at each mounting point, and that small amount of give at every location adds up to noticeably vaguer handling. Replacing the full set at once gives a consistent, direct suspension feel across the whole car rather than upgrading one location at a time.

Features

Direct replacement for the factory bushings
Stiffer bushing material for more direct suspension response
Reduces play in suspension components across the full suspension
Complete set: 20 pieces total

Applications

Honda S2000: AP2 | 2004-2009

Notes

This is the AP2 version of Spoon’s complete suspension bush set; a separate part number covers the AP1, model years 2000-2003
Complete set of 20 bushings, covering multiple suspension locations in one kit
Professional installation strongly recommended given the scope of this kit. Suspension bushing replacement typically requires pressing old bushings out and new ones in at each location; a shop with the correct press tooling will get a cleaner result across a full set like this than a DIY install without it.

Frequently Asked Questions

What’s included in the Spoon Suspension Bush Set? Twenty bushings total, covering the full suspension rather than one location. Where Spoon’s individual sets address specific points, such as the rear control arm, rear lower control arm, lower damper mounts or front compliance bushing, this kit bundles all of it into a single complete order.
Does this fit the AP1 as well? No. This 20-piece set is specific to the AP2, model years 2004-2009. Spoon offers a separate part number for the earlier AP1, covering 2000-2003, so confirm your exact model year before ordering.
Can I buy the individual bushing sets instead? Yes, if you only need to address specific locations. Spoon sells the rear control arm, rear lower control arm, lower damper and front compliance bushings as separate smaller sets, so a partial refresh is possible without buying the complete 20-piece kit.
Is this a big job to install? Yes, more so than a single 2 or 4-piece set. Twenty bushings across multiple suspension locations is a substantial suspension service, and each bushing typically needs to be pressed out and in at its location. Professional installation is strongly recommended for a kit this size.
Will this make the ride harsher? Stiffer bushings transmit slightly more road feel through to the chassis compared with the factory rubber pieces, which is the tradeoff across the whole car for the more direct suspension response a complete bushing refresh delivers.
Why does the part number start with 51359-AP1 if this is the AP2 version? The base part family (51359-AP1) is shared, with a suffix differentiating the two applications; this listing’s specific part number is 51359-AP1-020 for the AP2, while the AP1 version uses a different suffix. Confirm the exact suffix on your order matches your chassis.

About Spoon Sports

Spoon Sports is a Japanese tuning and motorsport company founded by former Honda works driver Tatsuru Ichishima, closely associated with Honda performance development since the 1980s. The brand is known for race-proven parts developed through its own circuit testing and competition programs, spanning engine components, suspension, aerodynamics and full vehicle builds across the Honda lineup. Spoon’s products carry a reputation for functional, track-validated engineering rather than styling alone, reflecting the company’s roots in actual racing rather than aftermarket cosmetics.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.