Where do the Side Intake Covers for McLaren Artura fit?

RYFT makes the Side Intake Covers for McLaren Artura cars for the side intakes that sit behind the sculpted door channels on each flank. Bulletproof Automotive confirms fitment details with RYFT before ordering, including how the covers meet the factory intake openings.

Do the intake covers suit the Artura Spider?

RYFT names only the McLaren Artura. The Spider received new buttresses and an aerothermal system with four separate ducting paths, so the area around its side intakes is not guaranteed to match the coupe, and Spider owners should wait for RYFT to list the open car.

Do the Artura intake covers show the carbon weave?

Yes. RYFT lists two by two twill for its Artura parts, and Function Factory Performance describes this product as two by two twill carbon fiber. The covers are shown with the weave visible under a clear finish, which makes them a dark accent behind each door.

How should carbon intake covers be cleaned?

Intakes gather leaves and grit, so check them after drives in poor weather. Clean the carbon with a pH neutral shampoo and a soft brush, clear debris from inside the openings with compressed air, and use a ceramic coating to make later washes quicker.

Which RYFT parts pair with the intake covers?

The RYFT fender vent inserts sit at the front of the same flank and make the most natural pairing. Owners after the full side treatment add the RYFT side skirts below, which tie the Side Intake Covers for McLaren Artura to the splitter and diffuser at either end of the car.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

RYFT Carbon Fiber Side Intake Covers for McLaren Artura

RYFT’s carbon fiber side intake covers for McLaren Artura cars dress the intakes behind the doors, the openings McLaren feeds with clean air through channels sculpted into the door skins. These intakes belong to the cooling layout of the hybrid powertrain, and they are among the most shaped openings on the car, so carbon there draws attention to how McLaren built the body around airflow. We would pair them with the RYFT fender vent inserts, which put carbon at the start of the same airflow path.

Design

McLaren says the Artura’s buttresses and hidden inlet ducts in the doors channel air over, under and through the body, and launch coverage describes a duct behind the closed doors that carries air to the bottom of the high-temperature radiator. The side intakes are the visible end of that system. RYFT’s covers bring 2×2 twill carbon to them, a weave Function Factory Performance also lists for this part.

Features

2×2 twill carbon fiber, as RYFT and its dealer list it
Made for the side intakes fed by the door channels
Adds carbon at the rear of the flank
Pairs with the RYFT fender vent inserts

Applications

McLaren Artura: MCLA | 2023-present | 3.0L M630 twin-turbo V6 plug-in hybrid

Notes

Sold as a set
RYFT lists these side intake covers for McLaren Artura coupes by model name only, and the Artura Spider is not named
Ahead of them on the flank sit the RYFT Carbon Fiber Fender Vent Inserts for McLaren Artura
Discover the RYFT Artura parts

Frequently Asked Questions

Where do the Side Intake Covers for McLaren Artura fit? RYFT makes the Side Intake Covers for McLaren Artura cars for the side intakes that sit behind the sculpted door channels on each flank. Bulletproof Automotive confirms fitment details with RYFT before ordering, including how the covers meet the factory intake openings.
Do the intake covers suit the Artura Spider? RYFT names only the McLaren Artura. The Spider received new buttresses and an aerothermal system with four separate ducting paths, so the area around its side intakes is not guaranteed to match the coupe, and Spider owners should wait for RYFT to list the open car.
Do the Artura intake covers show the carbon weave? Yes. RYFT lists two by two twill for its Artura parts, and Function Factory Performance describes this product as two by two twill carbon fiber. The covers are shown with the weave visible under a clear finish, which makes them a dark accent behind each door.
How should carbon intake covers be cleaned? Intakes gather leaves and grit, so check them after drives in poor weather. Clean the carbon with a pH neutral shampoo and a soft brush, clear debris from inside the openings with compressed air, and use a ceramic coating to make later washes quicker.
Which RYFT parts pair with the intake covers? The RYFT fender vent inserts sit at the front of the same flank and make the most natural pairing. Owners after the full side treatment add the RYFT side skirts below, which tie the Side Intake Covers for McLaren Artura to the splitter and diffuser at either end of the car.

About RYFT

RYFT is an American performance house building titanium exhausts, carbon fiber exterior parts and spring kits for Ferrari, Lamborghini, McLaren, Porsche, Audi and Chevrolet performance vehicles. Its titanium exhausts are made by hand around RYFT’s proprietary velocity loops, its carbon fiber exterior parts are made in exposed weave for specific models, and its spring kits are developed with Moton Suspension. The HYPR Titanium system for the Lamborghini Revuelto is designed, tested and manufactured in the USA with 3D-printed titanium collectors and tips.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

RYFT Carbon Fiber Side Intake Covers for McLaren Artura [29-20-1031]

Guaranteed Safe Checkout

RYFT Carbon Fiber Side Intake Covers for McLaren Artura

Design

Features

Applications

Notes

Frequently Asked Questions

About RYFT

Reviews