Do the Front Lower Splitters for Lamborghini Urus fit the Urus S or Urus SE?

No. RYFT lists the Front Lower Splitters for Lamborghini Urus models only, which Bulletproof Automotive applies to the original 2019 to 2022 Urus. The Urus S arrived for 2023 with new front and rear bumpers and the 2025 Urus SE was restyled again, so neither model is covered by this RYFT part.

How are the RYFT Urus lower splitters sold?

RYFT sells part number 27-20-1001 as a two piece set, and both pieces arrive under this single listing. Each splitter is carbon fiber in a two by two twill weave, the same weave RYFT uses across its Urus range. Bulletproof Automotive confirms fitment details with RYFT before ordering so the set matches the bumper on your SUV.

Is the carbon on the splitters left exposed?

Yes. RYFT shows the splitters in carbon fiber with the two by two twill weave visible, and it presents a weave sample alongside the product. On a painted Urus the result is a dark, textured band at the base of the bumper that ties in with any other RYFT carbon pieces fitted to the same vehicle.

How should low carbon pieces on a Urus be protected?

Low front pieces take stone chips and road film first, so clear paint protection film on the leading edge is worth considering from day one. Wash with a pH neutral shampoo, dry with a soft towel, and add a UV stable ceramic coating to keep the clear finish from fading. Take steep driveways and ramps at an angle.

Should a specialist fit the splitters?

Yes. The splitters attach low on a bumper that is close to the ground, and the vehicle needs to be raised safely to reach them without marking the paint. A shop that already works on Lamborghini bodywork will set both pieces evenly side to side and check clearance before the Urus goes back on the road.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

RYFT Carbon Fiber Front Lower Splitters for Lamborghini Urus

RYFT’s Front Lower Splitters for Lamborghini Urus are a two-piece carbon fiber set for the lowest edge of the front bumper on the original Urus, the twin-turbo V8 SUV sold in the US for model years 2019 to 2022. They change very little of the shape and a good deal of the impression, putting visible 2×2 twill right where the bumper meets the road. We would steer an owner here who wants a carbon detail up front but is not ready for the larger RYFT front lip.

Design

Lamborghini revealed the Urus at Sant’Agata Bolognese on 4 December 2017 and gave it the two-thirds body, one-third glass proportion of its mid-engine models, which puts a lot of visual weight into the bodywork below the headlights. RYFT built its Urus program after its Performante range, and these splitters are among the smallest of the 16 handcrafted carbon pieces it lists for the Urus. Each blade is laid up in the same 2×2 twill as the rest of that package.

Features

Two-piece carbon fiber set laid up in 2×2 twill
Sits along the lowest edge of the original Urus front bumper
Shares its weave with every carbon part in the RYFT Urus package
An affordable starting point for a carbon front end

What’s Included

Front lower splitter (x2)

Applications

Lamborghini Urus: 2019-2022 | 4.0L twin-turbo V8

Notes

RYFT lists the Front Lower Splitters for Lamborghini Urus models and names neither the Urus S, Urus SE nor the Urus Performante
RYFT does not publish a weight or mounting method for the splitters
For the middle of the bumper, RYFT also offers the RYFT Carbon Fiber Center Chin for Lamborghini Urus
See the whole RYFT Urus carbon range, checking that each part names your model

Frequently Asked Questions

Do the Front Lower Splitters for Lamborghini Urus fit the Urus S or Urus SE? No. RYFT lists the Front Lower Splitters for Lamborghini Urus models only, which Bulletproof Automotive applies to the original 2019 to 2022 Urus. The Urus S arrived for 2023 with new front and rear bumpers and the 2025 Urus SE was restyled again, so neither model is covered by this RYFT part.
How are the RYFT Urus lower splitters sold? RYFT sells part number 27-20-1001 as a two piece set, and both pieces arrive under this single listing. Each splitter is carbon fiber in a two by two twill weave, the same weave RYFT uses across its Urus range. Bulletproof Automotive confirms fitment details with RYFT before ordering so the set matches the bumper on your SUV.
Is the carbon on the splitters left exposed? Yes. RYFT shows the splitters in carbon fiber with the two by two twill weave visible, and it presents a weave sample alongside the product. On a painted Urus the result is a dark, textured band at the base of the bumper that ties in with any other RYFT carbon pieces fitted to the same vehicle.
How should low carbon pieces on a Urus be protected? Low front pieces take stone chips and road film first, so clear paint protection film on the leading edge is worth considering from day one. Wash with a pH neutral shampoo, dry with a soft towel, and add a UV stable ceramic coating to keep the clear finish from fading. Take steep driveways and ramps at an angle.
Should a specialist fit the splitters? Yes. The splitters attach low on a bumper that is close to the ground, and the vehicle needs to be raised safely to reach them without marking the paint. A shop that already works on Lamborghini bodywork will set both pieces evenly side to side and check clearance before the Urus goes back on the road.

About RYFT

RYFT is an American performance house building titanium exhausts, carbon fiber exterior parts and spring kits for Ferrari, Lamborghini, McLaren, Porsche, Audi and Chevrolet performance vehicles. Its titanium exhausts are made by hand around RYFT’s proprietary velocity loops, its carbon fiber exterior parts are made in exposed weave for specific models, and its spring kits are developed with Moton Suspension. The HYPR Titanium system for the Lamborghini Revuelto is designed, tested and manufactured in the USA with 3D-printed titanium collectors and tips.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

RYFT Carbon Fiber Front Lower Splitters for Lamborghini Urus [27-20-1001]

Guaranteed Safe Checkout

RYFT Carbon Fiber Front Lower Splitters for Lamborghini Urus

Design

Features

What’s Included

Applications

Notes

Frequently Asked Questions

About RYFT

Reviews