Is the Öhlins Street Tuned coilover suspension for the Tesla Model 3 and Model Y compatible with both RWD and AWD variants?

Yes. The Öhlins Street Tuned coilover system fits both the Tesla Model 3 (2017 and newer) and Tesla Model Y (2020 and newer), covering RWD and AWD configurations across both models.

How is the Öhlins Street Tuned system different from the Road & Track line?

The Street Tuned system is developed directly from the Road & Track line but is tuned with a softer setup that prioritizes maximum ride comfort and increased stability for daily driving. It uses the same DFV technology and monotube construction as the Road & Track series, with valving focused on everyday comfort rather than track-oriented performance.

What does the DFV (dual flow valve) technology do, and why does it matter for a daily driver?

The DFV allows damper fluid to flow smoothly in both compression and rebound, enabling the wheel and tire to return to the road surface quickly after a bump. On rough pavement, this means better grip and a smoother ride compared to conventional coilovers. An internal needle bleed valve also expands with heat to compensate for changes in fluid viscosity, keeping damping performance consistent regardless of temperature.

How much can I lower the Tesla Model 3 or Model Y with this kit?

Both the front and rear have an adjustment range of approximately 0-35 mm of lowering. Öhlins' height adjustment method leaves the spring seat in its optimal position while the lower flange rotates on the threaded body, preserving the intended handling characteristics at any ride height setting.

What is included with the Öhlins Street Tuned kit?

The kit includes the full coilover set with springs and mounting hardware, a C-spanner wrench for spring preload adjustment, an Öhlins owners manual and mounting instructions, and an Öhlins sticker set.

Are the dampers rebuildable, and what warranty does Öhlins offer?

Yes. All Öhlins Street Tuned dampers are fully rebuildable, allowing them to be serviced and revalved over time. The system is backed by a two-year limited warranty worldwide, and each shock absorber is corrosion salt spray tested to ISO 9227 standards before leaving the factory.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Öhlins Street Tuned Coilover Suspension System for Tesla Model 3 / Y

For over four decades, Öhlins has maintained a rich heritage of high-end racing involvement and cutting-edge advancements in suspension technology, now brought to street vehicles across the globe. Öhlins has been unwavering in its goal from the very beginning: to deliver unmatched road performance while preserving ride comfort for everyday use, marking the end of the era of compromises. Each of Öhlins’ shock absorbers undergoes extensive corrosion testing following (ISO 9227) standards, ensuring durability and reliability. This commitment to quality is underscored by a 2-year limited warranty available worldwide on all Öhlins products.

Road & Track Systems

Öhlins represents the pinnacle of innovation and high-end performance enhancements for vehicles. A prime illustration of this commitment is their Road & Track suspension range. In alignment with their core philosophy, these products are designed to bring the exhilaration of the racetrack to everyday street driving. Öhlins selects only the finest materials, ensuring impeccable quality alongside their patented Dual Flow Valve (DFV) technology, which guarantees optimal traction without sacrificing comfort. The era of compromise has come to an end. Experience the unmatched performance and comfort of Öhlins for yourself. The Öhlins Road & Track coilover kit is engineered with a softer setup, prioritizing maximum comfort and enhanced stability for an unparalleled driving experience.

The Features of DFV Technology

What is DFV? It refers to Dual Flow Valve technology, a feature that distinguishes Öhlins from its competitors. This innovative technology is exclusive to Öhlins’ road and track products.
The Dual Flow Valve (DFV) technology ensures consistent performance during both rebound and compression by allowing the damper fluid to flow smoothly in both directions. This functionality enables the wheel and tire to swiftly return to their optimal position on the road, ensuring maximum grip and traction. Öhlins’ latest Road & Track (R&T) series incorporates DFV technology across all its models, offering the ideal solution for enthusiasts seeking both comfort and agility in a single upgrade.
Benefits of DFV – The DFV technology enables quicker and smoother opening over minor road imperfections, resulting in a ride comfort that closely resembles that of an OEM strut rather than a traditional coilover setup. On uneven terrains, the adaptability of the Road & Track (R&T) units allows vehicles to navigate bumps and potholes with ease, ensuring stability and control are maintained. This ensures traction is consistently optimized.
Thermal Expansion – Dampers heating up is a certainty, as friction generated by the piston’s movement within the damper produces heat. While stopping heat generation is impossible, Öhlins has developed a method to manage it, setting them apart from competitors. As temperatures rise, the viscosity of the damper fluid may change, which can affect the vehicle’s handling. Öhlins’ innovative needle bleed valve is designed to expand with heat, reducing the fluid’s flow space and thus ensuring a consistent damping rate. The remarkable part? This process is seamless to the driver. The consistent response of the vehicle, regardless of laps or turns, allows drivers to focus solely on their braking points and apexes, trusting Öhlins technology to handle the damping with precision.

Features

Designed for maximum drive comfort and increased stability
Patented DFV technology (Dual Flow Valve)
Individual height adjustment
Rebuildable
Corrosion salt spray tested (ISO 9227)
2 year warranty

Specifications

Front
- McPherson strut
- Compression and rebound damping with one adjuster
- Spring preload adjuster
- Approximately 0-10mm lower than standard with recommended setup
- 70N/mm spring rate
- Uses original top mounts
Rear
- Conventional shock absorber
- Compression and rebound damping with one adjuster
- Spring preload adjuster
- Approximately 0-10mm lower than standard with recommended setup
- 80N/mm spring rate
- Uses original top mounts

What’s Included

Coilover kit including springs and mounting parts
C-spanner wrench (for spring preload adjustment)
Owners manual and mounting instruction
Sticker set

Applications

Tesla Model 3: 2017+
Tesla Model Y: 2020+

Notes

Image(s) may differ from actual product

Frequently Asked Questions

Is the Öhlins Street Tuned coilover suspension for the Tesla Model 3 and Model Y compatible with both RWD and AWD variants? Yes. The Öhlins Street Tuned coilover system fits both the Tesla Model 3 (2017 and newer) and Tesla Model Y (2020 and newer), covering RWD and AWD configurations across both models.
How is the Öhlins Street Tuned system different from the Road & Track line? The Street Tuned system is developed directly from the Road & Track line but is tuned with a softer setup that prioritizes maximum ride comfort and increased stability for daily driving. It uses the same DFV technology and monotube construction as the Road & Track series, with valving focused on everyday comfort rather than track-oriented performance.
What does the DFV (Dual Flow Valve) technology do, and why does it matter for a daily driver? The DFV allows damper fluid to flow smoothly in both compression and rebound, enabling the wheel and tire to return to the road surface quickly after a bump. On rough pavement, this means better grip and a smoother ride compared to conventional coilovers. An internal needle bleed valve also expands with heat to compensate for changes in fluid viscosity, keeping damping performance consistent regardless of temperature.
How much can I lower the Tesla Model 3 or Model Y with this kit? Both the front and rear have an adjustment range of approximately 0-35mm of lowering. Öhlins’ height adjustment method leaves the spring seat in its optimal position while the lower flange rotates on the threaded body, preserving the intended handling characteristics at any ride height setting.
What is included with the Öhlins Street Tuned kit? The kit includes the full coilover set with springs and mounting hardware, a C-spanner wrench for spring preload adjustment, an Öhlins owners manual and mounting instructions, and an Öhlins sticker set.
Are the dampers rebuildable, and what warranty does Öhlins offer? Yes. All Öhlins Street Tuned dampers are fully rebuildable, allowing them to be serviced and revalved over time. The system is backed by a two-year limited warranty worldwide, and each shock absorber is corrosion salt spray tested to (ISO 9227) standards before leaving the factory.

About Ohlins

For nearly 50 years, Öhlins has been a cornerstone of the motorsport, motorcycle, and automotive industries, guided by a clear mission to deliver uncompromising quality in products, service, and support from the MotoGP circuit to grassroots racing events in over 50 distributing countries. Trusted by aftermarket customers, OEM partners, and professional racing teams, the company designs and manufactures advanced suspension systems that push the limits of precision, control, and reliability. Rooted in a rich motorsport heritage and driven by a passion for innovation, Öhlins extends beyond its racing DNA to inspire riders and drivers everywhere with high-performance solutions that are rigorously developed, tested, and refined to transform vehicle dynamics. Through close collaboration with leading manufacturers and racing teams, the company sets the benchmark for suspension performance, integrating insights directly into its shock absorbers, front forks, steering dampers, and advanced electronic suspension systems for both OEM and aftermarket applications. Its products deliver track-proven performance with minimal modification, enabling professional competitors, enthusiasts, and everyday drivers to achieve greater comfort, control, and confidence.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Ohlins Street Tuned Coilover Suspension System for Tesla Model 3 / Y [TES MX00S1]

Guaranteed Safe Checkout

Öhlins Street Tuned Coilover Suspension System for Tesla Model 3 / Y

Road & Track Systems

The Features of DFV Technology

Features

Specifications

What’s Included

Applications

Notes

Frequently Asked Questions

About Ohlins

Reviews