Which cars do the Coilovers for E8X BMW 1 Series fit?

Öhlins lists kit BMS MI01S1 for the E81, E82, E87 and E88 1 Series, including the 128i and 135i, and the same kit fits the E9X 3 Series. The 1M uses a different Öhlins kit.

What damping setting should I use?

Öhlins suggests 10 to 20 clicks for street driving, 5 to 10 for winding roads and 2 to 7 for track use. Each click changes compression and rebound together through the DFV valve.

How low does the car sit on the Öhlins kit?

On the Öhlins recommended settings the car sits about 10 mm lower than stock at both ends, and Öhlins gives a lowering range of roughly 5 to 20 mm. Ride height is set with the spring preload adjusters.

How is the rear damping adjusted?

The rear adjuster is on a control wire, and the Öhlins mounting instructions route its knob through a 10 mm hole in the rear side panel, so the rear can be set without reaching under the car.

Does the kit reuse the factory top mounts?

Yes. The front struts and rear shock absorbers both use the original BMW top mounts. A four-wheel alignment is recommended after fitting.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Öhlins DFV Road & Track Coilovers for E8X BMW 1 Series

Öhlins’ DFV Road & Track Coilovers for E8X BMW 1 Series models replace all four dampers and springs with Öhlins kit BMS MI01S1, which Öhlins builds for the E8X 1 Series and the E9X 3 Series. It covers the E82 coupe and E88 convertible, including the 128i and 135i, and the E81 and E87 hatchbacks. A gold knob on each damper switches between street and track settings in seconds, and on Öhlins’ recommended setup the car sits about 10 mm lower than stock. It suits the owner who drives to the circuit and home again; a car trailered to every event wants a dedicated track damper.

Design and Performance

The Dual Flow Valve lets one adjuster shift low and high speed compression and rebound together, so road and track settings are a knob turn apart rather than a session of separate changes. The front uses upside-down monotube McPherson struts and the rear uses monotube shock absorbers, both with spring preload adjusters for ride height. The rear damping adjuster sits on a control wire with its knob routed through the rear side panel, so the rear can be adjusted without reaching under the car. Both ends keep the original BMW top mounts.

Features

DFV (Dual Flow Valve) damping technology
Single 25-click knob adjusts compression and rebound together
Upside-down monotube McPherson struts up front
Monotube rear shock absorbers
Remote rear adjustment knob on a control wire
Spring preload adjusters front and rear
Uses the original top mounts front and rear
Rebuildable dampers for service and custom valving
Salt spray corrosion tested to ISO 9227
TÜV approved
2-year Öhlins warranty

Specifications

Ride height at recommended setup: approximately 10 mm below stock, front and rear
Lowering range: approximately 5-20 mm, front and rear
Front spring rate: 400 lb/in (70 N/mm)
Rear spring rate: 685 lb/in (120 N/mm)
Damping adjustment: 25 clicks, compression and rebound combined

What’s Included

Front struts, left and right (x2)
Front springs (x2)
Rear shock absorbers (x2)
Rear springs (x2)
Rear height adjusters, control wires and adjustment knobs (x2)
Spring seats, spacers, dust boots, lock nuts and mounting hardware
C-spanners (x2), Allen key and Öhlins sticker kit
Owner’s manual

Applications

BMW 1 Series coupe and convertible: E82 / E88 | 2008-2013
BMW 1 Series hatchback: E81 / E87 | 2004-2012
BMW 3 Series sedan and Touring: E90 / E91 | 2006-2012
BMW 3 Series coupe and convertible: E92 / E93 | 2007-2013

Notes

The Öhlins mounting instructions call for drilling a 10 mm hole in the rear side panel for the adjuster control wire, and the original brake hose brackets and stabilizer links transfer to the Öhlins struts
Not for the 1M, which uses the Öhlins kit for the E9X M3 and E82 1M or the Öhlins kit for the E82 BMW 1M
Öhlins sells the same kit for the E9X BMW 3 Series, listed separately
Professional installation and a four-wheel alignment are recommended when fitting the Coilovers for E8X BMW 1 Series models

Frequently Asked Questions

Which cars do the Coilovers for E8X BMW 1 Series fit? Öhlins lists kit BMS MI01S1 for the E81, E82, E87 and E88 1 Series, including the 128i and 135i, and the same kit fits the E9X 3 Series. The 1M uses a different Öhlins kit.
What damping setting should I use? Öhlins suggests 10 to 20 clicks for street driving, 5 to 10 for winding roads and 2 to 7 for track use. Each click changes compression and rebound together through the DFV valve.
How low does the car sit on the Öhlins kit? On the Öhlins recommended settings the car sits about 10 mm lower than stock at both ends, and Öhlins gives a lowering range of roughly 5 to 20 mm. Ride height is set with the spring preload adjusters.
How is the rear damping adjusted? The rear adjuster is on a control wire, and the Öhlins mounting instructions route its knob through a 10 mm hole in the rear side panel, so the rear can be set without reaching under the car.
Does the kit reuse the factory top mounts? Yes. The front struts and rear shock absorbers both use the original BMW top mounts. A four-wheel alignment is recommended after fitting.

About Öhlins

Öhlins was founded in 1976 by former motocross racer Kenth Öhlin and is based in Upplands Väsby, Sweden, where it develops dampers for motorcycles, cars and motorsport. Its suspension has won more than 300 world championship titles across motorcycle and car racing, its CES electronic damping went into series production on the Volvo S60R in 2003, and the company has been part of the Brembo group since 2025.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Öhlins DFV Road & Track Coilovers for E8X BMW 1 Series [BMS MI01S1]

Guaranteed Safe Checkout