Do I need the cancellation kit with these coilovers?

Only on cars with Audi magnetic ride, the factory adaptive dampers. Öhlins lists a cancellation kit alongside this kit for the 8S TT range to prevent fault codes once the factory electronic dampers come out, part 35020-24. Cars on passive dampers do not need it.

Which cars do the Coilovers for 8S Audi TT fit?

Öhlins kit VWS MU21S2 covers the 8S Audi TT, TTS and TT RS, and shares its part number with other all-wheel-drive MQB cars, including the Audi S3 and RS3 and the Mk7 and Mk8 Golf R. The earlier 8J TT uses a different Öhlins kit.

Is the setup different on the TT?

Slightly. The Öhlins mounting instructions give the TT a rear spring preload adjuster height of 10 mm, against 25 to 35 mm for the other MQB cars this kit fits, so the installer starts from the TT figure before fine tuning ride height.

What damping setting should I use?

Öhlins suggests 10 to 20 clicks for street driving, 5 to 10 for winding roads and 0 to 7 for track use. Each click changes compression and rebound together through the DFV valve, so one turn of the gold knob at each corner is all it takes to swap between road and circuit settings.

Does the kit reuse the factory top mounts?

Yes. The front struts and rear shock absorbers both use the original Audi top mounts, and the kit includes new upper spring seats and bearings for the front. A four-wheel alignment is still recommended after fitting.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Öhlins DFV Road & Track Coilovers for 8S Audi TT / TTS / TT RS

Öhlins’ DFV Road & Track Coilovers for 8S Audi TT, TTS and TT RS models replace all four dampers and springs with Öhlins kit VWS MU21S2, the same kit Öhlins builds for the all-wheel-drive MQB platform. A gold knob on each damper switches between street and track settings in seconds, and on Öhlins’ recommended setup the car sits about 20 mm lower than stock. It suits the owner who drives to the circuit and home again; a car trailered to every event wants a dedicated track damper.

Design and Performance

The Dual Flow Valve lets one adjuster shift low and high speed compression and rebound together, so road and track settings are a knob turn apart rather than a session of separate changes. Ride height is set with threaded spring preload adjusters at each corner, and both ends keep the original Audi top mounts.

Features

DFV (Dual Flow Valve) damping technology
One knob adjusts compression and rebound together at each corner
Inverted monotube McPherson struts up front
Rear shock absorbers with threaded spring preload adjusters
Uses the original top mounts front and rear
Rebuildable dampers for service and custom valving
Salt spray corrosion tested to ISO 9227
2-year Öhlins warranty

Specifications

Ride height at recommended setup: approximately 20 mm below stock, front and rear
Front lowering range: approximately 0-25 mm
Front spring rate: 400 lb/in (70 N/mm)
Rear spring rate: 457 lb/in (80 N/mm)
Height adjustment: spring preload, 2.0 mm per turn front and 1.5 mm per turn rear

What’s Included

Front struts (x2)
Front springs (x2)
Front upper spring seats and bearings (x2)
Rear shock absorbers (x2)
Rear springs (x2)
Rear spring preload adjusters (x2)
Spacers, dust boots, lock nuts and mounting hardware
C-spanners (x2) and Öhlins sticker kit
Owner’s manual

Applications

Audi TT: 8S | 2014-2023
Audi TTS: 8S | 2014-2023
Audi TT RS: 8S | 2016-2023

Notes

Cars with Audi magnetic ride, the factory adaptive dampers, also need the Öhlins DCC Cancellation Kit
Not for the earlier 8J TT, which uses the Öhlins coilovers for the 8P Audi A3 and 8J TT
Öhlins sells the same kit for the 8V / 8Y Audi S3 and A3 quattro, the 8V / 8Y Audi RS3, the Mk7 Golf R and the Mk8 Golf R, listed separately
Professional installation and a four-wheel alignment are recommended when fitting the Coilovers for 8S Audi TT models

Frequently Asked Questions

Do I need the cancellation kit with these coilovers? Only on cars with Audi magnetic ride, the factory adaptive dampers. Öhlins lists a cancellation kit alongside this kit for the 8S TT range to prevent fault codes once the factory electronic dampers come out, part 35020-24. Cars on passive dampers do not need it.
Which cars do the Coilovers for 8S Audi TT fit? Öhlins kit VWS MU21S2 covers the 8S Audi TT, TTS and TT RS, and shares its part number with other all-wheel-drive MQB cars, including the Audi S3 and RS3 and the Mk7 and Mk8 Golf R. The earlier 8J TT uses a different Öhlins kit.
Is the setup different on the TT? Slightly. The Öhlins mounting instructions give the TT a rear spring preload adjuster height of 10 mm, against 25 to 35 mm for the other MQB cars this kit fits, so the installer starts from the TT figure before fine tuning ride height.
What damping setting should I use? Öhlins suggests 10 to 20 clicks for street driving, 5 to 10 for winding roads and 0 to 7 for track use. Each click changes compression and rebound together through the DFV valve, so one turn of the gold knob at each corner is all it takes to swap between road and circuit settings.
Does the kit reuse the factory top mounts? Yes. The front struts and rear shock absorbers both use the original Audi top mounts, and the kit includes new upper spring seats and bearings for the front. A four-wheel alignment is still recommended after fitting.

About Öhlins

Öhlins was founded in 1976 by former motocross racer Kenth Öhlin and is based in Upplands Väsby, Sweden, where it develops dampers for motorcycles, cars and motorsport. Its suspension has won more than 300 world championship titles across motorcycle and car racing, its CES electronic damping went into series production on the Volvo S60R in 2003, and the company has been part of the Brembo group since 2025.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Öhlins DFV Road & Track Coilovers for 8S Audi TT / TTS / TT RS [VWS MU21S2]

Guaranteed Safe Checkout