How much do the BMW M135i M140i lowering springs drop the car?

The MMX BMW M135i M140i lowering springs drop the front by 25mm and the rear by 30mm versus the factory ride height. The greater rear drop removes the nose-high rake the F2x platform leaves the factory with, leveling the stance between front and rear for a more purposeful, planted appearance.

Are these compatible with Adaptive M dampers?

Yes. The MMX lowering springs are compatible with both Adaptive M electronic dampers and static factory dampers. The progressive spring rates are specifically calibrated to complement the factory F2x damper characteristics without introducing harshness or mismatched damping.

Do the BMW M135i M140i lowering springs also fit the M235i and M240i?

Yes. The same kit fits the F20 / F21 M135i (2012-2016), F20 / F21 M140i (2016-2019), F22 / F23 M235i (2014-2016), and F22 / F23 M240i (2016-2021).

Will the handling feel noticeably different after fitting?

Yes. The lower center of gravity and stiffer progressive spring rates produce sharper turn-in, reduced body roll, and improved mid-corner confidence compared to the factory setup. Ride quality at lower speeds is retained; the improvement in feel is most pronounced during spirited driving.

What is included in the kit?

The kit is sold as a complete set of four springs: 2 front springs and 2 rear springs. No additional hardware is required for a direct-fit installation.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

MMX Lowering Springs for F2x BMW M135i, M140i, M235i, and M240i

BMW M135i M140i lowering springs from MMX Performance are a direct-fit progressive-rate upgrade for the F2x platform, covering the F20 / F21 M135i and M140i and the F22 / F23 M235i and M240i. The progressive spring rates drop the front by 25mm and the rear by 30mm versus factory ride height, removing the inherent front-to-rear rake that leaves the F2x looking nose-high from the factory and replacing it with a level, planted stance. The handling improvement is equally significant: sharper front-end response, reduced body roll, more mid-corner confidence, and a chassis that feels genuinely agile and connected rather than soft and detached. Compatible with both Adaptive M and static factory dampers and finished in MMX Metallic Grey, these springs are a direct replacement for the factory units with no modification required.

Features

Lowers vehicle 25mm front and 30mm rear versus factory ride height
Progressive spring rates for balanced ride comfort and performance
Removes factory front-to-rear rake for a level, planted stance
Lowers the center of gravity for improved handling dynamics
Reduced body roll and sharper turn-in
Retains ride quality at lower speeds
Compatible with Adaptive M and static factory dampers
MMX Metallic Grey corrosion-resistant finish
Direct replacement for factory springs; no modifications required

Applications

BMW M135i: F20, F21 | 2012-2016
BMW M140i: F20, F21 | 2016-2019
BMW M235i: F22, F23 | 2014-2016
BMW M240i: F22, F23 | 2016-2021

Notes

Sold as a complete set
Images are generic; actual product may vary

Frequently Asked Questions

How much do the BMW M135i M140i lowering springs drop the car? The MMX BMW M135i M140i lowering springs drop the front by 25mm and the rear by 30mm versus the factory ride height. The greater rear drop removes the nose-high rake the F2x platform leaves the factory with, leveling the stance between front and rear for a more purposeful, planted appearance.
Are these compatible with Adaptive M dampers? Yes. The MMX lowering springs are compatible with both Adaptive M electronic dampers and static factory dampers. The progressive spring rates are specifically calibrated to complement the factory F2x damper characteristics without introducing harshness or mismatched damping.
Do the BMW M135i M140i lowering springs also fit the M235i and M240i? Yes. The same kit fits the F20 / F21 M135i (2012-2016), F20 / F21 M140i (2016-2019), F22 / F23 M235i (2014-2016), and F22 / F23 M240i (2016-2021).
Will the handling feel noticeably different after fitting? Yes. The lower center of gravity and stiffer progressive spring rates produce sharper turn-in, reduced body roll, and improved mid-corner confidence compared to the factory setup. Ride quality at lower speeds is retained; the improvement in feel is most pronounced during spirited driving.
What is included in the kit? The kit is sold as a complete set of four springs: 2 front springs and 2 rear springs. No additional hardware is required for a direct-fit installation.

About MMX Performance

MMX Performance is a UK-based specialist in performance parts for BMW and MINI vehicles, crafting high-quality upgrades that blend precision engineering, rigorous testing, and motorsport heritage. Driven by enthusiast culture, MMX designs its products in the UK and puts them through track validation to ensure durability, fitment accuracy, and on-road performance. Their catalog spans drivetrain components, spacers, hardware, and chassis enhancements, all tailored to elevate both the driving experience and visual appeal of BMW and MINI models.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

MMX Lowering Springs for F2x BMW M135i, M140i, M235i, and M240i [MMR08-0501]

Guaranteed Safe Checkout

MMX Lowering Springs for F2x BMW M135i, M140i, M235i, and M240i

Features

Applications

Notes

Frequently Asked Questions

About MMX Performance

Reviews