Does the Karbonius engine cover come with a BMW M badge?

No. The BMW M badge is not supplied with the cover. Karbonius designed the part so the original badge lifts off the factory engine cover and transfers across to the carbon piece, which keeps the genuine BMW badge on the car. Set the badge aside carefully when the factory cover comes off.

Which cars does the Carbon Engine Cover for G8X fit?

The Carbon Engine Cover for G8X fits every S58 powered G8X car: the G87 M2, the G80 M3, the G81 M3 Touring, the G82 M4 and the G83 M4 Convertible. Karbonius registers all five chassis against this part number and no other BMW.

Does this replace the factory engine cover or fit over it?

It replaces it. The Karbonius piece is a full replacement developed from original BMW measurements, so the factory cover comes off and the carbon cover takes its place on the same mounting points. Overlay covers sit on top of the plastic original and add height to the engine bay; this one does not.

What is the Karbonius engine cover made from?

Prepreg carbon fiber, hand laid and cured in an autoclave at Karbonius in Milladoiro, Spain. Prepreg holds its resin content and its finish at the temperatures a loaded S58 engine bay reaches, which is why the visible weave stays flat and dark rather than yellowing. The outer face is a 2x2 twill.

How difficult is the installation?

Level-1. The cover uses the original BMW mounting points and needs no drilling, cutting or permanent alteration, so it goes on with hand tools in a few minutes. Transfer the factory M badge from the old cover first, then seat the carbon cover on the same posts and refit the fasteners.

What is the difference between the gloss and matte finishes?

The carbon and the layup are identical and only the clear coat differs. Gloss gives a deep reflective surface that reads closest to BMW M Performance carbon trim. Matte gives a flat satin surface that hides dust and fingerprints better in an engine bay. Both carry the same 2x2 twill weave and the same red accent detailing.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Karbonius Carbon Engine Cover for G8X BMW M2 / M3 / M4

Karbonius’ Carbon Engine Cover for G8X BMW M2 / M3 / M4 replaces the factory S58 cover outright rather than hiding it under an overlay. The part is hand laid and autoclave cured in Milladoiro, Spain, by the shop whose E46 M3 CSL airbox set the benchmark for BMW carbon, and the tooling came off original BMW measurements so the cover drops onto the factory mounting points with nothing drilled and nothing trimmed. Prepreg carbon holds its finish at the temperatures a loaded engine bay reaches, the 2×2 twill reads as an extension of BMW’s own M Performance carbon, and red accent lines trace the panel geometry across the weave. The factory M badge transfers across, so what is left under the hood is the cover BMW might have fitted had the option existed.

Construction

The Carbon Engine Cover for G8X is laid up from prepreg carbon fiber and cured in an autoclave, the same process Karbonius runs across its BMW range, and the cured laminate keeps its shape and its surface at the temperatures an S58 bay reaches under load. The visible face is a 2×2 twill under a gloss or matte clear coat, chosen to sit alongside BMW’s own M Performance carbon rather than compete with it, with red accent lines picking out the panel geometry. Every part is built in Spain and carries a three-year warranty against manufacturing defects.

Bolt-On and Go

Karbonius developed the Carbon Engine Cover for G8X from original BMW measurements, and it uses the car’s own mounting points, so it goes on with hand tools and comes off the same way. Nothing is drilled, cut or permanently altered. The factory BMW M badge lifts off the original cover and transfers straight across, which keeps the badge the car was built with rather than substituting a reproduction.

Features

Prepreg carbon fiber, hand laid and autoclave cured in Spain
Full replacement for the factory S58 engine cover, not an overlay
Developed from original BMW measurements for factory fitment
Factory BMW M badge transfers across and is reused
2×2 twill weave in a choice of gloss or matte clear coat
Red accent detailing over the weave
Lightweight
No drilling, cutting or permanent alteration
Level-1 install difficulty
Three-year Karbonius warranty against manufacturing defects

Applications

BMW M2: G87 | 2023-present | S58
BMW M3: G80 | 2021-present | S58
BMW M3 Touring: G81 | 2023-present | S58
BMW M4: G82 | 2021-present | S58
BMW M4 Convertible: G83 | 2022-present | S58

Notes

Sold as a single engine cover
The BMW M badge is not included and is transferred from the factory cover
Karbonius is an independent manufacturer and this cover is not an OEM BMW part
The Carbon Engine Cover for G8X is built to order in Spain, so confirm the current lead time before ordering
The matching engine bay pieces for the same cars are the Karbonius Carbon Cooling Shroud Cover for G8X BMW M2 / M3 / M4 (G8XCS01-CF-2 / G8XCS01-CFM-2) and the Karbonius Carbon CSL Cooling Shroud Cover for G8X BMW M2 / M3 / M4 (G8XCS02-CF-2 / G8XCS02-CFM-2)

Frequently Asked Questions

Does the Karbonius engine cover come with a BMW M badge? No. The BMW M badge is not supplied with the cover. Karbonius designed the part so the original badge lifts off the factory engine cover and transfers across to the carbon piece, which keeps the genuine BMW badge on the car. Set the badge aside carefully when the factory cover comes off.
Which cars does the Carbon Engine Cover for G8X fit? The Carbon Engine Cover for G8X fits every S58 powered G8X car: the G87 M2, the G80 M3, the G81 M3 Touring, the G82 M4 and the G83 M4 Convertible. Karbonius registers all five chassis against this part number and no other BMW.
Does this replace the factory engine cover or fit over it? It replaces it. The Karbonius piece is a full replacement developed from original BMW measurements, so the factory cover comes off and the carbon cover takes its place on the same mounting points. Overlay covers sit on top of the plastic original and add height to the engine bay; this one does not.
What is the Karbonius engine cover made from? Prepreg carbon fiber, hand laid and cured in an autoclave at Karbonius in Milladoiro, Spain. Prepreg holds its resin content and its finish at the temperatures a loaded S58 engine bay reaches, which is why the visible weave stays flat and dark rather than yellowing. The outer face is a 2×2 twill.
How difficult is the installation? Level-1. The cover uses the original BMW mounting points and needs no drilling, cutting or permanent alteration, so it goes on with hand tools in a few minutes. Transfer the factory M badge from the old cover first, then seat the carbon cover on the same posts and refit the fasteners.
What is the difference between the gloss and matte finishes? The carbon and the layup are identical and only the clear coat differs. Gloss gives a deep reflective surface that reads closest to BMW M Performance carbon trim. Matte gives a flat satin surface that hides dust and fingerprints better in an engine bay. Both carry the same 2×2 twill weave and the same red accent detailing.

About Karbonius

Karbonius Composites is a Spanish carbon fiber manufacturer known for producing some of the most accurate and highest quality carbon components for BMW M cars. Every part is engineered and manufactured in-house from prepreg carbon fiber and cured in an autoclave, the same process that produced the legendary E46 M3 CSL airbox. Parts are built in Milladoiro, A Coruña, and carry a three-year warranty against manufacturing defects. The result is factory-level fitment, motorsport-grade strength, and a depth of finish that mass-produced carbon cannot match.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Karbonius Carbon Engine Cover for G8X BMW M2 / M3 / M4

Guaranteed Safe Checkout

Karbonius Carbon Engine Cover for G8X BMW M2 / M3 / M4

Construction

Bolt-On and Go

Features

Applications

Notes

Frequently Asked Questions

About Karbonius

Reviews