Do the ID2600-XDS 60mm Fuel Injectors in this ten piece set fit a 2008 Viper?

Injector Dynamics lists the ID2600-XDS 60mm Fuel Injectors with 14mm top and lower O-rings, set of ten, for the 2003 to 2007 Viper and the 2004 to 2006 Ram SRT-10 only. Later Vipers are not listed for this configuration, so contact us with your year before ordering.

Is a ten injector set of 2600s overkill for a V10?

For an unboosted V10, yes. Ten injectors at 2600cc per minute nominal each are sized for a Viper or SRT-10 with forced induction running alcohol fuel. If your plans stop short of that, a smaller Injector Dynamics flow class will cost less and calibrate more easily at idle.

Which fuels should a Viper avoid with these?

Ethers and nitromethane. Injector Dynamics lists MTBE, ETBE and TAME as incompatible with the ID2600-XDS, along with nitromethane. Methanol, E85 and all known hydrocarbon fuels are approved, so a boosted Viper or SRT-10 on alcohol is well within the rating. Check any race fuel blend first.

Which electrical connector do these injectors use?

USCAR. Engines already wired for USCAR need nothing more. For Denso, EV1, OBD2 Honda or 2012 and later Honda connectors, Injector Dynamics makes plug and play adapters that avoid cutting the factory wiring. Those adapters are separate parts and are not in this set.

Are the ten injectors matched to each other?

Yes. Injector Dynamics flow matches all ten using Dual Slope Matching, in both the linear and short pulse ranges, so each cylinder of the V10 receives the same fuel. If one fails, a replacement is supplied through Injector Dynamics under its one year defect warranty.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Injector Dynamics ID2600-XDS 60mm Fuel Injectors with 14mm Top and 14mm Lower O-Ring, Set of 10

Injector Dynamics’ ID2600-XDS 60mm Fuel Injectors fill out this ten-injector set with purple 14mm top adapters and 14mm lower O-rings, the layout Injector Dynamics lists for the 2003-2007 Dodge Viper and the 2004-2006 Ram SRT-10. Ten injectors at 2600cc/min nominal is a huge reserve of fuel, sized for a V10 carrying twin turbos or a large supercharger on methanol or E85. An unboosted Viper V10, even with heads and cam, will not need it, and a smaller Injector Dynamics class keeps the idle calibration simpler.

Configuration

Each of the ten injectors uses the 60mm body with a purple 14mm top adapter and a 14mm lower O-ring, so they go into the factory Viper and SRT-10 rail and manifold as supplied.

Features

Built to Injector Dynamics specification with Bosch Motorsport, the top-flowing injector in the Bosch range
Internals resist corrosion from long-term exposure to methanol and ethanol
Flows roughly half again as much as the ID1700x
Matched in both the linear and short pulse ranges using Dual Slope Matching

Specifications

Nominal flow: 2600cc/min
Maximum differential fuel pressure: 9.0 bar (130.5 psi)
Minimum voltage: 11 volts
Fuel compatibility: Methanol, ethanol and all known hydrocarbons; not ethers or nitromethane
Electrical connector: USCAR
Body length: 60mm
Top: 14mm adapter (purple)
Lower: 14mm O-ring

What’s Included

ID2600-XDS fuel injectors with 14mm top adapters fitted (x10)

Applications

Injector Dynamics lists the ID2600-XDS 60mm Fuel Injectors in this configuration for:

Dodge Viper: 2003-2007
Dodge Ram SRT-10: 2004-2006

Notes

Each injector has a USCAR plug; engines wired for Denso, EV1, OBD2 Honda or 2012+ Honda connectors need an Injector Dynamics adapter, and the Denso one is the Injector Dynamics USCAR to Denso PnP Adapter
A tuner must load the Injector Dynamics characterization data and recalibrate the ECU after installation
Injector Dynamics specifies a minimum supply of 11 volts for the ID2600-XDS

Frequently Asked Questions

Do the ID2600-XDS 60mm Fuel Injectors in this ten piece set fit a 2008 Viper? Injector Dynamics lists the ID2600-XDS 60mm Fuel Injectors with 14mm top and lower O-rings, set of ten, for the 2003 to 2007 Viper and the 2004 to 2006 Ram SRT-10 only. Later Vipers are not listed for this configuration, so contact us with your year before ordering.
Is a ten injector set of 2600s overkill for a V10? For an unboosted V10, yes. Ten injectors at 2600cc per minute nominal each are sized for a Viper or SRT-10 with forced induction running alcohol fuel. If your plans stop short of that, a smaller Injector Dynamics flow class will cost less and calibrate more easily at idle.
Which fuels should a Viper avoid with these? Ethers and nitromethane. Injector Dynamics lists MTBE, ETBE and TAME as incompatible with the ID2600-XDS, along with nitromethane. Methanol, E85 and all known hydrocarbon fuels are approved, so a boosted Viper or SRT-10 on alcohol is well within the rating. Check any race fuel blend first.
Which electrical connector do these injectors use? USCAR. Engines already wired for USCAR need nothing more. For Denso, EV1, OBD2 Honda or 2012 and later Honda connectors, Injector Dynamics makes plug and play adapters that avoid cutting the factory wiring. Those adapters are separate parts and are not in this set.
Are the ten injectors matched to each other? Yes. Injector Dynamics flow matches all ten using Dual Slope Matching, in both the linear and short pulse ranges, so each cylinder of the V10 receives the same fuel. If one fails, a replacement is supplied through Injector Dynamics under its one year defect warranty.

About Injector Dynamics

Injector Dynamics is an Arizona injector specialist and an authorized technical partner of Bosch Motorsport, developing its injectors to its own specification rather than modifying production parts. It introduced slope and offset matching in 2007, and its Dual Slope Matching, developed by engineer Aaron Looft, extends matching into the short pulse widths that boosted and ethanol engines rely on. Its flow benches are built in house and calibrated against a NIST-traceable flow prover. Injector Dynamics supplied the emissions-compliant injectors for the twin-turbo Noble M600, and its injectors were fitted to the first seven-second Nissan GT-R and the first 300 mph motorcycle.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Injector Dynamics ID2600-XDS 60mm Fuel Injectors with 14mm Top and 14mm Lower O-Ring, Set of 10 [2600.60.14.14.10]

Guaranteed Safe Checkout

Injector Dynamics ID2600-XDS 60mm Fuel Injectors with 14mm Top and 14mm Lower O-Ring, Set of 10

Configuration

Features

Specifications

What’s Included

Applications

Notes

Frequently Asked Questions

About Injector Dynamics

Reviews