Will these fit a Supra with the factory fuel rail?

No. Injector Dynamics lists the 34mm configuration for the 1993 to 1998 Supra 2JZ-GTE only when it is fitted with a Radium fuel rail. Factory rail 2JZ-GTE engines use 60mm configurations with an 11mm or 14mm top, so check which rail is on the car before ordering.

Are the ID2600-XDS 34mm Fuel Injectors listed for the BMW S58?

Yes. Injector Dynamics lists the ID2600-XDS 34mm Fuel Injectors in this six piece configuration for the S58, along with the 2017 and later Ford Raptor. As with any injector change on a modern engine, the tuning platform must support the new injector data.

Is this much flow useful on pump gasoline?

No, in most cases. Gasoline needs far less volume than E85 or methanol for the same power, so a six cylinder on gasoline will run the 2600 at very short pulses. Dual Slope Matching keeps the injectors consistent there, but a smaller flow class is the easier fit for a gasoline car.

Do these injectors have electrical requirements?

Yes. Injector Dynamics specifies a minimum of 11 volts for the ID2600-XDS, and the connector is USCAR. Engines with other plug styles need Injector Dynamics plug and play adapters, sold separately. Check the supply voltage at the injectors as well as the charging system output.

Can I run methanol or E85 long term?

Yes. The 2600 was developed with Bosch Motorsport for liquid fuels and has corrosion resistant internals intended for long term ethanol and methanol service. Avoid ether blends such as MTBE, ETBE and TAME, and nitromethane, which Injector Dynamics does not rate the 2600 to handle.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Injector Dynamics ID2600-XDS 34mm Fuel Injectors with 14mm Top and Lower O-Rings, Set of 6

Injector Dynamics’ ID2600-XDS 34mm Fuel Injectors in a set of six cover three very different engines on the Injector Dynamics list: the BMW S58, the 2017-on Ford Raptor and the 1993-1998 Toyota Supra 2JZ-GTE fitted with a Radium fuel rail. The common thread is a six-cylinder making big power on alcohol. A 2JZ-GTE on a large single turbo and methanol, or an S58 with upgraded turbos on E85, is where 2600cc/min per injector is needed. A stock-turbo six on pump gasoline has no use for this flow and will idle more easily on a smaller flow class.

Configuration

Six injectors in the 34mm length, with a 14mm O-ring at the top in place of an adapter and a 14mm O-ring below. On the Supra, Injector Dynamics specifies this length only with the Radium rail; factory-rail 2JZ-GTE cars take a 60mm configuration.

Features

Roughly half again the flow of the ID1700x, and the largest injector Bosch supplies
A 9.0 bar differential pressure rating leaves room for raised base pressure
Dual Slope Matching covers the non-linear low pulse range as well as the linear range

Specifications

Nominal flow: 2600cc/min
Maximum differential fuel pressure: 9.0 bar (130.5 psi)
Minimum voltage: 11 volts
Fuel compatibility: Methanol, ethanol, all known hydrocarbons; not ethers or nitromethane
Electrical connector: USCAR
Body length: 34mm
Top: 14mm O-ring, no top adapter
Lower: 14mm O-ring

What’s Included

ID2600-XDS fuel injectors with 14mm O-rings top and bottom (x6)

Applications

Injector Dynamics lists the ID2600-XDS 34mm Fuel Injectors in this configuration for:

BMW: S58
Ford Raptor: 2017+
Toyota Supra Turbo: 1993-1998 | 2JZ-GTE with Radium fuel rail

Notes

No connector adapters come with the USCAR plugs; a Denso-plug engine pairs with the Injector Dynamics USCAR to Denso PnP Adapter, and EV1 or OBD2 wiring needs the matching Injector Dynamics adapter
On the 2JZ-GTE, this 34mm set is listed only with a Radium fuel rail; factory-rail cars use a 60mm configuration
An ECU recalibration is required after fitting, using the Injector Dynamics characterization data

Frequently Asked Questions

Will these fit a Supra with the factory fuel rail? No. Injector Dynamics lists the 34mm configuration for the 1993 to 1998 Supra 2JZ-GTE only when it is fitted with a Radium fuel rail. Factory rail 2JZ-GTE engines use 60mm configurations with an 11mm or 14mm top, so check which rail is on the car before ordering.
Are the ID2600-XDS 34mm Fuel Injectors listed for the BMW S58? Yes. Injector Dynamics lists the ID2600-XDS 34mm Fuel Injectors in this six piece configuration for the S58, along with the 2017 and later Ford Raptor. As with any injector change on a modern engine, the tuning platform must support the new injector data.
Is this much flow useful on pump gasoline? No, in most cases. Gasoline needs far less volume than E85 or methanol for the same power, so a six cylinder on gasoline will run the 2600 at very short pulses. Dual Slope Matching keeps the injectors consistent there, but a smaller flow class is the easier fit for a gasoline car.
Do these injectors have electrical requirements? Yes. Injector Dynamics specifies a minimum of 11 volts for the ID2600-XDS, and the connector is USCAR. Engines with other plug styles need Injector Dynamics plug and play adapters, sold separately. Check the supply voltage at the injectors as well as the charging system output.
Can I run methanol or E85 long term? Yes. The 2600 was developed with Bosch Motorsport for liquid fuels and has corrosion resistant internals intended for long term ethanol and methanol service. Avoid ether blends such as MTBE, ETBE and TAME, and nitromethane, which Injector Dynamics does not rate the 2600 to handle.

About Injector Dynamics

Injector Dynamics is an Arizona injector specialist and an authorized technical partner of Bosch Motorsport, developing its injectors to its own specification rather than modifying production parts. It introduced slope and offset matching in 2007, and its Dual Slope Matching, developed by engineer Aaron Looft, extends matching into the short pulse widths that boosted and ethanol engines rely on. Its flow benches are built in house and calibrated against a NIST-traceable flow prover. Injector Dynamics supplied the emissions-compliant injectors for the twin-turbo Noble M600, and its injectors were fitted to the first seven-second Nissan GT-R and the first 300 mph motorcycle.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Injector Dynamics ID2600-XDS 34mm Fuel Injectors with 14mm Top and Lower O-Rings, Set of 6 [2600.34.14.14.6]

Guaranteed Safe Checkout

Injector Dynamics ID2600-XDS 34mm Fuel Injectors with 14mm Top and Lower O-Rings, Set of 6

Configuration

Features

Specifications

What’s Included

Applications

Notes

Frequently Asked Questions

About Injector Dynamics

Reviews