Do the ID1750-XDS 60mm Fuel Injectors fit a Focus RS?

Yes. Injector Dynamics lists the ID1750-XDS 60mm Fuel Injectors with the 14mm top and 14mm lower O-ring for the Focus RS, as well as the Focus SVT, the Focus ZX3 and the Mustang SVO. A Focus RS fitted with this set needs a fuel system and calibration sized for the extra flow.

Which Genesis 2.0t years does this set fit?

Injector Dynamics lists this 60mm configuration for the 2013 and 2014 Genesis 2.0t. The 2009 through 2012 cars take a 48mm injector with the R35 lower spacer instead, so check the model year before ordering. Both versions are offered in the 1750 flow class.

Can a turbo four with this set run E85?

Yes. Injector Dynamics rates the 1750 for ethanol, methanol, MTBE, nitromethane and all known hydrocarbon fuels. On a Focus RS, SR20DET or Genesis 2.0t, E85 takes noticeably more fuel volume than gasoline, so the pump, lines and regulator must be sized to keep the four injectors supplied.

Is there a warranty on this four cylinder set?

Yes, one year from purchase against manufacturer defects, as long as the injectors run correct fuel with proper filtration. Because the four are flow matched, a failed injector is replaced through Injector Dynamics, and the company can also clean, inspect and flow test the set at its Arizona facility once it has some miles on it.

Which wiring adapters might a Focus or 240SX need?

That depends on the factory plug. USCAR wiring connects directly. Denso, EV1 and Honda OBD2 plugs need the matching Injector Dynamics plug and play adapter, sold separately. Look at the connector on your Focus, 240SX, G20 or Celica injector before ordering so four adapters arrive with the set if needed.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Injector Dynamics ID1750-XDS 60mm Fuel Injectors with 14mm Top and 14mm Lower O-Ring, Set of 4

Injector Dynamics’ ID1750-XDS 60mm Fuel Injectors for four-cylinder engines with a 14mm top come in this set of four with a purple adapter and a 14mm lower O-ring, and the list runs from the E30 M3 and Focus RS to the SR20DET and the 2013-2014 Genesis 2.0t. At 1728cc/min per injector, the set is meant for a turbocharged four-cylinder on E85 or a big turbo on race fuel. A naturally aspirated E30 M3 or a stock Focus ZX3 will not use anywhere near this flow. Fit it when the turbo and the fuel are both changing.

Configuration

Some engines on this list, including the SR20DET, 240SX, G20 and Celica All-Trac, are also listed by Injector Dynamics with an 11mm top. This is the 14mm top version.

Features

Purple 14mm top adapters and 14mm lower O-rings for four-cylinder rails
Rated for methanol, ethanol, MTBE, nitromethane and all known hydrocarbon fuels
Flow matched as a set, with characterization data published for the tuner

Specifications

Nominal flow: 1728cc/min at 3.0 bar (43.5 psi), E10 certification fuel at 49C (120F)
Maximum differential fuel pressure: 7.0 bar (101.5 psi)
Offset: 1169 microseconds at 43.5 psi and 12 volts
Electrical connector: USCAR
Body length: 60mm
Top: 14mm adapter (purple)
Lower: 14mm O-ring

What’s Included

ID1750-XDS fuel injectors with purple 14mm top adapters and 14mm lower O-rings (x4)

Applications

Injector Dynamics lists the ID1750-XDS 60mm Fuel Injectors in this configuration for:

BMW M3: E30 | 1988-1991
Ford: Focus ZX3, Focus SVT, Focus RS, Mustang SVO
Hyundai Genesis 2.0t: 2013-2014
Infiniti G20: 1991-1996 and 1999-2002
Nissan: 240SX S13 / S14 / S15; SR20DET FWD
Toyota Celica All-Trac: 1989-1999 | 3S-GTE

Notes

The SR20DET, 240SX, G20 and Celica All-Trac are also listed with an 11mm top; match the top size to your fuel rail
USCAR connectors are fitted; Denso, EV1 and OBD2 Honda wiring needs plug-and-play adapters, sold separately; for Denso plugs see the Injector Dynamics USCAR to Denso PnP Adapter
The engine must be recalibrated with the Injector Dynamics characterization data before it is driven

Frequently Asked Questions

Do the ID1750-XDS 60mm Fuel Injectors fit a Focus RS? Yes. Injector Dynamics lists the ID1750-XDS 60mm Fuel Injectors with the 14mm top and 14mm lower O-ring for the Focus RS, as well as the Focus SVT, the Focus ZX3 and the Mustang SVO. A Focus RS fitted with this set needs a fuel system and calibration sized for the extra flow.
Which Genesis 2.0t years does this set fit? Injector Dynamics lists this 60mm configuration for the 2013 and 2014 Genesis 2.0t. The 2009 through 2012 cars take a 48mm injector with the R35 lower spacer instead, so check the model year before ordering. Both versions are offered in the 1750 flow class.
Can a turbo four with this set run E85? Yes. Injector Dynamics rates the 1750 for ethanol, methanol, MTBE, nitromethane and all known hydrocarbon fuels. On a Focus RS, SR20DET or Genesis 2.0t, E85 takes noticeably more fuel volume than gasoline, so the pump, lines and regulator must be sized to keep the four injectors supplied.
Is there a warranty on this four cylinder set? Yes, one year from purchase against manufacturer defects, as long as the injectors run correct fuel with proper filtration. Because the four are flow matched, a failed injector is replaced through Injector Dynamics, and the company can also clean, inspect and flow test the set at its Arizona facility once it has some miles on it.
Which wiring adapters might a Focus or 240SX need? That depends on the factory plug. USCAR wiring connects directly. Denso, EV1 and Honda OBD2 plugs need the matching Injector Dynamics plug and play adapter, sold separately. Look at the connector on your Focus, 240SX, G20 or Celica injector before ordering so four adapters arrive with the set if needed.

About Injector Dynamics

Injector Dynamics is an Arizona injector specialist and an authorized technical partner of Bosch Motorsport, developing its injectors to its own specification rather than modifying production parts. It introduced slope and offset matching in 2007, and its Dual Slope Matching, developed by engineer Aaron Looft, extends matching into the short pulse widths that boosted and ethanol engines rely on. Its flow benches are built in house and calibrated against a NIST-traceable flow prover. Injector Dynamics supplied the emissions-compliant injectors for the twin-turbo Noble M600, and its injectors were fitted to the first seven-second Nissan GT-R and the first 300 mph motorcycle.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Injector Dynamics ID1750-XDS 60mm Fuel Injectors with 14mm Top and 14mm Lower O-Ring, Set of 4 [1750.60.14.14.4]

Guaranteed Safe Checkout

Injector Dynamics ID1750-XDS 60mm Fuel Injectors with 14mm Top and 14mm Lower O-Ring, Set of 4

Configuration

Features

Specifications

What’s Included

Applications

Notes

Frequently Asked Questions

About Injector Dynamics

Reviews