Do the ID1750-XDS 60mm Fuel Injectors fit an Integra?

Yes. Injector Dynamics lists the ID1750-XDS 60mm Fuel Injectors with the 11mm top and 14mm lower O-ring for the 1990 through 2001 Integra, along with the 1988 through 2000 Civic, the 1992 through 2002 Accord and the 1992 through 2001 Prelude. Check the connector type on your engine before installing.

My 240SX is listed twice, which set do I need?

Injector Dynamics lists the 240SX, SR20DET, G20 and Celica All-Trac with both 11mm and 14mm tops. Measure the top O-ring of your current injector or check the fuel rail bore. If it is 11mm, this set fits; if it is 14mm, choose the 14mm top version in the same flow class.

Will a Honda or Acura need injector plug adapters?

Yes, unless the engine already has USCAR plugs. These injectors use USCAR connectors, and Injector Dynamics makes plug and play adapters for OBD2 Honda, 2012 and newer Honda, Denso and EV1 wiring, sold separately. Check the plug on your Civic, Integra, Accord or Prelude injector so the correct four adapters ship with the set.

Is the 1750 too big for a naturally aspirated Civic or Integra?

Yes, in most cases. At 1728cc per minute it is sized for turbocharged or ethanol engines that have outgrown smaller injectors. A naturally aspirated Honda on gasoline is better matched to the ID1050-XDS, which flows 1065cc per minute and handles up to 10 bar, and which Injector Dynamics also builds in a 60mm length.

Does Injector Dynamics service these injectors later on?

Yes. Injector Dynamics offers a cleaning, inspection and flow test service in Arizona. This new set of four also carries a one year warranty from purchase against manufacturer defects, with correct fuel and proper filtration, and a replacement for one of the matched four is arranged through Injector Dynamics.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Injector Dynamics ID1750-XDS 60mm Fuel Injectors with 11mm Top and 14mm Lower O-Ring, Set of 4

Injector Dynamics’ ID1750-XDS 60mm Fuel Injectors in this four-cylinder set use a blue 11mm top adapter and a 14mm lower O-ring, the arrangement Injector Dynamics lists for 1988-2002 Honda and Acura models, the SR20DET Nissans and the Celica All-Trac. At 1728cc/min per injector, it belongs on a turbocharged four-cylinder making big power or running E85. A naturally aspirated Civic or Integra on gasoline is better matched to a smaller flow class.

Configuration

Several of these engines appear twice in Injector Dynamics’ table, once with an 11mm top and once with a 14mm top. The difference is in the fuel rail; this is the 11mm version.

Features

Blue 11mm top adapters for rails built around the smaller top seal
Successor to the ID1700, adding dynamic flow with no increase in minimum fuel mass
Better cylinder-to-cylinder balance at low pulsewidths for steadier idle and light cruise

Specifications

Nominal flow: 1728cc/min at 3.0 bar (43.5 psi), E10 certification fuel at 49C (120F)
Maximum differential fuel pressure: 7.0 bar (101.5 psi)
Offset: 1169 microseconds at 43.5 psi and 12 volts
Electrical connector: USCAR
Body length: 60mm
Top: 11mm adapter (blue)
Lower: 14mm O-ring

What’s Included

ID1750-XDS fuel injectors with blue 11mm top adapters and 14mm lower O-rings (x4)

Applications

Injector Dynamics lists the ID1750-XDS 60mm Fuel Injectors in this configuration for:

Honda and Acura: Accord 1992-2002, Civic 1988-2000, Integra 1990-2001, Prelude 1992-2001
Infiniti G20: 1991-1996 and 1999-2002
Nissan 240SX: S13 / S14 / S15
Nissan: SR20DET FWD
Toyota Celica All-Trac: 1989-1999 | 3S-GTE

Notes

The G20, 240SX, SR20DET and Celica All-Trac are also listed with a 14mm top; match the top size to your fuel rail
Wiring with Denso, EV1, OBD2 Honda or 2012 and later Honda plugs needs an Injector Dynamics plug-and-play adapter to suit the USCAR connectors; for Denso plugs use the Injector Dynamics USCAR to Denso PnP Adapter
An ECU recalibration is required after fitting, using the Injector Dynamics characterization data

Frequently Asked Questions

Do the ID1750-XDS 60mm Fuel Injectors fit an Integra? Yes. Injector Dynamics lists the ID1750-XDS 60mm Fuel Injectors with the 11mm top and 14mm lower O-ring for the 1990 through 2001 Integra, along with the 1988 through 2000 Civic, the 1992 through 2002 Accord and the 1992 through 2001 Prelude. Check the connector type on your engine before installing.
My 240SX is listed twice, which set do I need? Injector Dynamics lists the 240SX, SR20DET, G20 and Celica All-Trac with both 11mm and 14mm tops. Measure the top O-ring of your current injector or check the fuel rail bore. If it is 11mm, this set fits; if it is 14mm, choose the 14mm top version in the same flow class.
Will a Honda or Acura need injector plug adapters? Yes, unless the engine already has USCAR plugs. These injectors use USCAR connectors, and Injector Dynamics makes plug and play adapters for OBD2 Honda, 2012 and newer Honda, Denso and EV1 wiring, sold separately. Check the plug on your Civic, Integra, Accord or Prelude injector so the correct four adapters ship with the set.
Is the 1750 too big for a naturally aspirated Civic or Integra? Yes, in most cases. At 1728cc per minute it is sized for turbocharged or ethanol engines that have outgrown smaller injectors. A naturally aspirated Honda on gasoline is better matched to the ID1050-XDS, which flows 1065cc per minute and handles up to 10 bar, and which Injector Dynamics also builds in a 60mm length.
Does Injector Dynamics service these injectors later on? Yes. Injector Dynamics offers a cleaning, inspection and flow test service in Arizona. This new set of four also carries a one year warranty from purchase against manufacturer defects, with correct fuel and proper filtration, and a replacement for one of the matched four is arranged through Injector Dynamics.

About Injector Dynamics

Injector Dynamics is an Arizona injector specialist and an authorized technical partner of Bosch Motorsport, developing its injectors to its own specification rather than modifying production parts. It introduced slope and offset matching in 2007, and its Dual Slope Matching, developed by engineer Aaron Looft, extends matching into the short pulse widths that boosted and ethanol engines rely on. Its flow benches are built in house and calibrated against a NIST-traceable flow prover. Injector Dynamics supplied the emissions-compliant injectors for the twin-turbo Noble M600, and its injectors were fitted to the first seven-second Nissan GT-R and the first 300 mph motorcycle.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Injector Dynamics ID1750-XDS 60mm Fuel Injectors with 11mm Top and 14mm Lower O-Ring, Set of 4 [1750.60.11.14.4]

Guaranteed Safe Checkout

Injector Dynamics ID1750-XDS 60mm Fuel Injectors with 11mm Top and 14mm Lower O-Ring, Set of 4

Configuration

Features

Specifications

What’s Included

Applications

Notes

Frequently Asked Questions

About Injector Dynamics

Reviews