What fuels can the ID1300-XDS 60mm Fuel Injectors run in an RB26?

Every known fuel, according to Injector Dynamics. The ID1300-XDS 60mm Fuel Injectors were developed for ethanol and methanol, with stainless internals, and keep a minimum fuel mass that suits gasoline. An RB26 can run pump fuel now and move to E85 or methanol later on the same six injectors.

Will these fit a V8 Tundra?

No, not as a set of six. Injector Dynamics lists the Tundra, FJ Cruiser and 4Runner for this six injector configuration without naming the engine, and a V8 needs eight injectors. Confirm your engine with Injector Dynamics before ordering, particularly on a Tundra, which was sold with more than one engine.

Can an RB26 run the old calibration with these fitted?

No. Six injectors at 1335cc per minute supply far more fuel per pulse than the factory GT-R injectors, so the existing calibration would run rich. The Injector Dynamics flow and offset characterization data has to be in the tune before the car is driven.

Do I want the 11mm or 14mm GT-R set?

Check the top of the injectors in your rail. Injector Dynamics lists the R32, R33 and R34 Skyline GT-R in both sizes, each with a 60mm body and Denso lower cushion. This set is the 14mm version with a purple top adapter, and the 11mm version uses a blue top adapter.

Are the six injectors in this GT-R set matched?

Yes. Injector Dynamics flow matches the six as a set for even fueling across the RB26, and single replacements come through Injector Dynamics. The warranty covers manufacturer defects for one year from purchase, provided the injectors run the correct fuel with proper filtration.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Injector Dynamics ID1300-XDS 60mm Fuel Injectors with 14mm Top and Denso Lower Cushion, Set of 6

Injector Dynamics’ ID1300-XDS 60mm Fuel Injectors in this six-injector set use a purple 14mm top and a Denso lower cushion, the configuration Injector Dynamics lists for the 14mm-top R32, R33 and R34 Skyline GT-R and for the Toyota FJ Cruiser, 4Runner and Tundra. An RB26 on E85 with larger turbos is the obvious candidate, and 1335cc/min per injector at 3.0 bar on iso-octane gives it room to grow. The Toyota trucks only need this flow with a supercharger or turbo fitted. Stainless internals, designed for alcohol fuels, sit alongside a minimum fuel mass that idles well on gasoline.

Configuration

This is the 14mm-top Skyline GT-R set; the 11mm-top GT-R set with the same Denso lower cushion is a separate part. D in the part number stands for the Denso lower cushion.

Features

Flow matched as a set of 6
Designed specifically for alternative fuels and compatible with all known fuels
All-stainless internals, once unique among performance injectors
Purple 14mm top adapter with a Denso lower cushion on all six injectors

Specifications

Nominal flow: 1335cc/min at 3.0 bar (43.5 psi), iso-octane at 52C (125F)
Maximum differential fuel pressure: 7.0 bar (101.5 psi)
Fuel compatibility: All known fuels
Electrical connector: USCAR
Body length: 60mm
Top: 14mm adapter (purple)
Lower: Denso cushion

What’s Included

ID1300-XDS fuel injectors with purple 14mm top adapters and Denso lower cushions (x6)

Applications

Injector Dynamics lists the ID1300-XDS 60mm Fuel Injectors in this configuration for:

Nissan Skyline GT-R: R32, R33, R34 | 14mm top version
Toyota: FJ Cruiser, 4Runner, Tundra

Notes

USCAR plugs are fitted, so Denso, EV1 or OBD2 wiring needs adapters, sold separately; for Denso plugs use the Injector Dynamics USCAR to Denso PnP Adapter
Plan an ECU recalibration using the published Injector Dynamics characterization data
This is the 14mm-top GT-R configuration; GT-Rs with an 11mm-top rail need the 11mm Denso set

Frequently Asked Questions

What fuels can the ID1300-XDS 60mm Fuel Injectors run in an RB26? Every known fuel, according to Injector Dynamics. The ID1300-XDS 60mm Fuel Injectors were developed for ethanol and methanol, with stainless internals, and keep a minimum fuel mass that suits gasoline. An RB26 can run pump fuel now and move to E85 or methanol later on the same six injectors.
Will these fit a V8 Tundra? No, not as a set of six. Injector Dynamics lists the Tundra, FJ Cruiser and 4Runner for this six injector configuration without naming the engine, and a V8 needs eight injectors. Confirm your engine with Injector Dynamics before ordering, particularly on a Tundra, which was sold with more than one engine.
Can an RB26 run the old calibration with these fitted? No. Six injectors at 1335cc per minute supply far more fuel per pulse than the factory GT-R injectors, so the existing calibration would run rich. The Injector Dynamics flow and offset characterization data has to be in the tune before the car is driven.
Do I want the 11mm or 14mm GT-R set? Check the top of the injectors in your rail. Injector Dynamics lists the R32, R33 and R34 Skyline GT-R in both sizes, each with a 60mm body and Denso lower cushion. This set is the 14mm version with a purple top adapter, and the 11mm version uses a blue top adapter.
Are the six injectors in this GT-R set matched? Yes. Injector Dynamics flow matches the six as a set for even fueling across the RB26, and single replacements come through Injector Dynamics. The warranty covers manufacturer defects for one year from purchase, provided the injectors run the correct fuel with proper filtration.

About Injector Dynamics

Injector Dynamics is an Arizona injector specialist and an authorized technical partner of Bosch Motorsport, developing its injectors to its own specification rather than modifying production parts. It introduced slope and offset matching in 2007, and its Dual Slope Matching, developed by engineer Aaron Looft, extends matching into the short pulse widths that boosted and ethanol engines rely on. Its flow benches are built in house and calibrated against a NIST-traceable flow prover. Injector Dynamics supplied the emissions-compliant injectors for the twin-turbo Noble M600, and its injectors were fitted to the first seven-second Nissan GT-R and the first 300 mph motorcycle.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Injector Dynamics ID1300-XDS 60mm Fuel Injectors with 14mm Top and Denso Lower Cushion, Set of 6 [1300.60.14.D.6]

Guaranteed Safe Checkout

Injector Dynamics ID1300-XDS 60mm Fuel Injectors with 14mm Top and Denso Lower Cushion, Set of 6

Configuration

Features

Specifications

What’s Included

Applications

Notes

Frequently Asked Questions

About Injector Dynamics

Reviews