Will this set fit a 2JZ-GTE Supra with the factory rail?

No. Injector Dynamics lists this 34mm set for the 1993 to 1998 Supra Turbo only when it runs a Radium fuel rail. Supras on the factory rail are listed with 60mm injectors with either 11mm or 14mm tops. Check which rail your car has before ordering.

Which engines does this six-injector set cover?

Injector Dynamics lists it for the BMW S58, the 2017 and later Ford Raptor, the 2009 to 2012 Hyundai Genesis V6 and the 2JZ-GTE Supra on a Radium rail. Each of those takes a 34mm injector with 14mm top and lower O-rings. Other engines may use the configuration if the rail and bores match.

Can the ID1300-XDS 34mm Fuel Injectors support an E85 S58?

Yes, within the limits of the rest of the fuel system. Injector Dynamics designed the ID1300-XDS 34mm Fuel Injectors for alternative fuels, and they run on all of them. E85 calls for roughly a third more volume than gasoline, so check pump capacity and make sure the calibration uses the Injector Dynamics characterization data.

Why is a recalibration needed?

The engine management meters fuel by pulse width, based on the flow and offset of the injectors it expects. These injectors flow far more and open differently, so without new data the mixture would be badly wrong. Your tuner starts by loading the Injector Dynamics characterization data.

What should I know about warranty and filtration?

Injector Dynamics covers manufacturer defects for a year from purchase, but only when the injectors run the correct fuel through proper filtration, so fit a clean filter and flush the system when installing. Single injectors for the matched set come from Injector Dynamics.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Injector Dynamics ID1300-XDS 34mm Fuel Injectors with 14mm Top and Lower O-Rings, Set of 6

Injector Dynamics’ ID1300-XDS 34mm Fuel Injectors in a set of six cover a spread of six-cylinder engines that take the short 34mm body with 14mm top and lower O-rings, from the BMW S58 and the 2017-on Ford Raptor to the 2JZ-GTE Supra on a Radium fuel rail. Each injector flows 1335cc/min, a level suited to high-boost or ethanol builds rather than factory power. The ID1300-XDS was designed for alternative fuels while keeping a gasoline-compatible minimum fuel mass, so a car that still sees pump fuel can idle and cruise normally. A stock six on gasoline would barely use it.

Configuration

The 34mm length uses no top adapter; the 14mm top O-ring seals directly in the rail. On the Supra, Injector Dynamics lists this length only with a Radium rail, while its factory-rail Supra listings use 60mm injectors.

Features

Rated for every known fuel and designed specifically around alternative fuels such as E85 and methanol
Gasoline-compatible minimum fuel mass, so part-throttle fueling stays controllable
Flow matched as a set of six, with characterization data for the calibration

Specifications

Nominal flow: 1335cc/min at 3.0 bar (43.5 psi), iso-octane at 52C (125F)
Maximum differential fuel pressure: 7.0 bar (101.5 psi)
Fuel compatibility: All known fuels; designed specifically for alternative fuels
Electrical connector: USCAR
Body length: 34mm
Top: 14mm O-ring, no adapter
Lower: 14mm O-ring

What’s Included

ID1300-XDS fuel injectors with 14mm top and lower O-rings (x6)

Applications

Injector Dynamics lists the ID1300-XDS 34mm Fuel Injectors in this configuration for:

BMW: S58
Ford Raptor: 2017+
Hyundai Genesis: 2009-2012 | V6
Toyota Supra Turbo: 1993-1998 | 2JZ-GTE with Radium fuel rail

Notes

USCAR connectors are fitted, so EV1, OBD2 or Denso wiring needs adapters sold separately; for Denso plugs see the Injector Dynamics USCAR to Denso PnP Adapter
Plan on a tune, since the ECU needs the Injector Dynamics flow, offset and short pulse data loaded after installation
On the 1993-1998 Supra Turbo this set is listed only for cars with a Radium fuel rail

Frequently Asked Questions

Will this set fit a 2JZ-GTE Supra with the factory rail? No. Injector Dynamics lists this 34mm set for the 1993 to 1998 Supra Turbo only when it runs a Radium fuel rail. Supras on the factory rail are listed with 60mm injectors with either 11mm or 14mm tops. Check which rail your car has before ordering.
Which engines does this six-injector set cover? Injector Dynamics lists it for the BMW S58, the 2017 and later Ford Raptor, the 2009 to 2012 Hyundai Genesis V6 and the 2JZ-GTE Supra on a Radium rail. Each of those takes a 34mm injector with 14mm top and lower O-rings. Other engines may use the configuration if the rail and bores match.
Can the ID1300-XDS 34mm Fuel Injectors support an E85 S58? Yes, within the limits of the rest of the fuel system. Injector Dynamics designed the ID1300-XDS 34mm Fuel Injectors for alternative fuels, and they run on all of them. E85 calls for roughly a third more volume than gasoline, so check pump capacity and make sure the calibration uses the Injector Dynamics characterization data.
Why is a recalibration needed? The engine management meters fuel by pulse width, based on the flow and offset of the injectors it expects. These injectors flow far more and open differently, so without new data the mixture would be badly wrong. Your tuner starts by loading the Injector Dynamics characterization data.
What should I know about warranty and filtration? Injector Dynamics covers manufacturer defects for a year from purchase, but only when the injectors run the correct fuel through proper filtration, so fit a clean filter and flush the system when installing. Single injectors for the matched set come from Injector Dynamics.

About Injector Dynamics

Injector Dynamics is an Arizona injector specialist and an authorized technical partner of Bosch Motorsport, developing its injectors to its own specification rather than modifying production parts. It introduced slope and offset matching in 2007, and its Dual Slope Matching, developed by engineer Aaron Looft, extends matching into the short pulse widths that boosted and ethanol engines rely on. Its flow benches are built in house and calibrated against a NIST-traceable flow prover. Injector Dynamics supplied the emissions-compliant injectors for the twin-turbo Noble M600, and its injectors were fitted to the first seven-second Nissan GT-R and the first 300 mph motorcycle.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Injector Dynamics ID1300-XDS 34mm Fuel Injectors with 14mm Top and Lower O-Rings, Set of 6 [1300.34.14.14.6]

Guaranteed Safe Checkout

Injector Dynamics ID1300-XDS 34mm Fuel Injectors with 14mm Top and Lower O-Rings, Set of 6

Configuration

Features

Specifications

What’s Included

Applications

Notes

Frequently Asked Questions

About Injector Dynamics

Reviews