Does the ancillary hose kit for Toyota 4Runner trucks fit the 4.7L V8?

No. HPS lists part number 57-2281 for the 4.0L 1GR-FE V6 only, on the 2003-2009 Toyota 4Runner and the 2007-2009 FJ Cruiser. The 4.7L V8 4Runner is not on the HPS application list for this kit, so V8 owners need the HPS kit listed for that engine.

Will the kit fit a 2012 FJ Cruiser?

No. HPS lists part number 57-2281 for the 2007-2009 FJ Cruiser, including the TRD Special Edition and Trail Teams Special Edition trucks of those years. Later FJ Cruisers are not on the HPS application list for this kit, so check the HPS part number listed for the later model years before ordering.

Which hoses does the kit replace?

HPS states that the kit replaces the factory rubber upper and lower radiator hoses, the heater hoses, the ancillary hoses and the oil cooler coolant hoses, cross-referenced to eleven Toyota part numbers listed in the specifications. Stainless steel clamps are included. Coolant is not, so have enough ready to refill and bleed the system.

Will silicone hoses make the truck lose coolant?

Yes, slowly. HPS states that silicone hose has a water permeation rate 10 to 15 times greater than standard EPDM rubber hose, so a 4Runner or FJ Cruiser on these hoses can need an occasional top-up. HPS recommends checking the coolant level regularly whenever silicone coolant hoses are used on a daily-driven vehicle.

What temperature and pressure can the hoses handle?

HPS rates the ancillary hose kit for Toyota 4Runner and FJ Cruiser trucks to a maximum of 350F, or 177C, and says it withstands high temperature and high pressure in competition or daily driving. Each hose is 3-ply high temperature reinforced silicone, which HPS says meets or exceeds OE specifications.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

HPS Silicone Radiator, Heater and Ancillary Hose Kit for Toyota 4Runner and FJ Cruiser 4.0L V6

HPS’s Silicone Radiator, Heater and Ancillary Hose Kit for Toyota 4Runner and FJ Cruiser 4.0L V6 trucks goes beyond the radiator hoses to replace the heater hoses, the ancillary hoses and the oil cooler coolant hoses on the 1GR-FE. HPS cross-references eleven Toyota part numbers for the 2003-2009 4Runner and the 2007-2009 FJ Cruiser, all replaced in 3-ply reinforced silicone. It suits an owner who would rather renew the whole set at once than chase one failed hose after another.

Design and Performance

Because this ancillary hose kit for Toyota V6 trucks includes the oil cooler coolant hoses, a single drain and refill covers the lot. HPS says the silicone withstands high temperature and high pressure in competition or daily driving, with a 350F (177C) rating. For one weeping upper hose it is more than the job needs; for a truck still on original rubber, it is the sensible route.

Features

Replaces the upper and lower radiator hoses, heater hoses, ancillary hoses and oil cooler coolant hoses
Industrial grade stainless steel embossed clamps that will not cut through the silicone
Meets or exceeds OE specifications, according to HPS
Built by HPS to withstand high temperature and high pressure in competition or daily driving
Offered in black, blue or red

Specifications

Construction: 3-ply reinforced silicone
Maximum temperature rating: 350F (177C)
Weight: 5 lb
Shipping box: 16 x 10 x 6 in
Warranty: 2 years
HPS part number: 57-2281
Replaces OEM part numbers: 16571-31130, 16572-31170, 87245-3D490, 87245-3D480, 16267-0P030, 16261-AD010, 16281-0P010, 16282-0P010, 16264-AD010, 15777-31010, 15778-31010

What’s Included

HPS reinforced silicone radiator, heater, ancillary and oil cooler coolant hoses
HPS stainless steel non-perforated embossed hose clamps

Applications

Toyota 4Runner: N210 | 2003-2009 | 4.0L V6 1GR-FE
Toyota FJ Cruiser: XJ10 | 2007-2009 | 4.0L V6 1GR-FE

Notes

Sold as one complete radiator, heater and ancillary hose kit
This ancillary hose kit for Toyota 4Runner and FJ Cruiser models is listed by HPS for the 4.0L V6 only, and not for 2010 and later trucks
HPS states that silicone hose permeates water at 10 to 15 times the rate of EPDM rubber, so check the coolant level regularly on a daily driver

Frequently Asked Questions

Does the ancillary hose kit for Toyota 4Runner trucks fit the 4.7L V8? No. HPS lists part number 57-2281 for the 4.0L 1GR-FE V6 only, on the 2003-2009 Toyota 4Runner and the 2007-2009 FJ Cruiser. The 4.7L V8 4Runner is not on the HPS application list for this kit, so V8 owners need the HPS kit listed for that engine.
Will the kit fit a 2012 FJ Cruiser? No. HPS lists part number 57-2281 for the 2007-2009 FJ Cruiser, including the TRD Special Edition and Trail Teams Special Edition trucks of those years. Later FJ Cruisers are not on the HPS application list for this kit, so check the HPS part number listed for the later model years before ordering.
Which hoses does the kit replace? HPS states that the kit replaces the factory rubber upper and lower radiator hoses, the heater hoses, the ancillary hoses and the oil cooler coolant hoses, cross-referenced to eleven Toyota part numbers listed in the specifications. Stainless steel clamps are included. Coolant is not, so have enough ready to refill and bleed the system.
Will silicone hoses make the truck lose coolant? Yes, slowly. HPS states that silicone hose has a water permeation rate 10 to 15 times greater than standard EPDM rubber hose, so a 4Runner or FJ Cruiser on these hoses can need an occasional top-up. HPS recommends checking the coolant level regularly whenever silicone coolant hoses are used on a daily-driven vehicle.
What temperature and pressure can the hoses handle? HPS rates the ancillary hose kit for Toyota 4Runner and FJ Cruiser trucks to a maximum of 350F, or 177C, and says it withstands high temperature and high pressure in competition or daily driving. Each hose is 3-ply high temperature reinforced silicone, which HPS says meets or exceeds OE specifications.

About HPS Performance

HPS Performance is a California manufacturer based in Irwindale, with more than 5,000 parts in metric and standard sizes, from reinforced silicone hoses and stainless steel clamps to aluminum intake tubing and complete air intake kits. Its multi-ply hoses are built to the SAE J20 coolant hose standard, and new kits are developed with SolidWorks CAD modelling, 3D scanning, CNC machining and dyno testing. HPS lists a two-year warranty on its intake and hose kits.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

HPS Silicone Radiator, Heater and Ancillary Hose Kit for Toyota 4Runner and FJ Cruiser 4.0L V6

Guaranteed Safe Checkout

HPS Silicone Radiator, Heater and Ancillary Hose Kit for Toyota 4Runner and FJ Cruiser 4.0L V6

Design and Performance

Features

Specifications

What’s Included

Applications

Notes

Frequently Asked Questions

About HPS Performance

Reviews