Does the Hi-Power Single-Exit Exhaust for ZN6 also fit the Subaru BRZ?

Yes. The HKS Hi-Power Single-Exit Exhaust for ZN6 cars, part 32016-BT003, is also listed for the ZC6 Subaru BRZ from 2013 to 2020, as well as the Scion FR-S and Toyota 86, all with the FA20 engine. It is not listed for the 2022 and later GR86 or BRZ with the FA24, which need their own HKS exhaust part.

How loud is the HKS Hi-Power single exit on an 86 or BRZ?

HKS measured 90 dB on its close test for this system, against 86 dB for the factory system, and 77 dB at idle. HKS does not publish a highway cruise figure. A 4 dB rise on the close test is a moderate change on paper, and the large silencer is there to keep the tone comfortable.

Can the tip position be adjusted?

Yes. HKS notes that the titanium tail of part 32016-BT003 can slide through 20mm, which lets the installer set how far the tip sits relative to the rear bumper. That helps on cars with an aftermarket rear bumper or diffuser, and the tail should be set before the system is finally tightened.

What is the exhaust made from?

HKS builds the Hi-Power Single-Exit Exhaust for ZN6 cars from S409 stainless steel and finishes it with a titanium tail. The center pipe measures 75mm at its largest point, and HKS lists the tip at 119mm in its specification table, although its product remarks give 97mm.

How much ground clearance does the exhaust have?

HKS lists 120mm of minimum road clearance at the mid pipe, measured on stock suspension from the lowest point of the kit to the road. Actual clearance can differ from vehicle to vehicle, so owners on lowering springs or coilovers should measure their own car before ordering.

Is this exhaust a one-piece system?

No. HKS supplies the Hi-Power single exit as three pieces, which makes the system easier to lift into place under the car. A second set of hands helps while the sections are lined up, and HKS notes that hooks, brackets and stays may change without prior notice.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

HKS Hi-Power Single-Exit Exhaust for ZN6 Toyota 86, Scion FR-S and ZC6 Subaru BRZ

The HKS Hi-Power Single-Exit Exhaust for ZN6 and ZC6 cars is the single-outlet, silenced version of the Hi-Power muffler for the FA20 Toyota 86, Scion FR-S and Subaru BRZ, built from S409 stainless around a 75mm straight-through pipe and finished with a titanium tail. HKS measured it at 90 dB on the close test against 86 dB for the factory system, and 77 dB at idle, a moderate step that suits owners who want more voice from the flat four without chasing the loudest option. Owners set on a dual-tip rear should choose a dual-exit HKS system instead.

Features

Straight-through layout that HKS designed to keep flow restriction low at any tuning level
Large silencer section that HKS uses to bring engine sound down to a comfortable level
Titanium tail that slides through 20mm, so the tip position can be set to suit the rear bumper
Three-piece construction for easier handling during installation

Specifications

Center Pipe Diameter: 75mm at its largest point
Tip Diameter: 119mm, per the HKS specification table
Main Material: S409 stainless steel
Tail: Titanium, 20mm slide
Construction: 3 pieces
Close Sound Level, Factory System: 86 dB, HKS measurement
Close Sound Level, HKS: 90 dB, HKS measurement
Idle Sound Level, HKS: 77 dB, HKS measurement
Minimum Road Clearance: 120mm at the mid pipe, stock suspension

Applications

Scion FR-S: ZN6 | 2013-2016 | FA20
Subaru BRZ: ZC6 | 2013-2020 | FA20
Toyota 86: ZN6 | 2017-2020 | FA20

Notes

HKS lists the Hi-Power Single-Exit Exhaust for ZN6 and ZC6 cars for the FA20 generation only; it is not listed for the 2022 and later FA24 GR86 or BRZ
HKS gives the tip as 119mm in its specification table and 97mm in its product remarks; this listing uses the specification table figure
HKS measures road clearance between the lowest point of the kit and the road surface on stock suspension, and measures the center pipe at its largest diameter, excluding the silencer and tip
Sound levels are HKS measurements, and real-world volume varies with the vehicle, tires, modifications and road surface
Set the tail position within its 20mm slide range before the final tightening of the system

Frequently Asked Questions

Does the Hi-Power Single-Exit Exhaust for ZN6 also fit the Subaru BRZ? Yes. The HKS Hi-Power Single-Exit Exhaust for ZN6 cars, part 32016-BT003, is also listed for the ZC6 Subaru BRZ from 2013 to 2020, as well as the Scion FR-S and Toyota 86, all with the FA20 engine. It is not listed for the 2022 and later GR86 or BRZ with the FA24, which need their own HKS exhaust part.
How loud is the HKS Hi-Power single exit on an 86 or BRZ? HKS measured 90 dB on its close test for this system, against 86 dB for the factory system, and 77 dB at idle. HKS does not publish a highway cruise figure. A 4 dB rise on the close test is a moderate change on paper, and the large silencer is there to keep the tone comfortable.
Can the tip position be adjusted? Yes. HKS notes that the titanium tail of part 32016-BT003 can slide through 20mm, which lets the installer set how far the tip sits relative to the rear bumper. That helps on cars with an aftermarket rear bumper or diffuser, and the tail should be set before the system is finally tightened.
What is the exhaust made from? HKS builds the Hi-Power Single-Exit Exhaust for ZN6 cars from S409 stainless steel and finishes it with a titanium tail. The center pipe measures 75mm at its largest point, and HKS lists the tip at 119mm in its specification table, although its product remarks give 97mm.
How much ground clearance does the exhaust have? HKS lists 120mm of minimum road clearance at the mid pipe, measured on stock suspension from the lowest point of the kit to the road. Actual clearance can differ from vehicle to vehicle, so owners on lowering springs or coilovers should measure their own car before ordering.
Is this exhaust a one-piece system? No. HKS supplies the Hi-Power single exit as three pieces, which makes the system easier to lift into place under the car. A second set of hands helps while the sections are lined up, and HKS notes that hooks, brackets and stays may change without prior notice.

About HKS

HKS is a Japanese performance engineering brand founded in 1973 and headquartered in Fujinomiya, Shizuoka, with a long-standing reputation for developing high-quality aftermarket parts and motorsport-proven technology for enthusiast and professional applications. Known for innovations in turbocharging and engine performance, HKS produces a broad range of components including exhaust systems, turbo kits, electronics / engine management, and suspension solutions, with product development heavily influenced by decades of involvement in racing disciplines such as circuit time attack, drag, and drifting.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

HKS Hi-Power Single-Exit Exhaust for ZN6 Toyota 86, Scion FR-S and ZC6 Subaru BRZ [32016-BT003]

Guaranteed Safe Checkout

HKS Hi-Power Single-Exit Exhaust for ZN6 Toyota 86, Scion FR-S and ZC6 Subaru BRZ

Features

Specifications

Applications

Notes

Frequently Asked Questions

About HKS

Reviews