HKS MAX IV SP DRAG Coilover Kit for A90 Toyota Supra GR

HKS MAX IV SP DRAG Coilover Kit for A90 Toyota Supra GR

Return of Drag Specification Dampers

• Introducing the latest technologies to suit modern drag racing requirements. The drag suspension designed based on HIPERMAX II Drag Suspension. Parts such 300mm long spring, helper spring, etc. are selected for each vehicle model to maintain sufficient stroke amount and traction. The shock-body length adjustable type is chosen to widen the vehicle height setting range and stroke distribution. This drag suspension guarantees its performance in drag race.

Single Tube Damper Design

• Mono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride.

Dust Boot

• Protect the Shaft from the Flying Stones

PNE Coating

• Using this special surface coating provides 5 times better durability over standard galvanizing. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.

M Shaft

• With the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. HKS mainly adopted this to the rear damper so that the driver can have a better driving experience.

Adopted Pillow Ball Upper Mount

• For More Accurate and Sharp Steering

New Design Needle

• Newly Designed Needle Has Been Used to Revise the Very Low Speed & Middle & High Speed Dampening Which is Key to a Comfort Ride

Reduction of Unsprung Weight

• In Order to Reduce Unsprung Weight, Bracket, Ride Height Adjusters & Lock Nuts are Made from Aluminum (not for all vehicles)

30 Step Damping Force Adjustment

• 30 Levels of Dampening Adjustment Allow Fine Tune Adjustment for Street, Circuit Winding Roads, Highway, or the Weight of the Vehicle

Notes

• This product is designed for drag racing. Please be careful when you drive on public roads.