Does the Fabspeed XperTune Performance Software fit my 987.2 Boxster or Cayman?

Yes. The Fabspeed XperTune Performance Software fits the 2009-2012 Porsche Boxster, Boxster S, Cayman, and Cayman S of the 987.2 generation, covering both the 2.9L and 3.4L direct-injection flat-six. It is a custom calibration flashed through the car's OBD-II port, so it works on any of these models without hardware changes.

How much power does XperTune add?

On the 2.9L Boxster and Cayman, XperTune takes the engine from 256 to 274 horsepower and 214 to 229 ft-lbs of torque. On the 3.4L Boxster S and Cayman S, it climbs from 310 to 337 horsepower and 266 to 281 ft-lbs. The tune also sharpens throttle response and smooths delivery across the rev range.

How is the tune installed?

You read your car's factory data through the OBD-II port with the included handheld programmer, send it to Fabspeed, and receive a custom tune within one to two business days. You then flash the tune with the same handheld. There is no ECU removal and no bench flashing, but you do need a Windows PC for the process.

Is the tune reversible, and will it affect my car?

Yes, XperTune can flash your car back to the factory calibration at any time, so the change is fully reversible. The handheld marries to one vehicle, and Fabspeed builds the tune to add power while keeping drivability and reliability intact. Many owners flash back to stock before dealer service and reflash afterward.

Do I need other modifications for the tune to work?

No, XperTune works on an otherwise stock 987.2 and delivers the quoted gains on its own. It also pairs well with bolt-on hardware like a Fabspeed exhaust or headers, and the calibration can be built to take advantage of those parts. If you add hardware later, Fabspeed can revise the tune to suit.

Can I flash the tune with a Mac?

No, the XperTune flashing process requires a Windows PC; Mac is not supported. You will also need access to your car's OBD-II port and the included handheld programmer. Once the handheld is married to your vehicle, it is tied to that car, so plan to keep it with the vehicle.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Fabspeed XperTune Performance Software for 987.2 Porsche Boxster and Cayman

Fabspeed’s XperTune Performance Software for the 987.2 Porsche Boxster and Cayman is the single most cost-effective way to wake up the direct-injection flat-six, a custom ECU calibration flashed through the car’s own OBD-II port with no hardware to install. Developed by Fabspeed’s tuning team in Fort Washington, Pennsylvania, the calibration re-maps air-fuel ratios, timing, and throttle response for real, measurable gains: up to 18 horsepower on the 2.9L Boxster and Cayman and 27 horsepower on the 3.4L S, along with sharper drivability throughout the rev range. It is delivered on a handheld programmer that reads your car’s stock data, receives a tune built for your exact vehicle, and writes it in minutes, and it can be flashed back to stock at any time. For the 987.2 owner who wants more power without opening the engine bay, this is the place to start.

Features

Fully custom ECU calibration built for your exact vehicle
Up to +18 hp on the 2.9L and +27 hp on the 3.4L S
Flashed through the factory OBD-II port, no ECU removal or bench flashing
Handheld programmer included
Reversible to the factory calibration at any time
Sharper throttle response and smoother power delivery
Custom tune delivered in 1 to 2 business days

Specifications

Boxster / Cayman (2.9L): 256 to 274 hp (+18), 214 to 229 ft-lbs (+15)
Boxster S / Cayman S (3.4L): 310 to 337 hp (+27), 266 to 281 ft-lbs (+15)
Delivery method: Handheld OBD-II programmer
Tune turnaround: 1 to 2 business days
Reversibility: Flash back to stock at any time
Requirement: Windows PC (Mac not supported)

Applications

Porsche Boxster: 987.2 | 2009-2012 | 2.9L F6
Porsche Boxster S: 987.2 | 2009-2012 | 3.4L F6
Porsche Cayman: 987.2 | 2009-2012 | 2.9L F6
Porsche Cayman S: 987.2 | 2009-2012 | 3.4L F6

Notes

Flashing requires a Windows PC; the handheld programmer marries to a single vehicle
A custom tune is built per vehicle and delivered in 1 to 2 business days after you submit your car’s stock data
The tune can be flashed back to the factory calibration at any time
Ships in approximately one week, often sooner
Pairs well with Fabspeed 987.2 exhaust and headers, which the tune can be calibrated to suit

Frequently Asked Questions

Does the Fabspeed XperTune Performance Software fit my 987.2 Boxster or Cayman? Yes. The Fabspeed XperTune Performance Software fits the 2009-2012 Porsche Boxster, Boxster S, Cayman, and Cayman S of the 987.2 generation, covering both the 2.9L and 3.4L direct-injection flat-six. It is a custom calibration flashed through the car’s OBD-II port, so it works on any of these models without hardware changes.
How much power does XperTune add? On the 2.9L Boxster and Cayman, XperTune takes the engine from 256 to 274 horsepower and 214 to 229 ft-lbs of torque. On the 3.4L Boxster S and Cayman S, it climbs from 310 to 337 horsepower and 266 to 281 ft-lbs. The tune also sharpens throttle response and smooths delivery across the rev range.
How is the tune installed? You read your car’s factory data through the OBD-II port with the included handheld programmer, send it to Fabspeed, and receive a custom tune within one to two business days. You then flash the tune with the same handheld. There is no ECU removal and no bench flashing, but you do need a Windows PC for the process.
Is the tune reversible, and will it affect my car? Yes, XperTune can flash your car back to the factory calibration at any time, so the change is fully reversible. The handheld marries to one vehicle, and Fabspeed builds the tune to add power while keeping drivability and reliability intact. Many owners flash back to stock before dealer service and reflash afterward.
Do I need other modifications for the tune to work? No, XperTune works on an otherwise stock 987.2 and delivers the quoted gains on its own. It also pairs well with bolt-on hardware like a Fabspeed exhaust or headers, and the calibration can be built to take advantage of those parts. If you add hardware later, Fabspeed can revise the tune to suit.
Can I flash the tune with a Mac? No, the XperTune flashing process requires a Windows PC; Mac is not supported. You will also need access to your car’s OBD-II port and the included handheld programmer. Once the handheld is married to your vehicle, it is tied to that car, so plan to keep it with the vehicle.

About Fabspeed

Fabspeed Motorsport has designed, built, and tuned performance hardware in Fort Washington, Pennsylvania since 1992, from a 26,000-square-foot facility where every product is engineered, dyno-tested, and validated in-house. Working across exhaust systems, headers, and custom ECU calibration, and with decades of Porsche, Ferrari, Lamborghini, and McLaren development behind it, Fabspeed builds race-proven performance you can trust on the street.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Fabspeed XperTune Performance Software for 987.2 Porsche Boxster / S and Cayman / S [FS.POR.9872.ET]

Guaranteed Safe Checkout

Fabspeed XperTune Performance Software for 987.2 Porsche Boxster and Cayman

Features

Specifications

Applications

Notes

Frequently Asked Questions

About Fabspeed

Reviews