Which cars do the Fabspeed Sport Headers for 996 Porsche 911 Turbo fit?

They fit the 996 Porsche 911 Turbo and Turbo S built from 2000 to 2005 with the 3.6-liter twin-turbo flat-six. They are a direct replacement for the factory headers and bolt into the stock location. They are engineered for that Mezger engine, so they are not designed for the later 997 Turbo, which uses a different header layout.

How much power do the headers add?

On Fabspeed's dyno the Sport Headers add 12 wheel horsepower and 14 lb-ft of torque over the factory headers and cut about 3 pounds. The gains come from equal-length primaries and 3-into-1 merge collectors that flow better than the cast factory manifolds. You feel the difference most in throttle response and mid-range pull.

What are the Fabspeed headers made from?

Each set is CNC mandrel-bent from 14-16 gauge T304L stainless steel, a low-carbon grade chosen to resist cracking and corrosion under sustained turbo heat. The primary tubes are cut to equal length and formed as one piece, then gathered into high-velocity 3-into-1 merge collectors. That construction keeps exhaust gas moving quickly and evenly toward the turbochargers.

What do I need to install these headers?

The Sport Headers for 996 bolt into the factory header location, but they do not include gaskets, so plan to fit fresh factory OEM header gaskets during the job. After the first heat cycle you should re-torque all exhaust bolts to the factory specification. Professional installation is recommended for a proper seal.

Will the headers set a check engine light, and are they street legal?

Fabspeed tunes the headers to run with no check engine light. They are not CARB approved, however, so they are not for sale in California or other states that require CARB certification. Emissions rules vary by state, so check your local requirements before buying.

Are the Fabspeed headers covered by a warranty?

Yes. Every set is backed by the Fabspeed Lifetime Warranty, the same coverage Fabspeed puts on its full exhaust line. Because the headers are hand-built in the USA from T304L stainless at Fabspeed's Fort Washington, Pennsylvania facility, they are made to outlast the car rather than a set number of years.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Fabspeed Sport Headers for 996 Porsche 911 Turbo

Fabspeed’s Sport Headers for 996 Porsche 911 Turbo replace the restrictive cast factory headers on the first water-cooled 911 Turbo with free-flowing stainless hardware that adds real, dyno-proven power. Fabspeed has designed and dyno-developed Porsche exhausts for more than thirty years in its own Fort Washington, Pennsylvania facility, machining every part in-house and testing it on the dyno and the road before it ships. These headers are built from 14-16 gauge T304L stainless steel with equal-length, one-piece CNC mandrel-bent primary tubes feeding high-velocity 3-into-1 merge collectors, and on Fabspeed’s dyno they are good for 12 additional wheel horsepower and 14 lb-ft of torque while trimming 3 pounds. They bolt into the factory location as a direct replacement, run without a check engine light, and carry the Fabspeed lifetime warranty. This is the upgrade a 996 Turbo owner reaches for when the factory manifolds have become the restriction between the engine and its turbochargers.

Features

Equal-length, one-piece CNC mandrel-bent primary tubes
High-velocity 3-into-1 merge collectors
Direct replacement for the restrictive factory headers
Tuned to run with no check engine light
Backed by the Fabspeed Lifetime Warranty
Made in the USA at Fabspeed’s Fort Washington facility

Specifications

Material: T304L stainless steel
Gauge: 14-16 gauge
Horsepower gain: +12 wheel horsepower (on Fabspeed’s dyno)
Torque gain: +14 lb-ft (on Fabspeed’s dyno)
Weight savings: 3 pounds

Applications

Porsche 911 Turbo: 996 | 2000-2005 | 3.6L Twin-Turbo Flat-Six

Notes

Requires reuse of the factory OEM header gaskets, which are not included
After the initial heat cycle, tighten all exhaust bolts to the factory torque specification
The Sport Headers for 996 are not CARB approved and are not for sale in California or other states that require CARB certification
Pairs with Fabspeed’s 996 Turbo exhaust systems for more flow downstream (link the anchor “Fabspeed’s 996 Turbo exhaust systems” to the BA Fabspeed 996 Turbo exhaust range)
Built to order and typically ships within one week

Frequently Asked Questions

Which cars do the Fabspeed Sport Headers for 996 Porsche 911 Turbo fit? They fit the 996 Porsche 911 Turbo and Turbo S built from 2000 to 2005 with the 3.6-liter twin-turbo flat-six. They are a direct replacement for the factory headers and bolt into the stock location. They are engineered for that Mezger engine, so they are not designed for the later 997 Turbo, which uses a different header layout.
How much power do the headers add? On Fabspeed’s dyno the Sport Headers add 12 wheel horsepower and 14 lb-ft of torque over the factory headers and cut about 3 pounds. The gains come from equal-length primaries and 3-into-1 merge collectors that flow better than the cast factory manifolds. You feel the difference most in throttle response and mid-range pull.
What are the Fabspeed headers made from? Each set is CNC mandrel-bent from 14-16 gauge T304L stainless steel, a low-carbon grade chosen to resist cracking and corrosion under sustained turbo heat. The primary tubes are cut to equal length and formed as one piece, then gathered into high-velocity 3-into-1 merge collectors. That construction keeps exhaust gas moving quickly and evenly toward the turbochargers.
What do I need to install these headers? The Sport Headers for 996 bolt into the factory header location, but they do not include gaskets, so plan to fit fresh factory OEM header gaskets during the job. After the first heat cycle you should re-torque all exhaust bolts to the factory specification. Professional installation is recommended for a proper seal.
Will the headers set a check engine light, and are they street legal? Fabspeed tunes the headers to run with no check engine light. They are not CARB approved, however, so they are not for sale in California or other states that require CARB certification. Emissions rules vary by state, so check your local requirements before buying.
Are the Fabspeed headers covered by a warranty? Yes. Every set is backed by the Fabspeed Lifetime Warranty, the same coverage Fabspeed puts on its full exhaust line. Because the headers are hand-built in the USA from T304L stainless at Fabspeed’s Fort Washington, Pennsylvania facility, they are made to outlast the car rather than a set number of years.

About Fabspeed

Fabspeed Motorsport has designed and built performance exhaust systems and tuning hardware for the world’s finest cars for more than thirty years. From its 26,000-square-foot facility in Fort Washington, Pennsylvania, Fabspeed designs, machines, dyno-develops, and road and race tests every product in-house, using aerospace-grade CNC equipment once run by names like Boeing and Grumman. That obsession with fit and finish has made Fabspeed a trusted name among Porsche, Ferrari, McLaren, and Lamborghini owners, and every part it ships is backed by the industry’s best lifetime warranty.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Fabspeed Sport Headers for 996 Porsche 911 Turbo [FS.POR.996T.SHDR]

Guaranteed Safe Checkout

Fabspeed Sport Headers for 996 Porsche 911 Turbo

Features

Specifications

Applications

Notes

Frequently Asked Questions

About Fabspeed

Reviews