Do the Fabspeed Secondary Race Pipes fit my 957 Cayenne Turbo or Turbo S?

Yes. They fit the 2008 to 2010 Porsche Cayenne Turbo and Turbo S with the 4.8-liter twin-turbo V8. The pipes install in the secondary section and are a direct bolt-on for both models, so a single part covers the Turbo and the higher-output Turbo S.

How much power do they add?

Fabspeed rates them at 27 wheel horsepower and 22 lb-ft of torque over the factory system, along with a weight saving of roughly 24 pounds. The straight-through design opens up flow through the most restrictive part of the factory exhaust, which is where those gains and the stronger throttle response come from.

How do they change the exhaust sound?

They add a noticeably more aggressive, exotic note. The straight-through stainless pipes let the 4.8-liter twin-turbo V8 breathe and project far more than the muted factory system, so the Cayenne Turbo sounds closer to a performance car than a quiet luxury SUV, with the most difference under hard acceleration.

Are these street legal?

No. They are strictly intended for closed-course and off-road use and are not CARB-certified or EPA-certified. They are not sold for installation on a vehicle driven on public roads in California or other states that require emissions certification, and it is the buyer's responsibility to use them lawfully.

Will they set a check engine light, and do I need a tune?

On a street-driven vehicle they can set a check engine light. Pairing them with the Fabspeed XperTune Performance Software for the 957 Cayenne Turbo retunes the engine for the freer-flowing setup and is the recommended way to run the pipes, which also lets the engine take full advantage of the added flow.

What are the Fabspeed Secondary Race Pipes made from, and are they bolt-on?

They are fabricated from polished T304L stainless steel as a straight-through design, and they install as a direct bolt-on in the secondary section of the factory exhaust. The stainless construction is lighter and more durable than the factory pieces, and most owners have them fitted by an exhaust shop or Porsche specialist.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Fabspeed Secondary Race Pipes for 957 Porsche Cayenne Turbo

Fabspeed’s Secondary Race Pipes for the 957 Porsche Cayenne Turbo free the twin-turbo V8 from the most restrictive section of its factory exhaust. Fabricated from polished T304L stainless steel as straight-through pipes, they are built and finished in-house at Fabspeed’s Fort Washington, Pennsylvania facility, where every component is engineered, fabricated, and validated under one roof. Compared to the factory system they flow far more freely and shed weight, adding 27 wheel horsepower and 22 lb-ft while trimming roughly 24 pounds, and they give the Cayenne Turbo an aggressive, exotic exhaust note to match the performance. For the owner who takes this vehicle to closed-course and off-road events, they are a precise, lifetime-warrantied upgrade engineered specifically for the 4.8-liter twin-turbo V8.

Features

Fabricated from polished T304L stainless steel
Straight-through secondary race pipe design for maximum flow
Adds 27 wheel horsepower and 22 lb-ft of torque
A weight reduction of roughly 24 pounds compared to the factory system
Aggressive, exotic exhaust note
Direct bolt-on installation
Backed by the Fabspeed Lifetime Warranty

Applications

Porsche Cayenne Turbo: 957 | 2008-2010 | 4.8L Twin-Turbo V8
Porsche Cayenne Turbo S: 957 | 2008-2010 | 4.8L Twin-Turbo V8

Notes

These secondary race pipes are strictly for closed-course and off-road use only
They are not CARB-certified or EPA-certified and are not sold for installation on vehicles operated on public roads in California or other states requiring certification
Removing restriction from the secondary section can set a check engine light on a street-driven vehicle, so pair the pipes with the Fabspeed XperTune Performance Software for the 957 Cayenne Turbo (SKU FS.POR.957T.ET) to retune the engine
Sold as a complete pair
Every Fabspeed system is backed by the Fabspeed Lifetime Warranty

Frequently Asked Questions

Do the Fabspeed Secondary Race Pipes fit my 957 Cayenne Turbo or Turbo S? Yes. They fit the 2008 to 2010 Porsche Cayenne Turbo and Turbo S with the 4.8-liter twin-turbo V8. The pipes install in the secondary section and are a direct bolt-on for both models, so a single part covers the Turbo and the higher-output Turbo S.
How much power do they add? Fabspeed rates them at 27 wheel horsepower and 22 lb-ft of torque over the factory system, along with a weight saving of roughly 24 pounds. The straight-through design opens up flow through the most restrictive part of the factory exhaust, which is where those gains and the stronger throttle response come from.
How do they change the exhaust sound? They add a noticeably more aggressive, exotic note. The straight-through stainless pipes let the 4.8-liter twin-turbo V8 breathe and project far more than the muted factory system, so the Cayenne Turbo sounds closer to a performance car than a quiet luxury SUV, with the most difference under hard acceleration.
Are these street legal? No. They are strictly intended for closed-course and off-road use and are not CARB-certified or EPA-certified. They are not sold for installation on a vehicle driven on public roads in California or other states that require emissions certification, and it is the buyer’s responsibility to use them lawfully.
Will they set a check engine light, and do I need a tune? On a street-driven vehicle they can set a check engine light. Pairing them with the Fabspeed XperTune Performance Software for the 957 Cayenne Turbo retunes the engine for the freer-flowing setup and is the recommended way to run the pipes, which also lets the engine take full advantage of the added flow.
What are the Fabspeed Secondary Race Pipes made from, and are they bolt-on? They are fabricated from polished T304L stainless steel as a straight-through design, and they install as a direct bolt-on in the secondary section of the factory exhaust. The stainless construction is lighter and more durable than the factory pieces, and most owners have them fitted by an exhaust shop or Porsche specialist.

About Fabspeed

Fabspeed Motorsport designs and builds performance exhaust and engine systems at its headquarters in Fort Washington, Pennsylvania. Inside a 26,000 square foot facility, the company runs the full development cycle in-house, from design and engineering through fabrication, dyno testing, and performance validation, and supports Porsche, Ferrari, McLaren, and Lamborghini owners and clubs. Every Fabspeed system is handcrafted in the United States and backed by the Fabspeed Lifetime Warranty.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Fabspeed Secondary Race Pipes for 957 Porsche Cayenne Turbo [FS.POR.957T.CB]

Guaranteed Safe Checkout

Fabspeed Secondary Race Pipes for 957 Porsche Cayenne Turbo

Features

Applications

Notes

Frequently Asked Questions

About Fabspeed

Reviews