Do the Fabspeed Secondary Competition Link Pipes fit my Murciélago?

They fit all Lamborghini Murciélago from 2001-2010, both the 6.2L V12 cars from 2001-2006 and the LP640 6.5L V12 cars from 2007-2010. They install as a direct DIY bolt-on with no cutting or welding, working with the factory rear muffler. These are built for closed-course competition and off-road use, not for street driving.

What do they do, and how much do they add?

The Secondary Competition Link Pipes open up exhaust flow in the secondary position for a measured gain of 40 hp and 35 ft-lbs, taken from one vehicle under ambient conditions, so results vary. They also save 25 lbs and give the V12 a louder, higher-pitched tone, with more throttle response than the restrictive factory section.

What are they made from?

Fabspeed builds the pipes from CNC mandrel-bent T304L stainless steel for strength, clean flow, and a precise fit. The stainless construction stands up to sustained track heat, and the pipes are backed by Fabspeed's lifetime warranty.

How loud are they, and is there drone?

They make the Murciélago louder and higher-pitched than stock, with more edge at full throttle, but they are tuned to avoid interior drone. Because they work alongside the factory rear muffler, the increase is focused on the secondary section rather than replacing the whole exhaust.

Is installation difficult?

No. The pipes are a simple DIY bolt-on that needs no cutting or welding and installs at Level-1 difficulty using the factory mounting points. Because they are built for competition and off-road use, they may trigger a check engine light on OBD2 vehicles once fitted.

Are they street legal and CARB compliant?

No. These are race pipes intended for closed-course competition and off-road use only. They are not CARB approved and are not for sale in California or other states that require CARB certification. For a street-legal setup, choose a Sport Cats option instead, and confirm your local requirements before purchasing.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Fabspeed Secondary Competition Link Pipes for Lamborghini Murciélago

Fabspeed’s Secondary Competition Link Pipes for the Lamborghini Murciélago open up the V12’s exhaust in the secondary position for more flow on track. Fabspeed Motorsport builds the pipes in-house in Fort Washington, Pennsylvania, from CNC mandrel-bent T304L stainless steel, replacing the heavy, restrictive factory section with a clean, free-flowing path. They improve horsepower, torque, and throttle response, with a measured gain of 40 hp and 35 ft-lbs, trim 25 lbs off the car, and give the V12 a louder, higher-pitched voice with no interior drone. They bolt in without cutting or welding and work with the factory rear muffler. These are race pipes, built for closed-course competition and off-road use, for the Murciélago owner who takes the car where that volume belongs.

Features

Secondary-position link pipes that open up exhaust flow
Mandrel-bent T304L stainless steel construction
Adds 40 hp and 35 ft-lbs (measured on one vehicle; results vary)
Saves 25 lbs compared to the Factory Equipment
Louder, higher-pitched exhaust note with no interior drone
Works with the factory rear muffler
Simple DIY bolt-on installation; no cutting or welding, Level-1 install difficulty
Built for closed-course competition and off-road use only
Lifetime warranty

Applications

Lamborghini Murciélago: 2001-2006 | 6.2L V12
Lamborghini Murciélago LP640: 2007-2010 | 6.5L V12

Notes

These are race pipes for closed-course competition and off-road use only, and may trigger a check engine light on OBD2 vehicles
Not CARB approved; not for sale in California or other states that require CARB certification
Street-driven Murciélago owners should choose a street-legal Sport Cats option instead
Special order item; expected to ship within one week of order

Frequently Asked Questions

Do the Fabspeed Secondary Competition Link Pipes fit my Murciélago? They fit all Lamborghini Murciélago from 2001-2010, both the 6.2L V12 cars from 2001-2006 and the LP640 6.5L V12 cars from 2007-2010. They install as a direct DIY bolt-on with no cutting or welding, working with the factory rear muffler. These are built for closed-course competition and off-road use, not for street driving.
What do they do, and how much do they add? The Secondary Competition Link Pipes open up exhaust flow in the secondary position for a measured gain of 40 hp and 35 ft-lbs, taken from one vehicle under ambient conditions, so results vary. They also save 25 lbs and give the V12 a louder, higher-pitched tone, with more throttle response than the restrictive factory section.
What are they made from? Fabspeed builds the pipes from CNC mandrel-bent T304L stainless steel for strength, clean flow, and a precise fit. The stainless construction stands up to sustained track heat, and the pipes are backed by Fabspeed’s lifetime warranty.
How loud are they, and is there drone? They make the Murciélago louder and higher-pitched than stock, with more edge at full throttle, but they are tuned to avoid interior drone. Because they work alongside the factory rear muffler, the increase is focused on the secondary section rather than replacing the whole exhaust.
Is installation difficult? No. The pipes are a simple DIY bolt-on that needs no cutting or welding and installs at Level-1 difficulty using the factory mounting points. Because they are built for competition and off-road use, they may trigger a check engine light on OBD2 vehicles once fitted.
Are they street legal and CARB compliant? No. These are race pipes intended for closed-course competition and off-road use only. They are not CARB approved and are not for sale in California or other states that require CARB certification. For a street-legal setup, choose a Sport Cats option instead, and confirm your local requirements before purchasing.

About Fabspeed

Fabspeed Motorsport designs, develops, and manufactures performance exhaust systems and engineering hardware at its 26,000 square foot facility in Fort Washington, Pennsylvania. Fabspeed runs the complete development cycle in-house, from design and fabrication through dyno testing and on-track assessment, using aerospace-grade materials and mandrel-bent stainless construction. The result is hardware engineered to add power and character while fitting like original equipment, backed by a lifetime warranty.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.