Will the Fabspeed Right-Side Tip for 964 fit my Porsche 911 Carrera?

Yes. The Right-Side Tip for 964 fits every 964 Carrera built from 1989 to 1994, coupes, cabriolets and targas alike, along with the Carrera RS, RS America and Speedster. It replaces the factory right-side outlet directly and reuses the Porsche ball and socket clamp, so no cutting, welding or adapters are needed to fit it.

Does this tip only work with the stock muffler?

No. Fabspeed builds it to bolt to the stock 964 secondary right rear muffler or to any 964 secondary Cup-style muffler bypass pipe, including the Fabspeed Secondary Muffler Bypass. Owners who have already fitted a bypass pipe can run this tip on it and keep a finished outlet at the valance rather than an exposed pipe end.

Is this sold as a pair?

No. It is sold individually as a single right-side tip, because the 964 Carrera runs one outlet on the right and this piece replaces that outlet. Owners of the 964 Turbo need the dual C2 Turbo tip set instead, which is a separate part and a separate fitment.

What size is the tip and what is it made from?

The outlet measures 4.5 inches in oval form and the tip is mandrel-bent T304L stainless steel, mirror polished and lined through the mouth. T304L is the same grade Fabspeed uses in its exhaust systems, chosen for corrosion resistance and for how it holds a polish through repeated heat cycles.

How difficult is the installation?

Level-1. The outlet is reachable at the rear valance without a lift, so the job is loosening the factory ball and socket clamp, sliding the old outlet off, fitting the tip and re-clamping it. Set the alignment by eye against the valance before final torque, and replace the clamp if its sealing face is scored.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

Fabspeed Deluxe Oval Style Right-Side Tip for 964 Porsche 911 Carrera

Fabspeed’s Right-Side Tip for 964 Porsche 911 Carrera is the detail that finishes an air-cooled 911, the one piece of the exhaust an owner actually looks at. The factory outlet was designed to disappear. This one is a mirror-polished 4.5 inch oval, mandrel-bent from T304L stainless steel in Fort Washington, Pennsylvania, and lined through the mouth so the tip reads as finished from any angle. It bolts to the stock secondary muffler using the car’s own ball and socket clamp, with nothing cut, nothing welded and nothing permanent. On a 964 kept close to standard, it is the smallest change that still looks deliberate from ten feet away.

Bolt-On and Go

The Right-Side Tip for 964 Porsche 911 Carrera installs with hand tools and does not require a lift, because the outlet sits at the rear valance and releases with the factory clamp. It fits the stock 964 secondary muffler and equally a 964 secondary Cup-style muffler bypass pipe, so owners running the Fabspeed Secondary Muffler Bypass (FS.POR.964.SMB) finish the car properly instead of leaving a bare pipe end on show.

Features

Mirror-polished 4.5 inch oval outlet, lined through the mouth of the tip
Direct replacement for the factory 964 right-side outlet
Mandrel-bent T304L stainless steel construction
Female flare inlet reuses the Porsche OEM ball and socket clamp
Bolts to the stock 964 secondary muffler or to a 964 secondary Cup-style muffler bypass pipe
Sold individually as a single right-side tip
DIY bolt-on installation, no cutting, no welding and no lift required, Level-1 install difficulty
Backed by the Fabspeed lifetime warranty

Applications

Porsche 911 Carrera 2: 964 | 1990-1994 | 3.6L F6
Porsche 911 Carrera 4: 964 | 1989-1994 | 3.6L F6
Porsche 911 Carrera RS: 964 | 1992-1993 | 3.6L F6
Porsche 911 RS America: 964 | 1993-1994 | 3.6L F6
Porsche 911 Speedster: 964 | 1993-1994 | 3.6L F6

Notes

Fits 964 Carrera coupes, cabriolets, targas, RS and Speedster models
Bolts to the stock 964 secondary right rear muffler or to a 964 secondary Cup-style muffler bypass pipe such as the Fabspeed Secondary Muffler Bypass for 964 Porsche 911 Carrera (FS.POR.964.SMB)
Not for the 964 Turbo, which takes the Fabspeed Deluxe Oval Style Tips for 964 Porsche 911 C2 Turbo instead
Reuses the factory Porsche ball and socket clamp; inspect the clamp while the outlet is off and replace it if the ball face is scored
All Fabspeed products are expected to ship within one week of order, and timelines are often much quicker

Frequently Asked Questions

Will the Fabspeed Right-Side Tip for 964 fit my Porsche 911 Carrera? Yes. The Right-Side Tip for 964 fits every 964 Carrera built from 1989 to 1994, coupes, cabriolets and targas alike, along with the Carrera RS, RS America and Speedster. It replaces the factory right-side outlet directly and reuses the Porsche ball and socket clamp, so no cutting, welding or adapters are needed to fit it.
Does this tip only work with the stock muffler? No. Fabspeed builds it to bolt to the stock 964 secondary right rear muffler or to any 964 secondary Cup-style muffler bypass pipe, including the Fabspeed Secondary Muffler Bypass. Owners who have already fitted a bypass pipe can run this tip on it and keep a finished outlet at the valance rather than an exposed pipe end.
Is this sold as a pair? No. It is sold individually as a single right-side tip, because the 964 Carrera runs one outlet on the right and this piece replaces that outlet. Owners of the 964 Turbo need the dual C2 Turbo tip set instead, which is a separate part and a separate fitment.
What size is the tip and what is it made from? The outlet measures 4.5 inches in oval form and the tip is mandrel-bent T304L stainless steel, mirror polished and lined through the mouth. T304L is the same grade Fabspeed uses in its exhaust systems, chosen for corrosion resistance and for how it holds a polish through repeated heat cycles.
How difficult is the installation? Level-1. The outlet is reachable at the rear valance without a lift, so the job is loosening the factory ball and socket clamp, sliding the old outlet off, fitting the tip and re-clamping it. Set the alignment by eye against the valance before final torque, and replace the clamp if its sealing face is scored.

About Fabspeed

Fabspeed Motorsport builds its exhaust hardware in Fort Washington, Pennsylvania, out of a 26,000 square foot facility that doubles as a gathering point for the Porsche Club of America, Ferrari, McLaren and Lamborghini clubs. Every product is designed, engineered, dyno tested, street driven and raced in-house rather than farmed out, and the company works directly with race engine builders and tuners in Italy, Germany and the United States. Systems are fabricated from aerospace-grade austenitic stainless steel, titanium and carbon fiber, and every Fabspeed performance part carries the company’s lifetime warranty.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

Fabspeed Deluxe Oval Style Right-SideTip for 964 Porsche 911 Carrera [FS.POR.964.SROTP]

Guaranteed Safe Checkout

Fabspeed Deluxe Oval Style Right-Side Tip for 964 Porsche 911 Carrera

Bolt-On and Go

Features

Applications

Notes

Frequently Asked Questions

About Fabspeed

Reviews