What comes in the EXEDY Hyper Series Accessory Kit TYAK100?

The TYAK100 kit carries a release bearing and clutch alignment tool for the Echo, xA and xB. EXEDY packages these parts separately from its Hyper Series clutches so that the items needed to install the clutch arrive matched to it, rather than being sourced one at a time from the factory parts catalog before the job can start.

Which clutches need this kit?

The EXEDY Hyper Series clutches listed for the Echo, xA and xB call for kit TYAK100. EXEDY describes the Hyper Series Accessory Kit as the set of parts needed for a full install of a Hyper Series clutch, so the kit and the clutch belong in the same order for the Echo, xA and xB.

Is the accessory kit included with an EXEDY Hyper clutch?

No. EXEDY sells its Hyper Series clutches and the matching accessory kits under separate part numbers, and TYAK100 is the kit listed for the Echo, xA and xB. Ordering both at once means the parts are on hand when the transmission comes out, which saves a second job later and keeps the installation on the schedule the shop planned.

Why replace the bearings when fitting a new clutch?

The release bearing and pilot bearing wear alongside the clutch, and reaching either one means removing the transmission. Fitting new bearings with a new EXEDY clutch on the Echo, xA and xB stops an old bearing from failing after the work is done, and it is the combination EXEDY specifies when it sells a Hyper clutch for a full installation.

Does the TYAK100 kit fit every Echo, xA and xB?

Not necessarily. Turn 14 lists TYAK100 for the 2000-2005 Toyota Echo and 2004-2006 Scion xA and xB. EXEDY assigns its accessory kits by clutch rather than by model alone, so confirm that the Hyper Series clutch being fitted names TYAK100 before ordering, and the second-generation xB of 2008 on is not listed.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

EXEDY Hyper Series Accessory Kit for Toyota Echo and Scion xA and xB

EXEDY’s Hyper Series Accessory Kit for Toyota Echo and Scion xA and xB covers the 1NZ-FE small cars that found a second life in tuner and grassroots racing circles. The kit carries a release bearing and an alignment tool, the parts EXEDY sets aside for a Hyper clutch installation on these light front-drive cars.

Features

Matched by EXEDY to the Hyper Series clutch for the Echo, xA and xB
Release bearing for the factory release arrangement
Alignment tool to center the clutch discs during assembly
EXEDY part number TYAK100, sold separately from the clutch

What’s Included

Release bearing
Clutch alignment tool

Applications

Scion xA: 2004-2006
Scion xB: 2004-2006
Toyota Echo: 2000-2005

Notes

Required with the EXEDY Hyper Series clutch for this application; the clutch is sold separately

Frequently Asked Questions

What comes in the EXEDY Hyper Series Accessory Kit TYAK100? The TYAK100 kit carries a release bearing and clutch alignment tool for the Echo, xA and xB. EXEDY packages these parts separately from its Hyper Series clutches so that the items needed to install the clutch arrive matched to it, rather than being sourced one at a time from the factory parts catalog before the job can start.
Which clutches need this kit? The EXEDY Hyper Series clutches listed for the Echo, xA and xB call for kit TYAK100. EXEDY describes the Hyper Series Accessory Kit as the set of parts needed for a full install of a Hyper Series clutch, so the kit and the clutch belong in the same order for the Echo, xA and xB.
Is the accessory kit included with an EXEDY Hyper clutch? No. EXEDY sells its Hyper Series clutches and the matching accessory kits under separate part numbers, and TYAK100 is the kit listed for the Echo, xA and xB. Ordering both at once means the parts are on hand when the transmission comes out, which saves a second job later and keeps the installation on the schedule the shop planned.
Why replace the bearings when fitting a new clutch? The release bearing and pilot bearing wear alongside the clutch, and reaching either one means removing the transmission. Fitting new bearings with a new EXEDY clutch on the Echo, xA and xB stops an old bearing from failing after the work is done, and it is the combination EXEDY specifies when it sells a Hyper clutch for a full installation.
Does the TYAK100 kit fit every Echo, xA and xB? Not necessarily. Turn 14 lists TYAK100 for the 2000-2005 Toyota Echo and 2004-2006 Scion xA and xB. EXEDY assigns its accessory kits by clutch rather than by model alone, so confirm that the Hyper Series clutch being fitted names TYAK100 before ordering, and the second-generation xB of 2008 on is not listed.

About EXEDY

EXEDY Corporation of Neyagawa, Osaka, traces its clutch business back to 1923 and built its name as Daikin Clutch before adopting the EXEDY brand. It is a leading original-equipment maker of clutches and powertrain parts, and its racing line supplies Hyper Series multi-plate clutches for drag, circuit and rally use. EXEDY Globalparts Corporation, its wholly owned US subsidiary, supports the range in North America.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

EXEDY Hyper Series Accessory Kit for Toyota Echo and Scion xA and xB [TYAK100]

Guaranteed Safe Checkout

EXEDY Hyper Series Accessory Kit for Toyota Echo and Scion xA and xB

Features

What’s Included

Applications

Notes

Frequently Asked Questions

About EXEDY

Reviews