What comes in the EXEDY Hyper Series Accessory Kit FJAK100?

The FJAK100 kit carries a release bearing, pilot bearing and clutch alignment tool for the Impreza WRX and WRX STI. EXEDY packages these parts separately from its Hyper Series clutches so that the items needed to install the clutch arrive matched to it, rather than being sourced one at a time from the factory parts catalog before the job can start.

Which clutches need this kit?

EXEDY names kit FJAK100 on its Hyper Series clutch part numbers FH02SD1, FH01SD1, FM022HD, FM013HB, FM022SDL, FM012SDL, FM022SD, FM012SD and FM023SB for the Impreza WRX and WRX STI. EXEDY describes the Hyper Series Accessory Kit as the set of parts needed for a full install of a Hyper Series clutch, so the kit and the clutch belong in the same order for the Impreza WRX and WRX STI.

Is the accessory kit included with an EXEDY Hyper clutch?

No. EXEDY sells its Hyper Series clutches and the matching accessory kits under separate part numbers, and FJAK100 is the kit listed for the Impreza WRX and WRX STI. Ordering both at once means the parts are on hand when the transmission comes out, which saves a second job later and keeps the installation on the schedule the shop planned.

Why replace the bearings when fitting a new clutch?

The release bearing and pilot bearing wear alongside the clutch, and reaching either one means removing the transmission. Fitting new bearings with a new EXEDY clutch on the Impreza WRX and WRX STI stops an old bearing from failing after the work is done, and it is the combination EXEDY specifies when it sells a Hyper clutch for a full installation.

Does the FJAK100 kit fit every WRX and WRX STI?

Not necessarily. Turn 14 lists FJAK100 for the 2002-2014 Impreza WRX and WRX STI, the 2017-2020 WRX STI, the 2004-2005 Forester XT, 2007-2009 Legacy GT and 2005 Saab 9-2X Aero. EXEDY assigns its accessory kits by clutch rather than by model alone, so confirm that the Hyper Series clutch being fitted names FJAK100 before ordering, because EXEDY uses FJAK101 and FJAK102 elsewhere in the Subaru range.

Description

Additional Info

Shipping policy

BP PRICING DIFFERENCE

Reviews

Product Inquiry

Description

EXEDY Hyper Series Accessory Kit for GD Subaru Impreza WRX and WRX STI

EXEDY’s Hyper Series Accessory Kit for GD Subaru Impreza WRX and WRX STI is the part number EXEDY prints on nine of its Subaru Hyper clutch kits, from the Hyper Single to the triple-plate. Turbocharged EJ cars are where EXEDY multi-plates earn their keep, and FJAK100 makes sure the bearings and the alignment tool are on the bench before the transaxle is pulled.

Features

Matched by EXEDY to the Hyper Series clutch for the Impreza WRX and WRX STI
Release bearing for the factory release arrangement
Pilot bearing for the input shaft support at the crankshaft
Alignment tool to center the clutch discs during assembly
EXEDY part number FJAK100, sold separately from the clutch

What’s Included

Release bearing
Pilot bearing
Clutch alignment tool

Applications

Saab 9-2X Aero: 2005
Subaru Forester XT: 2004-2005
Subaru Impreza WRX: GD | 2002-2005
Subaru Impreza WRX STI: 2004-2014
Subaru Legacy GT: 2007-2009
Subaru WRX STI: VA | 2017-2020

Notes

Required with the EXEDY Hyper Series clutch for this application; the clutch is sold separately
Used with these EXEDY Hyper Series clutches: for the Subaru Impreza WRX STI and VA WRX STI, EXEDY Hyper Twin (Rigid Disc, HR), EXEDY Hyper Single, EXEDY Hyper Twin (Sprung Disc, HD), EXEDY Hyper Twin (Sprung Disc, SD), EXEDY Hyper Compe-D Twin and EXEDY Hyper Triple (Rigid Disc, SB); for the GD Subaru Impreza WRX, Forester XT and Saab 9-2X Aero, EXEDY Hyper Single; for the GD Subaru Impreza WRX and Saab 9-2X Aero, EXEDY Hyper Triple, EXEDY Hyper Compe-D Twin and EXEDY Hyper Twin

Frequently Asked Questions

What comes in the EXEDY Hyper Series Accessory Kit FJAK100? The FJAK100 kit carries a release bearing, pilot bearing and clutch alignment tool for the Impreza WRX and WRX STI. EXEDY packages these parts separately from its Hyper Series clutches so that the items needed to install the clutch arrive matched to it, rather than being sourced one at a time from the factory parts catalog before the job can start.
Which clutches need this kit? EXEDY names kit FJAK100 on its Hyper Series clutch part numbers FH02SD1, FH01SD1, FM022HD, FM013HB, FM022SDL, FM012SDL, FM022SD, FM012SD and FM023SB for the Impreza WRX and WRX STI. EXEDY describes the Hyper Series Accessory Kit as the set of parts needed for a full install of a Hyper Series clutch, so the kit and the clutch belong in the same order for the Impreza WRX and WRX STI.
Is the accessory kit included with an EXEDY Hyper clutch? No. EXEDY sells its Hyper Series clutches and the matching accessory kits under separate part numbers, and FJAK100 is the kit listed for the Impreza WRX and WRX STI. Ordering both at once means the parts are on hand when the transmission comes out, which saves a second job later and keeps the installation on the schedule the shop planned.
Why replace the bearings when fitting a new clutch? The release bearing and pilot bearing wear alongside the clutch, and reaching either one means removing the transmission. Fitting new bearings with a new EXEDY clutch on the Impreza WRX and WRX STI stops an old bearing from failing after the work is done, and it is the combination EXEDY specifies when it sells a Hyper clutch for a full installation.
Does the FJAK100 kit fit every WRX and WRX STI? Not necessarily. Turn 14 lists FJAK100 for the 2002-2014 Impreza WRX and WRX STI, the 2017-2020 WRX STI, the 2004-2005 Forester XT, 2007-2009 Legacy GT and 2005 Saab 9-2X Aero. EXEDY assigns its accessory kits by clutch rather than by model alone, so confirm that the Hyper Series clutch being fitted names FJAK100 before ordering, because EXEDY uses FJAK101 and FJAK102 elsewhere in the Subaru range.

About EXEDY

EXEDY Corporation of Neyagawa, Osaka, traces its clutch business back to 1923 and built its name as Daikin Clutch before adopting the EXEDY brand. It is a leading original-equipment maker of clutches and powertrain parts, and its racing line supplies Hyper Series multi-plate clutches for drag, circuit and rally use. EXEDY Globalparts Corporation, its wholly owned US subsidiary, supports the range in North America.

Additional Information

The Bulletproof Automotive website contains many thousands of products purchased in multiple different currencies. All of the prices are entered manually and accurately at the time of entry. Due to the consistently fluctuating international exchange rates, at times prices may not be able to be honored at their original intended rate. We apologize for any inconvenience this may cause, unfortunately our website is unable to compensate dynamically for what can at times be volatile changes in the cost of items due to currency values fluctuating, changes in prices from suppliers, changes in shipping and import duties, and other factors. Rest assured that any order you place on line will be at zero risk to you in this area. If in the event your order cannot be fulfilled at the original intended website price we will offer you a 100% refund, no questions asked. We will continue to do our best to maintain updated prices and we will always continue to offer our price match guarantees as well to ensure our prices are always the best for you. In short, prices may change without notice. It is always advised to give us a call prior to placing your order online to confirm availability and to confirm current pricing.

Shipping Policy

Items that are in stock in the US, either at Bulletproof’s warehouse or at a supplier’s warehouse, are generally delivered within 7-10 days. Special order items from overseas take considerably longer. As a courtesy Bulletproof offers delivery estimates to our customers which take into consideration manufacturer availability and shipping schedule. These estimates represent our best guess based on previous orders from the manufacturer and do not in any way imply a guaranteed delivery window. Many manufacturers work in a “just in time” inventory system and often take 2-20+ weeks to produce an item once an order is submitted. All deliverable items are then sent to our Japanese warehouse. Bulletproof ships a minimum of one full ocean freight container every month from Japan, oftentimes more than one a month. Ocean freight takes an average of 4 weeks. Typically it breaks down to one week in Japan for paperwork and customs, two weeks by boat and one week in US customs/clearance. Due to the wide number of variables between manufacturer and shipping schedules, delivery estimates are simply just that – estimates. We attempt to estimate conservatively and we usually deliver faster than our estimates suggest. It is not Bulletproof’s policy to guarantee delivery time of any special order item, this is impossible for us to do. By ordering you acknowledge that there is no required delivery ETA and an order may not be canceled or altered due to manufacturing or shipping delays, all ETA’s are provided as a best guess only. Please review the full Terms & Conditions here.

BP Pricing Difference

We do pricing a little differently on our JDM brands and we believe in making things simple and clear. No hidden fees or surcharges. Every price you see includes the shipping cost to our office in Los Angeles, California and all the associated taxes/duties/fees for bringing the products into the US. The only shipping you ever pay is from our facility in the US to your location. Be wary of resellers that don’t include the cost of international shipping in their pricing on JDM parts. While we believe we’ll always have the lowest all-in price on JDM products, we offer a price match guarantee for all authentic parts purchased from authorized dealers as well. For many international customers, it’s much more affordable to ship from the USA than from Japan directly, as the air freight and ocean freight costs are typically much less. However, for customers looking to ship directly from Japan outside of North America, or domestically in Japan, we can provide pricing specifically for that scenario. Please do not hesitate to contact us with any pricing questions or concerns. Please email us at sales@bulletproofautomotive.com with any inquiries.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Inquiry

First Name (*required)

Last Name (*required)

Your E-Mail (*required)

Telephone Number (*required)

Country (*required)

Vehicle Year / Make / Model (*required)

Please Explain What do you want to do with your vehicle

Additional Information (optional)

I agree to the terms & conditions and privacy policy and to have Bulletproof Automotive LLC contact me for promotion, marketing and other purposes via email, phone or SMS message.

EXEDY Hyper Series Accessory Kit for GD Subaru Impreza WRX and WRX STI [FJAK100]

Guaranteed Safe Checkout

EXEDY Hyper Series Accessory Kit for GD Subaru Impreza WRX and WRX STI

Features

What’s Included

Applications

Notes

Frequently Asked Questions

About EXEDY

Reviews